1 / 7

Chemical Engineering 475 Unit Operations Laboratory

Chemical Engineering 475 Unit Operations Laboratory. Good Writing: Exercises. General Issues. Equations – font consistency, define variables, do not use * or ^, or MathCad notation Use leading zeros, be careful with significant figures: .954 should be 0.954 ; 4.6823894 ± 0.1261325

trina
Download Presentation

Chemical Engineering 475 Unit Operations Laboratory

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Chemical Engineering 475Unit Operations Laboratory Good Writing: Exercises

  2. General Issues • Equations – font consistency, define variables, do not use * or ^, or MathCad notation • Use leading zeros, be careful with significant figures: • .954 should be 0.954 ; 4.6823894 ± 0.1261325 • “Data” is a plural word. • Number and title a table above the table. Number and title a figure below the figure. • Discuss all included tables and figures. • Discuss them shortly before they appear in the report. • Be careful with subject/verb agreement and with person and tense. • Focus on Precision and on Conciseness.

  3. Although there was a large margin of error in the fouling factor this configuration is the only option for the pilot plants heat exchanger.

  4. The compressibility of the gases can be found from the pressures recorded by the following equations that have been derived.

  5. Then a combination of computers and manual readings collected data on pressures drops and temperatures for the meters.

  6. The acquisition of the necessary kinetic data such as the reaction orders and reaction constants at specified temperature is carried out through experimental runs that vary either the experimental conditions of temperature or reactant ratios, or both.

  7. For better certainty could improve process. It is recommended to verify current results to lower error in process.

More Related