1 / 18

 Introduction with pictures  Prototype design and construction

CALICE - ECAL silicon-tungsten.  Introduction with pictures  Prototype design and construction  R&D on the design of the full scale calorimeter. e + e –  W + W – at s = 800 GeV. After reconstruction. e + e –  W + W – at s = 800 GeV. Classified as charg ed pads.

tamarr
Download Presentation

 Introduction with pictures  Prototype design and construction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CALICE - ECALsilicon-tungsten Introduction with pictures Prototype design and construction R&D on the design of the full scale calorimeter

  2. e+e– W+W–at s = 800 GeV After reconstruction e+e– W+W–at s = 800 GeV Classified as charged pads Simulation,visualisation MOKKA, FANAL Classified as photon’s pads Just to recall the reason of the choice

  3. Electron ID in jets ALL VALUES in % Photon ID in jets ZH at 500 GeV Z in  , H in jets Jets at 91 GeV Hadron MISID Electron ID Photon energy GeV Particle momentum GeV 250 GeV ± → • → and • →  ID Jet mass

  4. Looking along the charged track in the first 4 X0 charged pion Photons from o Looking along the ch. track in 5-12 X0 Tau decays ID is essential for ID and polarisation measurement (250 GeV)→

  5. CALICE - ECALsilicon-tungsten Introduction with pictures Prototype design and construction R&D on the design of the full scale calorimeter

  6. Prototypes overview Global view of the test beam setup VME/PCI/… ECAL general view HCAL 2nd structure (2×1.4mm of W plates) 3rd structure (3×1.4mm of W plates) 180 mm BEAM ECAL Beam monitoring Movable table VFE 370 mm 1st structure (1.4mm of W plates) 370 mm Detector slab Silicon wafer

  7. Mould for alveolus structure 1.4 Structure 5 alveolus :(10 layers) Detector slab (here it is just a type H structure) Alveolus structures Design and construction of a mould with all metallic pieces for the 3 different structures

  8. Front End electronics Shielding Transverseview PCB Silicon wafer (0.525 mm) PCB (8-10 layers) ( 2 - 2.5 mm) Al. Shielding Silicon wafer (Cfi / W) structuretype H 7.3 mm Composite structure(0.15 mm / layer) Tungsten (1.4 mm, 2×1.4 or 3×1.4 mm) Detector slab

  9. 2 2 2 2 2 62mm 10mm 6 2 10mm Diode footprint 62mm 1 wafer Diode bias Sig. readout Diode pinout Detector schematic description Amorphous silicon deposition Protection Capacitance(AC coupling) Aluminium sheet PCB Wafers The aluminium sheet is the ground

  10. 4” high resistivity wafers • 525 microns thick – 5Kcm • tile side: 62.0 + 0.0 • - 0.1 mm • scribe line: 100 m • scribe safety zone: 200 m • guard ring width: cca 750 m • (cca 1.5 * wafer thickness) ECAL prototype silicon wafer description Dead zone width is only 1mm First test production with 25 wafers 24 good (<10nA leakage) Wafer book keeping information

  11. CHIP FLC-PH1 developed at LAL Electronic readout Front End electronics • 18 charge inputs • 18 voltage outputs • 1 MUX voltage output low noise 1.6 nv/Hz good linearity non-linearity≲ 1% large dynamic 650 mip Custom-built VME readout board(UK) First prototype April 2003 Board based on PCI or even USB2.0 is also under study

  12. Responsibilities ITEMS LABORATORIES - Tungsten production and testITEP, IHEP, LAL - Mechanics assembly (Cfi,…)LLR, LPC - Silicon wafers productionMSU (Moscow), IPASCR (Prague) - Amorphous silicon deposition,…PICM, LLR - VFE design and productionLAL, (LPC for large scale R&D) - ADC’s and DAQIC, UCL, Manchester, Cambridge , Birmingham - Detector slab assembly LLR - Cosmics test on assembled deviceLLR

  13. Meetings and Agenda 21th January 2003 ,ORSAY(LAL) meeting on ECAL prototype - Technical meeting on construction , test, beam def., … End February 2003 ,PALAISEAU(LLR) meeting onDigital HCAL prototype - responsibilities - funding - repartition of works The goal is : ECAL ready for a first debugging test beam at theSummer-Fall 2004

  14. CALICE - ECALsilicon-tungsten Introduction with pictures Prototype design and construction R&D on the design of the full scale calorimeter

  15. Other R&D In progress at LLR Cooling of the readout Collaboration is welcome For the electronic readout inside the detector and if needed by the dissipation of the VFE - Study with SPICE and SAMCEF - Small prototype to validate the simulation - First response for Amsterdam 2003 Impact of e.m. shower on the VFE Collaboration is welcome - First study with GEANT4 - Possibility to use the beam H4 (CERN) with 200 GeV electron in 2003 - First response at the end of 2003 Under preparation By the LAL group

  16.  Globalsimulation of the device withSPICE(static as well as dynamic simulation)  Localsimulation by finite elements usingSAMCEF(using the condition at the limit obtainsby SPICE)  Correlationandvalidationof the simulations by a small prototype  Simulation of a“large scale"detector slab and its environment. Cooling channel Heat points (VFE chip) Thermal sensors Externalconnections In progress at LLR Structure type H PCB 1mm thick(with wafers) Radiator aluminium plate

  17. T1 T2 T3 Degree K Point numbers R&D – 1st results SPICE/SAMCEF SPICE V = Temperature I =Calor flux SAMCEF T8 T7 T6 Temperature distribution : T5 T4 T1 T3 T2 T5 Results : T6 Conditions at the limits T4 T7 T8 T3 m m T2 0 8 1 8 0 m m T1

  18. Conclusion The prototype design is almost fixed The prototype construction will begin soon Ready for a first test beam in 2004 The R&D on the large scale detector are in progress In both case, collaboration with US labs. is welcomed

More Related