1 / 18

HMI, Photospheric Flows and ILCT

HMI, Photospheric Flows and ILCT . Brian Welsch, George Fisher, Yan Li, & the UCB/SSL MURI & CISM Teams. Correlation Tracking. Image Deprojection. Output Pipeline. HMI Team Mtg., 2006. M3: Mag Data Products.

thetis
Download Presentation

HMI, Photospheric Flows and ILCT

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. HMI, Photospheric Flows and ILCT Brian Welsch, George Fisher, Yan Li, & the UCB/SSL MURI & CISM Teams Correlation Tracking Image Deprojection Output Pipeline HMI Team Mtg., 2006 M3: Mag Data Products

  2. Velocity inversions generate a 2D map v(x1,x2)from one 2D image, f1(x1,x2), to another, f2(x1,x2). The map depends upon: • the difference f(x1,x2) = f2(x1,x2) – f1(x1,x2) • assumption(s) relating v(x1,x2) to f/t, e.g.: • continuity equation, f/t + t(vtf) = 0, or • advection equation, f/t + (vtt)f = 0, etc. Based on the assumption chosen, v(x1,x2) is not necessarily velocity – e.g., group velocity of interference patterns.

  3. Local correlation tracking (LCT) finds v(x1,x2) by correlating subregions; it assumes advection. = * = = 4) v(xi, yi) is inter- polated max. of correlation funct 1) for ea. (xi, yi) above |B|threshold… 2) apply Gaussian mask at (xi, yi) … 3) truncate and cross-correlate… HMI+AIA, M3: Mag Data Products

  4. Demoulin & Berger (2003) argued that LCT applied to magnetograms does not necessarily give plasma velocities. The apparent motion of flux on the photosphere, uf, is a combination of horizontal flows and vertical flows acting on non-vertical fields. uf vnBh-vhBn is the flux transport velocity • uf is the apparent velocity (2 components) • v is the actual plasma velocity (3 comps)

  5. The magnetic induction equation’s normal component relates velocities to dBn/dt. Bn/t = h(vnBh-vhBn) = -h(ufBn) • In fact, -h(uLCTBn) only approximatesBn/t, so uLCT uf • Inductive LCT (ILCT) finds uf that matches Bn/t exactly and closely matches uLCT. • Writing ufBn = -h + h x( n), we find • via Bn/t = h2 •  by assuming uf = uLCT, so h2 = - h x(uLCTBn) HMI+AIA, M3: Mag Data Products

  6. Doppler shifts ( vn) can’t distinguish between flows paral-lel to B, perpendicular to B, or in an intermediate direction. • Since Bn/t =  x (v x B), flows v|| along B do not affect Bn/t, so “inductive flow” methods only determine v. • Once v is known, the measured Doppler shift allows determination of v||.

  7. Aside: fundamentally, two components of uf(x1,x2) cannot determine three components of plasma velocity, v(x1,x2). • Hence, other velocity fields v(x1,x2) consistent with Bn/t can be found. • Other techniques available include: • Minimum Energy Fit (MEF, Longcope, 2004) • Differential LCT (DLCT) & Differential Affine Velocity Estimator (DAVE) (Schuck, 2006) HMI+AIA, M3: Mag Data Products

  8. The FLCT code’s current version combines pro- grams written in IDL & C, and open source code. • IDL • C • Standard C library routines: stdio.h, stdlib.h, math.h • Fastest Fourier Transform in the West (FFTW), v. 3.0 • The executable has been compiled & tested on several architectures. • Linux • Solaris • Windows • Macintosh

  9. Matching HMI’s 10-minute vector magnetogram cadence will be challenging. • HMI has Npix ~ 107 pixels within 60o of disk center. • - MDI’s 10242 HMI’s 40962  x 16 • - MDI, w/in ~30o HMI, w/in ~60o  x 2.5 • We track pixels with |Bn| > |B|thresh = 20G • ~ 25% of Npix at solar max. • ~ 5% of Npix at solar min. • FLCT speed is ~linear in Npix correlated. • - t ~ (1 sec/100 pix) x (2.5 x 106 pix) ~ 2.5 x 104 sec ~ 7 hr! • - at solar min., w/ |B|thresh = 100G (~1% of Npix), t ~ 20 min.

