1 / 10

nSQ P’s + design implications

nSQ P’s + design implications. D. Giugni / INFN Milano. PP0 Mapping. Focusing on C side – as it is now-. All positions 3 & 4 on OSP- Bm and OSP- Tp are loaded with B-bundles The rest is loaded with D-Bundles. Note that: L1 and D2 go all to the ISP

temima
Download Presentation

nSQ P’s + design implications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. nSQP’s + design implications D. Giugni / INFN Milano 2011-08-18 nSQP's meeting

  2. PP0 Mapping 2011-08-18 nSQP's meeting

  3. Focusing on C side – as it is now- • All positions 3 & 4 on OSP-Bm and OSP-Tp are loaded with B-bundles • The rest is loaded with D-Bundles. • Note that: • L1 and D2 go all to the ISP • BL (L0) go all to pos 3 and 4 in OSP-Bm and OSP-Tp • L2, D1, D3 map to the other location In some cases Pos 3 &4 are loaded with Disk module. Not all pos 3 and 4 have BL modules but they have always B-bundles 2011-08-18 nSQP's meeting

  4. Focusing on C side – as it is now- • The two locations of the Optoboxes preserves the US/USA symmetry required to route the services to the correct PP2. 2011-08-18 nSQP's meeting

  5. Focusing on C side – as it is now- 2 L1 modules with D-Bundles + adapter 50 L1, D1, D3 modules with D-Bundles 4 Disk modules with B-Bundles 11 BL modules with B-Bundles B-box height 2011-08-18 nSQP's meeting

  6. How the thing change for nSQP + Standard NSQP NSQP + L1 and D2 had D-Bundles L1 and D2 Now have B-Bundles L2 and D1 and D3 keep D-Bundles L2 and D1 and D3 had D-Bundles BL and some D keep B-Bundles BL and some D had B-Bundles 2011-08-18 nSQP's meeting

  7. Changes at the OptoBoxes place • The D Boxes stuck is replaced by a B-Box • One of the D box is moved “somewhere else” • Boxes populated like this.. 17 L1 and D2 modules with D-Bundles + adapter 12 L1 and D2 modules with D-Bundles + adapter 13 L1, D2 modules with B-Bundles 4 Disk modules with B-Bundles 10 L1, D2 modules with B-Bundles 11 BL modules with B-Bundles 2011-08-18 nSQP's meeting

  8. Candidates places for the new location New location for the D-OptoBoxes 2011-08-18 nSQP's meeting

  9. Why it can fit... • Single D- Optobox • 40mm height only!!! • Very few services 2011-08-18 nSQP's meeting

  10. In conclusion... • There should be no problem to load B-Bundles in the ISP. Preliminary evaluations are positive! • No design changes are required to the optoboard or optobox hardware. • The available space for the new D-OptoBox can be checked on the 3D scan... but • even if they fit. Is this enough to make a decision without checking in situ? • Still we do not know whether ATLAS will be opened for the next shut down (Dec 2011). It looks anyway too late for us. • In case we decide to go with the nSQP +, then we better make sure to have a solution for the new D-optoboxes. 2011-08-18 nSQP's meeting

More Related