Corrosion conversion and prevention program for ust sumps
This presentation is the property of its rightful owner.
Sponsored Links
1 / 32

Corrosion Conversion and Prevention Program for UST Sumps PowerPoint PPT Presentation


  • 114 Views
  • Uploaded on
  • Presentation posted in: General

Corrosion Conversion and Prevention Program for UST Sumps. No Power Tools Required. Presented By – The Grapple Hook Group Distributors of Iron Ox Products. All Products are Nonflammable. Before Treatment. Corrosion on Copper As Well. Good Idea to remove water. Before Treatment – .

Download Presentation

Corrosion Conversion and Prevention Program for UST Sumps

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Corrosion conversion and prevention program for ust sumps

Corrosion Conversion and Prevention Program for UST Sumps

No Power Tools

Required

Presented By – The Grapple Hook Group

Distributors of Iron Ox Products

All Products are

Nonflammable


Before treatment

Before Treatment

Corrosion on Copper As Well. Good Idea to remove water


Before treatment1

Before Treatment –

Multiple Types of Corrosion


Before treatment2

Before Treatment –

Removal of blue oxidation on copper is important. Brush lightly. Wear Mask.


Corrosion conversion and prevention program for ust sumps

Be Prepared for Severe Dryness


Before treatment3

Before Treatment –

Or Sometimes Full of Wet Corroded Mukk!!!!!


Before you start supplies and tools

Before You Start – Supplies and Tools

Gloves Mask Multiple Rags

Safety Glasses Vest Cup of Water Coveralls


Before you start supplies and tools1

Before You Start – Supplies and Tools

Non Sparking Brass Scrapers & Available At Grainger


Before you start supplies and tools2

Before You Start – Supplies and Tools

Non Sparking Brass Brushes – Available and Auto & Builder Supply Stores


Before you start supplies and tools3

Before You Start – Supplies and Tools

Disposable Paint Brushes and Disposable Paint Cups. Do not put chemical back into bottle. C Stores have cups if you forget.


Before you start supplies and tools4

Before You Start – Supplies and Tools

To Speed Up Spraying – We recommend using Milwaukee Sprayer

Model A. If you plan to use, you will need portable air supply. Used For 24/7 Plus - Corrosion Inhibitor and Lubricant. If no sprayer , product can be brushed.


Before you start supplies and tools5

Before You Start – Supplies and Tools

One Pint of Iron Ox Steel Curtain Per STP Motor & Assembly

One Can of Iron Ox 24 / 7 Per STP Motor & Assembly


Before you start supplies and tools6

Before You Start – Supplies and Tools

Six to Seven Feet of ¾ or 1” PVC Tool for Each Sump. + Cutting Tool


Before you start supplies and tools7

Before You Start – Supplies and Tools

One Iron Ox Vapor Emitter Bulb and Four 6-8” plastic tie wraps per stick


Typical station view

Typical Station View

Barriers set with Cones and Tape


Open lid safely remove water

Open Lid Safely / Remove Water

Ventilate Sump Area - Expose Air.

Remove any water with rags or hand pump.


Check with safety manager for company policy on confined space entry

Check with Safety Manager for Company Policy on Confined Space Entry.


Removing rust with brass and plastic scraper and brush

Removing Rust with Brass and Plastic Scraper and Brush

Double Click If Necessary

Debris on floor can be removed manually or approve d vacuum


Removing rust with brass and plastic scraper and brush cont

Removing Rust with Brass and Plastic Scraper and Brush cont.

Segment 2 -Double Click If Necessary

Just The Gross and Rust Scale – Ok to leave Surface Rust.


Post scraping with all loose rust flakes removed

Post Scraping with all loose rust / flakes removed.

Wipe down with damp cloth after scraping to remove any dust / debris.

Remove Debris of Floor with Rag.


Rust conversion process with steel curtain

Rust Conversion Process with Steel Curtain

Segment 1 -Double Click If Necessary

Apply Steel Curtain Liberally to All Metal Surfaces in Sump Area. Only Metal Component with rust will turn dark. One pint per STP assembly.


Rust conversion process with steel curtain1

Rust Conversion Process with Steel Curtain

Segment 2 -Double Click If Necessary

Two Coats Recommended. Wait 30 Minutes Between Coats.

Be Patient! Let it dry.


Corrosion conversion and prevention program for ust sumps

Steel Curtain only affects areas with rust. No harm to plastics or other surfaces. No Polymer to interfere with future maintenance procedures.

Post Rust Conversion. Rusted Surfaces Have Turned Darker.


Apply 24 7 plus corrosion inhibitor treatment with sprayer @ 80psi

Apply 24/7 Plus Corrosion Inhibitor Treatment With Sprayer @ 80psi +

Double Click if Necessary

Two Coats. Spray First Coat 12 inches away from STP – Metal Component s. Wait 20 -30 minutes . Apply Second Coat with wide mist pattern. Use entire contents for one STP / Leak Detector.


Results

Results

Surfaces will have light tackiness and wet look.


Results1

Results

Surfaces will have light tackiness and wet look.


Results2

Results

Surfaces will have light tackiness and wet look.


Vapor emitter stick

Vapor Emitter Stick

Attached Bulb to PVC Pipe. Make sure Bulb is as close to lid as possible.

Lean or Tie. Mark date on bulb and replace with new one in6 months.

Throw away bulb. Non Hazardous.


Completed close lid

Completed - Close Lid


Maintenance and inspection

Maintenance and Inspection

Wet Look Will Wear Off First.

24/7 Corrosion Inhibitor Will Eventually Wear Off Due To Environment

We recommend repeat treatment in six months at time of vapor bulb replacement.

2nd Treatment will be much easier, less labor than first.

Wipe down copper tube with 24/7 at every opportunity.


Maintenance and inspection1

Maintenance and Inspection

Change Vapor Emitter Bulb every six months. Simply remove and replace bulb.


Questions 813 877 4665 www theironox com

Questions813-877-4665 www.theironox.com

The Grapple Hook Group

Home of the Iron Ox Products

for Maintenance, Repair and Overhaul


  • Login