1 / 16

Hur får man system att uppföra sig som man vill? Reglerteknik och intressanta tillämpningar

Hur får man system att uppföra sig som man vill? Reglerteknik och intressanta tillämpningar. Carl-Fredrik Lindberg, 2013-04-25. Single and Double Inverted Pendulum Movie found on internet http:// vimeo.com/2952236. Automatic Control (“ Reglerteknik ” in Swedish ).

thi
Download Presentation

Hur får man system att uppföra sig som man vill? Reglerteknik och intressanta tillämpningar

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Hur får man system att uppföra sig som man vill? Reglerteknik och intressanta tillämpningar Carl-Fredrik Lindberg, 2013-04-25

  2. Single and Double Inverted PendulumMovie found on internet http://vimeo.com/2952236

  3. Automatic Control (“Reglerteknik” in Swedish) Modeling the tank dynamics Tuning the PID controller • Automatic control gives: • Stability • Fast disturbance rejection • Small variations in controlled variables • Etc.

  4. How a control engineer sees the world Non measureable disturbances Measureable disturbances Feed-forward Measurement noise Set-points Controller Process Measured outputs Control signals Σ Feedback

  5. Automatic Control • Modeling • Physical models, grey-box, black-box, … • Controller design • Feedback, feedforward, stability, performance, robustness, adaptive, … • Estimation • States, model parameters, … • Diagnostics • Fault detection and isolation, … • Optimization

  6. Project examples

  7. EM Stabilizer in Galvanizing Lines Stabilization of strip gives reduced zinc over-coating

  8. EM Stabilizer in Galvanizing Lines Improved strip position damping with EM Stabilizer

  9. Water model EM Control Control of the steel flow in the mold gives higher steel quality Continuous casting process Validation of model with PIV measurements in water model Simulation of the flow

  10. Paper Machine Steam Energy Fingerprint By quantifying steam flows and identifying energy waste, suggestions on how to improve energy efficiency are given

  11. Arc Furnace Control By control, optimization and EMS, the yield, energy efficiency and productivity is increased

  12. SVC Voltage Control with FeedforwardImproved disturbance rejection after TSC switching

  13. Wireless Control • New possibilities with wireless control • Increased flexibility to install sensors • Cost for wiring disappears • Large challenges • Reliability • Latency • Safety • Co-existence with other wireless systems • 90% of the communication could often be saved by smarter sampling • Different sampling strategies have been developed • Sample as seldom as possible without losing control performance • Taking into account that information packages may be delayed or lost

  14. Diagnostics Process section diagnostics • Faults are both detected and isolated • Fault examples: • Detection of bias in a sensor • Detection of clogging of a valve • Detection of erosion in a pump • Track heat transfer rate in heat exchanger • Benefits: • Early detection gives higher availability • Reduced maintenance costs. • Avoids wrong dosing when sensor has drifted. Control loop diagnostics • On-line methods which automatically alarms for poor control loop performance. • Examples • Detection of oscillations and changed signal variance. • Control performance measurements, Harris index etc. • Classification of some faults, e.g. valve stiction, external disturbances. Example of fault isolation. The red bar indicates the most probable faulty signal.

  15. Waste Water TreatmentSome examples from my Ph.D. Adaptive control of external carbon flow rate Control of dissolved oxygen concentration Estimation of dissolved oxygen dynamics

  16. Thank you!Questions?

More Related