  10. Velocity estimates work from difference images, so temporal artifacts must be removed. IVM difference images of BLOS in AR 9026, with a ~4 min. cadence, show large-scale, alternating field fluctuations that inhibit accurate tracking. HMI+AIA, M3: Mag Data Products

  11. Accurate velocity estimates also require deprojection of full-disk magnetograms. • Away from disk center, flows with a component along LOS are foreshortened by curvature of the solar surface. • Conformal deprojections, e.g., Mercator, locally preserve angles; scales are distorted, but easily fixed. • This is optimal for tracking, since neither flow component is biased by the deprojection. • (Apparent changes in lengths perpendicular to the LOS from center-to-limb are negligible.)

  12. FLCT was initially tested using a known image. We found FLCT could accurately reconstruct the imposed flow.

  13. FLCT was also tested on magnetograms with imposed differential rotation – again, recovering the input flow. White dots are imposed differential rotation profile; red dots are raw velocities from Mercator projection; green are properly rescaled; white diamonds are latitudinally binned averages of green dots. HMI+AIA, M3: Mag Data Products

  14. We have implemented a preliminary, automated “Magnetic Evolution Pipeline” (MEP). http://solarmuri.ssl.berkeley.edu/~welsch/public/data/Pipeline/ • cron checks for new magnetograms with wget • New magnetograms are downloaded, deprojected, and tracked using FLCT. • The output stream includes deprojected m-grams, FLCT flows (.png graphics files & ASCII data files), and tracking parameters. • Full documentation & all codes are on line. HMI+AIA, M3: Mag Data Products

  15. Several performance-enhancing modifications to FLCT were implemented and more are planned. • Sub-pixel interpolation was made more efficient. • Correlation is now accomplished by spawning a C subroutine that employs FFTW. • FLCT is readily parallelizable; we envision this “soon.” • Computing velocities in neighborhoods, as opposed to each pixel, is another way to increase speed. HMI+AIA, M3: Mag Data Products

  16. Conclusions • Accurate flow estimates will require • deprojection of full-disk magnetograms, and • careful temporal filtering. • Matching planned data cadences will be challenging. Solutions: • parallelization • find v(x1,x2) on tiles, not every pixel • more restricitve |Bn| thresholding • Essential tools for an LCT pipeline are in place. HMI+AIA, M3: Mag Data Products

  17. References • Démoulin & Berger, 2003: Magnetic Energy and Helicity Fluxes at the Photospheric Level, Démoulin, P., and Berger, M. A. Sol. Phys., v. 215, # 2, p. 203-215. • Longcope, 2004:Inferring a Photospheric Velocity Field from a Sequence of Vector Magnetograms: The Minimum Energy Fit, ApJ, v. 612, # 2, p. 1181-1192. • Schuck, 2005:Tracking Magnetic Footpoints with the Magnetic Induction Equation, ApJ (submitted, 2006) • Welsch et al., 2004:ILCT: Recovering Photospheric Velocities from Magnetograms by Combining the Induction Equation with Local Correlation Tracking, Welsch, B. T., Fisher, G. H., Abbett, W.P., and Regnier, S., ApJ, v. 610, #2, p. 1148-1156. HMI+AIA, M3: Mag Data Products

  18. Yang’s e-mail. • “It would be great if you can talk about your ILCT method/ code • during the session. Because this session is ‘data products’ session, • … briefly summarize your algorithm first, and then focus on • addressing following issues: • Nature of the codes (Language, etc); • Additional supporting software (IDL, MATHLIB, ...); • Computational requirements (run time estimate, system requirements, etc); • Requirements for the input data & format of the output products; • Potential challenges, test procedures, target date for completion of codes, etc... • Time is 15 minutes, but … leave 5 minutes for further discussion.”

More Related