1 / 41

Creating a New Part

tauret
Download Presentation

Creating a New Part

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


    1. Ken Youssefi Mechanical Engineering Dept., SJSU 1 Creating a New Part

    2. Ken Youssefi Mechanical Engineering Dept., SJSU 2

    3. Ken Youssefi Mechanical Engineering Dept., SJSU 3 Default Toolbar

    4. Ken Youssefi Mechanical Engineering Dept., SJSU 4 Model Display

    5. Ken Youssefi Mechanical Engineering Dept., SJSU 5 Pro/E Mouse Functions

    6. Ken Youssefi Mechanical Engineering Dept., SJSU 6 Default Datum Planes in Pro/E Three Standards Principal Orthographic Planes

    7. Ken Youssefi Mechanical Engineering Dept., SJSU 7 Creating Solids

    8. Ken Youssefi Mechanical Engineering Dept., SJSU 8 Creating Solids

    9. Ken Youssefi Mechanical Engineering Dept., SJSU 9 Edit Toolbar

    10. Ken Youssefi Mechanical Engineering Dept., SJSU 10 Implicit Constraints in Sketcher

    11. Ken Youssefi Mechanical Engineering Dept., SJSU 11

    12. Ken Youssefi Mechanical Engineering Dept., SJSU 12 Setting Sketch Orientation

    13. Ken Youssefi Mechanical Engineering Dept., SJSU 13 Setting Sketch Orientation - Example

    14. Ken Youssefi Mechanical Engineering Dept., SJSU 14 Sketcher

    15. Ken Youssefi Mechanical Engineering Dept., SJSU 15 The Sketcher Toolbar

    16. Ken Youssefi Mechanical Engineering Dept., SJSU 16 Sketcher Toolbar Flyout Buttons

    17. Ken Youssefi Mechanical Engineering Dept., SJSU 17 Weak vs. Strong Dimensions

    18. Ken Youssefi Mechanical Engineering Dept., SJSU 18 Over and Under Constrained Sketch

    19. Ken Youssefi Mechanical Engineering Dept., SJSU 19 Extrude Command in Pro/E

    20. Ken Youssefi Mechanical Engineering Dept., SJSU 20 Extrude Command in Pro/E

    21. Ken Youssefi Mechanical Engineering Dept., SJSU 21 Creating an Extruded Cut

    22. Ken Youssefi Mechanical Engineering Dept., SJSU 22 Creating an Extruded Cut

    23. Ken Youssefi Mechanical Engineering Dept., SJSU 23 Creating a Hole (placed feature)

    24. Ken Youssefi Mechanical Engineering Dept., SJSU 24 Creating a Hole (placed feature)

    25. Ken Youssefi Mechanical Engineering Dept., SJSU 25 Chamfer and Fillet (Round)

    26. Ken Youssefi Mechanical Engineering Dept., SJSU 26 Creating a Revolved Feature

    27. Ken Youssefi Mechanical Engineering Dept., SJSU 27 Creating a Sweep Feature (Protrusion)

    28. Ken Youssefi Mechanical Engineering Dept., SJSU 28 Creating a Sweep Feature (Cut)

    29. Ken Youssefi Mechanical Engineering Dept., SJSU 29 Creating a Sweep Feature (Cut)

    30. Ken Youssefi Mechanical Engineering Dept., SJSU 30 Creating a Sweep Feature (Cut)

    31. Ken Youssefi Mechanical Engineering Dept., SJSU 31 Creating a Swept Blend Feature

    32. Ken Youssefi Mechanical Engineering Dept., SJSU 32

    33. Ken Youssefi Mechanical Engineering Dept., SJSU 33 Creating a Swept Blend Feature - Examples

    34. Ken Youssefi Mechanical Engineering Dept., SJSU 34 Creating a Swept Blend Feature - Examples

    35. Ken Youssefi Mechanical Engineering Dept., SJSU 35 Creating a Swept Blend Feature - Examples

    36. Ken Youssefi Mechanical Engineering Dept., SJSU 36

    37. Ken Youssefi Mechanical Engineering Dept., SJSU 37

    38. Ken Youssefi Mechanical Engineering Dept., SJSU 38 Creating a Variable-Section Swept Feature

    39. Ken Youssefi Mechanical Engineering Dept., SJSU 39 Creating a Datum Plane Tangent to a Curve at a Point

    40. Ken Youssefi Mechanical Engineering Dept., SJSU 40 Creating a Datum Plane Tangent to a Curve at a Point

    41. Ken Youssefi Mechanical Engineering Dept., SJSU 41

More Related