1 / 43

Humanoid Robot Head: May 09-11

Humanoid Robot Head: May 09-11. Team: Dan Potratz Cody Genkinger Tim Meer Jason Pollard Andrew Taylor Client/Advisor: Alex Stoytchev. Planning and System Design. Problem/Need Statement Concepts & Renderings Requirements User Interface Market Survey Risks Schedule Work Breakdown

tekla
Download Presentation

Humanoid Robot Head: May 09-11

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Humanoid Robot Head: May 09-11 Team: Dan Potratz Cody Genkinger Tim Meer Jason Pollard Andrew Taylor Client/Advisor: Alex Stoytchev

  2. Planning and System Design • Problem/Need Statement • Concepts & Renderings • Requirements • User Interface • Market Survey • Risks • Schedule • Work Breakdown • Deliverables

  3. Problem/Need • Problem – At the beginning of the project there was a robotic frame with two mobile robotic arms, but a static shell for the head. • Need – The head needs to be capable of showing human-like facial emotions and movements. • Smile, frown, frustration, etc; • Tilt and pan the head, eyes.

  4. Concept Renderings Provided by Isaak Moody

  5. CAD Renderings

  6. System Requirements • F Req#001 – The head shall move front to back within a 90° arc of motion with a velocity that will be equivalent to 90° per second • F Req#002 – The head shall move left to right within a 90° arc of motion with a velocity that will be equivalent to 90° per second. • F Req#003 – Mouth motions shall be handled by two servos, with a 180 degree arc of motion. • F Req#004 – Eyebrows shall be handled by a single servo, with a 180 degree arc of motion. • F Req#005 – A camera shall be implemented within the head or body to provide visual feedback for processing by the operator. • F Req#006 – The eyes shall be able to move on two axes, with a 30 degree arc in each direction.

  7. System Requirements • NF Req#001 – The head shall look clean and nonthreatening, while retaining human-like attributes. • NF Req#002 – API shall be done within C#. Interfaces will be done in C#. • NF Req#003 – Movement of the head shall be smooth and well transitioned. • NF Req#004 – Motors shall be quiet and not distracting. • NF Req#005 – API shall follow format of existing arm API. • NF Req#006 – The microcontroller board shall be connected to our PC via serial or USB. • NF Req#007 – Servo wiring shall be twisted pair to maintain low noise emission.

  8. User Interface Specification: Overview • User-directed scripting for robot animations. • Record and playback scripts • Manually adjust each facial and neck part. • Adjust hardware related options.

  9. User Interface Specification: Goals • To create animations for head • To create a clean, easy to understand interface • To create a stable interface with: • Proper error reporting • Feedback for the user • Crash acknowledgement

  10. Risks • Technical: • Servo controller/motor malfunction. • Difficulties integrating serial interface. • Financial: • Parts may exceed small budget. • Loss/denied funding for project/parts. • Schedule: • Shipping delays • Course work delays project tasks • Customer Acceptance • Not pleased with result/design and documentation • Solution might exceed budget

  11. Schedule

  12. Work Breakdown

  13. Market Survey • Specific to the design of our head, there are few similar projects. • MIT • Mobile/Dexterous/Social “MDS” Nexi • Leonardo • Kismet • Philips Research • iCat • University of Hertfordshire • KASPAR

  14. Deliverables

  15. System Design • Functional Decomposition • Specifications • Testing • Prototyping • Documents

  16. Functional Decomposition

  17. Hardware Specification: Neck – Pitch & Pan • Two servos • 0-180º < 1 second • Two degrees of freedom • Fits inside space provided on the chassis • Supports up to 4kg • Price: $299.88

  18. Hardware Specification: Neck – Rotating Servomotor • Operating Voltage: 4.8-6.0 Volts • Operating Speed (6.0V): 0.16sec/60° at no load • Stall Torque (6.0V): 56.93 oz/in. (4.1kg.cm) • Current Drain (6.0V): 8.8mA/idle and 180mA no load operating • Dead Band Width: 8usec • Motor Type: 3 Pole Ferrite • Bearing Type: Dual Ball Bearing • Gear Type: Nylon • Weight: 1.6oz (45.5g)) • Price: $15.00

