Voip talkback speaker programming
This presentation is the property of its rightful owner.
Sponsored Links
1 / 26

VoIP Talkback Speaker Programming PowerPoint PPT Presentation


  • 52 Views
  • Uploaded on
  • Presentation posted in: General

VoIP Talkback Speaker Programming. The summary page allows you to see a brief description of important information currently programmed into the VIP unit. “Name” . The MAC Number is a unique hardware ID for each unit. The Mac Number can also be found on a label on the unit. “Device Type”.

Download Presentation

VoIP Talkback Speaker Programming

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Voip talkback speaker programming

VoIP Talkback Speaker Programming


Voip talkback speaker programming

The summary page allows you to see a brief description of important information currently programmed into the VIP unit.


Voip talkback speaker programming

“Name”


Voip talkback speaker programming

The MAC Number is a unique hardware ID for each unit. The Mac Number can also be found on a label on the unit.


Device type

“Device Type”


How may channels the device has

How may channels the device has.


And the firmware version that the unit left the factory with and what it is currently

And the firmware version that the unit left the factory with and what it is currently.


The properties tab allows you to enter a unique name for the device

The “Properties” tab allows you to enter a unique name for the device.


Voip talkback speaker programming

The “Log Level” is used to determine the complexity of the Syslog information that the unit will send. Level “1” is used for typical call accounting.


Voip talkback speaker programming

Enter the time zone the unit is located in so that the unit can automatically adjust offset from GMT.


Vip units can use dhcp but a static ip address is preferred

VIP units can use DHCP but a Static IP Address is preferred.


Next enter the subnet mask for the lan on which the devise resides

Next enter the Subnet Mask for the LAN on which the devise resides.


Enter the ip address of the gateway connecting the lan to other networks

Enter the IP address of the Gateway connecting the LAN to other networks


Vip devices can automatically send syslog data to a syslog server

VIP devices can automatically send Syslog data to a Syslog server.


Enter the dial code which will be used to access the unit or channel

Enter the Dial Code which will be used to access the unit or channel.


Voip talkback speaker programming

Auto Destination is the Dial Code of another unit or channel to which the input of this channel is mapped.


Enter the cid name and number as they should appear on a caller id display

Enter the CID Name and Number as they should appear on a Caller ID display.


Currently the vip units only support the g 711 codec this codec supports 8khz of bandwidth

Currently the VIP units only support the G.711 Codec. This Codec supports 8Khz of bandwidth.


Voip talkback speaker programming

If you have an Auto Destination set up and the called party does not answer or is busy you can forward the call to another party.


Enter the number of rings before you forward the call

Enter the number of rings before you forward the call.


You can set gain or attenuation for the audio input of each channel

You can set gain or attenuation for the audio input of each channel.


You can also set gain or attenuation for the audio output of each channel

You can also set gain or attenuation for the audio output of each channel.


Input function is used to activate the contact closure input

Input Function is used to activate the contact closure input.


Any audio output can be part of any or all audio groups

Any audio output can be part of any or all audio groups.


Select communications update changed devices to set the information to the vip unit

Select Communications/Update Changed Devices to set the information to the VIP unit.


Voip talkback speaker programming

  • The VIP unit is now programmed and ready for service.


  • Login