Basic configuration modem d link
Download
1 / 12

BASIC CONFIGURATION MODEM D-LINK - PowerPoint PPT Presentation


  • 65 Views
  • Uploaded on

BASIC CONFIGURATION MODEM D-LINK. - CLICK SETUP - INTERNET SETUP - CLICK ADD. - PPP USERNAME : [email protected] - PPP PASSWORD : KWF2011 - CONFIRM PPP PASSWORD : KWF2011 - MTU SIZE : 1462 - MRU SIZE : 1492 ( TM D-LINK ).

loader
I am the owner, or an agent authorized to act on behalf of the owner, of the copyrighted work described.
capcha
Download Presentation

PowerPoint Slideshow about ' BASIC CONFIGURATION MODEM D-LINK' - thad


An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -
Presentation Transcript

Click setup internet setup click add
- CLICK SETUP - INTERNET SETUP - CLICK ADD


- PPP USERNAME : [email protected] PPP PASSWORD : KWF2011- CONFIRM PPP PASSWORD : KWF2011- MTU SIZE : 1462- MRU SIZE : 1492 ( TM D-LINK )


NETWORK ADDRESS TRANSLATION SETTING- DISABLE NAT : UNTICK- DISABLE FIREWALL : UNTICK- ENABLE IGMP MULTICAST ::TICK


Setup local network router ip adress 10 x x 1 subnet mask 255 255 255 0
SETUP > LOCAL NETWORK:- ROUTER IP ADRESS : 10.X.X.1- SUBNET MASK : 255.255.255.0


Dhcp server setting enable dhcp server tick dhcp ip adress range 1 x x 4 to 10 x x 254
DHCP SERVER SETTING : - ENABLE DHCP SERVER : TICK - DHCP IP ADRESS RANGE : 1.X.X.4 TO 10.X.X.254


ADVANCE > WIRELESS SETTING > WIRELESS BASIC :- ENABLE WIRELESS : TICK- WIRELESS NETWORK NAME ( SSID ) : KG_WIFI_XXXX


ADVANCE > DNS > IPV4 DNS SERVER CONFIGURATION :- PREFERRED DNS SERVER : 202.71.108.180- ALTERNATE DNS SERVER : 202.75.34.2


ADVANCE > NETWORK TOOL > SNMP :- ENABLE SNMP AGENT : TICK- READ COMMUNITY : CBC2HOME- SET COMMUNITY : CBC2HOME- SYSTEM NAME : NAME SITE - SYSTEM LOCATION : NAME SITE- SYSTEM CONTACT : UNKNOWN- TRAP MANAGER IP : 10.10.10.1



Maintenance diagnostics check ping default gateway pass check primary domain name server pass
MAINTENANCE > DIAGNOSTICS :- CHECK PING DEFAULT GATEWAY : PASS- CHECK PRIMARY DOMAIN NAME SERVER : PASS


Make sure network cable from acess point ap connect to modem eth 0 port 1
- MAKE SURE NETWORK CABLE FROM ACESS POINT ( AP ) , CONNECT TO MODEM ETH 0 (PORT 1)

Eth 0 (Port 1)


ad