1 / 18

Polarized Internal Gas Target in a Strong Toroidal Magnetic Field

Polarized Internal Gas Target in a Strong Toroidal Magnetic Field. E.Ihloff, H.Kolster, N.Meitanis, R.Milner, A.Shinozaki, E.Tsentalovich, V.Ziskin, Y.Xiao, C.Zhang. MIT-Bates South Hall Ring. Electron energy – 850 MeV Average current – 175 mA Polarization – 67 %. TARGET. BEAM. BEAM.

Download Presentation

Polarized Internal Gas Target in a Strong Toroidal Magnetic Field

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Polarized Internal Gas Target in a Strong Toroidal Magnetic Field E.Ihloff, H.Kolster, N.Meitanis, R.Milner, A.Shinozaki, E.Tsentalovich, V.Ziskin, Y.Xiao, C.Zhang

  2. MIT-Bates South Hall Ring • Electron energy – 850 MeV • Average current – 175 mA • Polarization – 67 %

  3. TARGET BEAM BEAM BLAST • Toroidal field 3.8 kG • 2 instrumented sectors in the horizontal plane - Drift chambers - Cerenkov detectors - Time of Flight scintillators - Neutron detectors BLAST DATA: 2004, Hydrogen - Pz78%, 81 pb-1 2004, Deuterium - Pz84%, 130 pb-1 Pzz68% 2005, Deuterium - Pz72%, 180 pb-1 Pzz56%

  4. BLAST detector

  5. ABS inside BLAST ABS location inside BLAST detector results in severe space limitations ABS is operated inside 2 kG magnetic field.

  6. ABS in BLAST magnetic field

  7. Measuring residual gas attenuation

  8. Sextupole magnets in uniform field IDEAL SEXTUPOLE SEXTUPOLE + - the amplitude of the force doesn’t change - the direction does

  9. Variation of focusing force components with a polar angle

  10. Simulations results at the entrance into the cell BLAST field on (B0=2 kGs) T=14% BLAST field off T=34%

  11. Major ABS modifications • Pumping speed and conductances increased • NEG pumps replaced with shielded cryopumps • Sextupoles incased in magnetic shields

  12. MFT field profile Blast field leaks into RF transitions units and affects both magnitude and gradient of magnetic field. 14 34

  13. Dipole BRP ABS Storage cell Aperture Dipole magnet 2.5 kG/cm Compression tubes

  14. 1 1 1 3 3 3 6 6 6

  15. Collimator Beam Storage cell: L=60 cm D=1.5 cm Collimator Collimator protects the cell against both SR and injection flashes It is designed to minimize the detector background

  16. The cell protected by the collimator showed no signs of degradation in several months of running • D-target was flipped between 3 polarization states: V+ (Pzz=1; Pz=+1) V- (Pzz=1; Pz=-1) T- (Pzz=-2; Pz=0) • Intensity and tensor polarization were monitored using elastic eD reaction • Vector polarization was monitored using inelastic ep channel • H-target was flipped between 2 polarization states: V+ ( Pz=+1) V- ( Pz=-1) • Intensity and vector polarization were monitored using elastic ep reaction

  17. Conclusion • Operation of ABS inside magnetic spectrometer presents a formidable challenge, but it is possible ! • Atomic flux of at/sec into the cell was achieved for both Hydrogen (1 state) and Deuterium (2 states) • The target thickness within ±20 cm from the center of the cell achieves • Drifilm-coated storage cell, protected by tungsten collimator, provides excellent preservation of polarization of Deuterium atoms with a 500 G holding field: Pz=84 %; Pzz=68% • Hydrogen target polarization Pz=78 %

More Related