1 / 23

MODELLING & torque pulsation reduction OF Switched reluctance motor

MODELLING & torque pulsation reduction OF Switched reluctance motor. G.PRASHANT Edited By Sarath S Nair www.technologyfuturae.com. contents. INTRODUCTION CONSTRUCTIONAL FEATURES OPERATING PRINCIPLE SYSTEM DESCRIPTION AND MODELING STUDY OF TORQUE PULSATION ADVANTAGES APPLICATIONS

traci
Download Presentation

MODELLING & torque pulsation reduction OF Switched reluctance motor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. www.technologyfuturae.com MODELLING & torque pulsation reduction OF Switched reluctance motor G.PRASHANT Edited By Sarath S Nair www.technologyfuturae.com

  2. www.technologyfuturae.com contents • INTRODUCTION • CONSTRUCTIONAL FEATURES • OPERATING PRINCIPLE • SYSTEM DESCRIPTION AND MODELING • STUDY OF TORQUE PULSATION • ADVANTAGES • APPLICATIONS • CONCLUSION

  3. www.technologyfuturae.com INTRODUCTION • The name switched reluctance describes two features : a) switched- the m/c must be operated in continuous switching mode b) reluctance- it is the true reluctance m/c in the sense that both stator and rotor have variable reluctance magnetic circuit • It is a double salient machine. • It illuminates permanent magnet, brushes & commutators. • Due to inherent simplicity it has reliable and low-cost variable-speed drive

  4. www.technologyfuturae.com Constructional • Stator consist of steel laminations forming the salient pole • With no rotor winding,the rotor is basically a piece of steel (and laminations) shaped to form salient poles. Hence no Cu loss in rotor winding • It is the only motor with salient poles in rotor & stator.

  5. www.technologyfuturae.com 6/4 switched reluctance machine with one phase excited

  6. www.technologyfuturae.com Operating principle • One phase of stator is energized at a time by dc voltage pulses. • The rotor experiences a torque and moves to a position to align with stator pole so that the reluctance is minimum & inductance is maximum. • If rotor continues past the aligned position braking torque is produced • Current is switched off to remove this condition of breaking torque

  7. www.technologyfuturae.com MATHEMATICAL MODEL OF SR MOTOR • The motor is single phase excited ; that is it carries one winding on the stator. • The excited winding is wound on the stator & the rotor is free to rotate.

  8. www.technologyfuturae.com SYSTEM DESCRIPTION

  9. www.technologyfuturae.com Contd.. • System consists of four major parts- motor, current-regulated converter , controller and sensors • Controller computes the error and outputs the current command to the converter • Sensors used are current and speed sensors • System consists of current and speed loop only

  10. www.technologyfuturae.com MODELING • Stationary frame model • Self-inductance of the motor is related to the position of rotor • Assuming self-inductance of each phase isn’t related to its phase current • The flux linkage of the rotor can be expressed as • Where j=a,b,c

  11. www.technologyfuturae.com Contd.. • The dynamic equation of each phase voltage is • And the torque equation is given as

  12. www.technologyfuturae.com Contd… • Synchronous frame model the transformation from abc to dq axis can be expressed as

  13. www.technologyfuturae.com Contd.. • The synchronous d-q axis voltage equation are • The torque equation is

  14. www.technologyfuturae.com TORQUE PULSATION • Major disadvantage of SRM is that its torque pulsation is larger than other machines • Self-inductance’s value changes according to the position of stator and rotor • From the self-inductance waveform the current control commands can be obtained for producing maximum and minimum torque

  15. www.technologyfuturae.com Contd.. • The real self-inductance can be expressed as • Where j=a,b,c. • ϴe=Nrϴrm • ϴrm= mechanical shaft angle

  16. www.technologyfuturae.com Contd.. • Neglecting the harmonic components and hence considerring only the fundamental components • where L’j is the values of the self-inductances in the abc stationary frame. • its approximate value in dq synchronous frame is

  17. www.technologyfuturae.com • The equivalent value obtained is

  18. www.technologyfuturae.com ADVANTAGES • Performance- much greater torque output • Low cost- low manufacturing cost, low material & maintenance cost. It does not use magnets. • Cooling- most of the heat is generated in which is relatively easy to cool.

  19. www.technologyfuturae.com applications • SRMs are used in some washing machine designs. • SRM drives are ideal for aircraft applications such as a jet engine starter motor generator. • Bearingless switched reluctance motor for all electric propulsion system

  20. www.technologyfuturae.com summary • The construction, operating principle & key features of switched reluctance motor are explained. • The mathematical model & flux linkage characteristics are analysed. • The torque pulsation problem of the switch reluctance motor was also discussed

  21. www.technologyfuturae.com references [1] Miller, 7: J. E., Switched Reluctance Motors and Their Control, Clarendon Press, Oxford, 1992. [2] R. Krishnan, Switched Reluctance Motor Drives: Modelling, Simulation, Analysis, Design, and Applications, CRC Press, 2001 [3] R. S. Wallace, D. G, Taylor, "A balanced commutator for switched reluctance motors to reduce torque ripple," IEEE Trans. Pow. Electron., vol. PE-7, 110. 4, pp. 617-626, Oct. 1992. [4] D. S. Reay, M. M. Moud, T. C. Green, and B. W.Williams, "Switched reluctance motor control via fuzzy adaptive systems," IEEE Control Systemsvol. 15, no. 3, pp. 8-15, June 1995.

  22. Technical Presentations, Research Reviews, New designs & Developments TechnologyFuturae Log On to www.technologyfuturae.com

  23. www.technologyfuturae.com THANK YOU

More Related