  19. Hardware Specification: Neck – Tilting Servomotor • Operating Voltage Range: 4.8-6.0 Volts • Operating Speed (6.0V): 0.15 sec/60° at no load • Stall Torque (6.0V): 333oz/in. (24kg.cm) • IdleCurrent Drain (6.0V): 3mA at stop • Current Drain (6.0V): 240mA/idle and 3.0 amps at lock/stall • Dead Band Width: 2usec • Motor Type: Coreless Carbon Brush • Bearing Type: Dual Ball Bearing MR106 • Gear Type: Titanium Gears • Dimensions: 40 x 20 x 37mm • Weight: 2.29oz (65g) • Price: $115.00

  20. Hardware Specification: Eye – Tilting Servomotor • Operating Voltage Range: 4.8V to 6.0V • Operating Speed (6.0V): 0.11sec / 60 deg • Stall Torque (6.0V): 7.4kg / 112oz • Bearing Type: Dual Ball Bearing • Gear Type: Metal • Dimensions: 42.0 x 21.5 x 22 • Weight: 32.0g / 1.12oz • Price: $20.00

  21. Hardware Specification: Face – Servomotors • Operating Voltage: 4.8-6.0 Volts • Operating Speed (6.0V): 0.09sec/60° at no load • Stall Torque (6.0V): 23.5 oz/in. (1.7kg.cm) • Motor Type: 3 Pole Ferrite • Bearing Type: Top Ball Bearing • Gear Type: All Nylon Gears • Dimensions: 21.8 x 11 x 19.8mm • Weight: .27oz. (7.8g) • Price: $14.00 each

  22. Hardware Specification: Head – Microcontroller • Max packet size: 59 bytes • Max control rate: 15 instructions / second • 74% available bandwidth used worst case • 1 to 8 servos per board with 8-bit resolution • <1° of servo position precision resolution • Servo port can be reconfigured for digital output to drive on/off devices.   • Dimensions: 1.4 in X 1.7 in  • Price: $80.00

  23. Hardware Specification: Head – Cameras • Video capture: • Up to 640 x 480 pixels (VGA CCD) • Still image capture: • Up to 1280 x 960 pixels, 1.3 megapixels • Frame rate: • Up to 30 frames per second • Price: $50.00

  24. Hardware Specification: Testing • Servos • Function Generator • Oscilloscope • Bench-Top DC Power Supply • Microcontroller Board • Oscilloscope • Computer with serial connection • HyperTerminal Communication Software • Bench-Top DC Power Supply • Power Supply • Bench-Top Multimeter • Bench-Top DC Power Supply

  25. User Interface

  26. Software Specification: Overview • Software tools to allow for interaction with robotic head • RS-232 Instructions • Broad library • Easy to develop scripts • Implementation • Written in C#

  27. Software Specification: Goals • Broad functions that allow for full movement control • Each servo is controlled and receives feedback from microcontroller. • Descriptive functions • Anticipate future changes • Easy to read and use • Command hierarchy • Reduce redundant code • Stable functions • Easy to create new functions.

  28. Software Specification: Library • Robot Head class • Provides functions for controlling each servo (face, eyes, neck) • Graphical User Interface • Allow script building • Listbox – easy to manage and build scripts • Building facial positions (eyebrows and mouth) • Interface with controller • Allow for direct control of head • Mapping buttons to face emotions

  29. Software Specification: Testing

  30. Software Specification: Testing • Unit Testing: • Test each software component. • Ensure each component works to design. • Software System Testing: • Manual test using HyperTerminal • Ensure system works to design. • User Validation • Ensures design overall correctness.

  31. Simulation & Prototyping • Simulations run as head was constructed • Several prototype versions • Plastic pieces not built to spec • Client’s desire to change final details

  32. Test Results • Head can operated for 4+ hours • No program crashing in 4+ hours of continuous use • No overheating during 4+ hours • Some jitter still present in the eye tray • When head reaches outer bounds, servos start to rubberband

  33. Electrical CAD: Connections

  34. Mechanical CAD: Helmet

  35. Implementation • Final Builds • Complications & Conclusions • Future Work

  36. Robot Head: Final Build CAD

  37. Robot Head: Final Build CAD

  38. Robot Head: Final Build CAD

  39. Robot Head: Final Build CAD

  40. Complications • Servos • Overheating • Stalling out • Jumping gears • Plastic • Not printed to spec • Software • Cross-communication between microcontrollers • Communication blocking during transmission to serial board

  41. Future Work • Cameras • Microphones

  42. Demonstration

  43. Questions

More Related