1 / 10

HES Simulation Log May. ‘07 Part1

HES Simulation Log May. ‘07 Part1. Resolution Scan. Same EQ1, EQ2 strength. dp/p in s (*10 -4 ). 10 th Matrix. Some strange shape on Q1. cut w/ abs(YFP)<1cm. YQ1i vs Ypt. cut this part. Unique event in “tilt method” Should be checked using TOSCA. Matrix Improved!.

tiger-vaughan
Download Presentation

HES Simulation Log May. ‘07 Part1

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. HES Simulation LogMay. ‘07 Part1

  2. Resolution Scan Same EQ1, EQ2 strength dp/p in s (*10-4) 10th Matrix

  3. Some strange shape on Q1 cut w/ abs(YFP)<1cm

  4. YQ1i vs Ypt cut this part Unique event in “tilt method” Should be checked using TOSCA

  5. Matrix Improved! Using 6th order matrix s=0.68*10-4

  6. About Detector Plane • There are no difference in resolution between rotated Detector Plane (hardware Spectrometer) and non-rotated Detector Plane (software spectrometer) Apply non-rotated Detector Plane EDC D.P • Outside Detector Plane has very bad pos. resolution (even in the case of no M.S.) EDC • Detector Plane(=EDC) should be placed as far from ED as possible

  7. EDC Position Study 1

  8. EDC Position Study 2 Install EDC in Geant4 1m from ED, Detector Plane is also 1m Position resolution in each plane is 300mm mm

  9. EDC Position Study 3 ??? Bug?

  10. Next • HES Resolution Study w/ EDC, Detector Plane Position • Strange shape study in Q1y vs y’t • TOSCA map study

More Related