1 / 25

Roadmap Chapters: Proper Time Resolution and B →p p

Roadmap Chapters: Proper Time Resolution and B →p p. Laurence Carson γ with Loops Meeting 19.02.09. Overview. I will review studies described in two public LHCb notes. Each is the basis for a chapter in the roadmap.

tamah
Download Presentation

Roadmap Chapters: Proper Time Resolution and B →p p

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Roadmap Chapters: Proper Time Resolution and B→p p Laurence Carson γwith Loops Meeting 19.02.09

  2. Overview • I will review studies described in two public LHCb notes. • Each is the basis for a chapter in the roadmap. • “Measurement of the Proper Time Resolution for B→h+h’- Channels from Data”, author L. Carson (LHCb-2008-060) • “Sensitivity of LHCb to Observe Bd→p p”, authors L. Carson and E. Rodrigues (LHCb-2009-006, in preparation)

  3. Proper Time Studies: Status • Work on this was completed last year; public note LHCb-2008-060 released in November. • Roadmap chapter: First draft exists; revised draft will be circulated in the next draft of the roadmap.

  4. Motivation for Proper Time Study • Time-dependent CP asymmetries in Bd→π+π- and Bs→K+K- together give sensitivity to γ. • Fast Bs oscillations mean that the reconstructed proper time (τrec) distribution for Bs→K+K- is dependent on detector proper time resolution. • So an incorrect proper time resolution model may bias the extraction of γ. • Hence a method is needed which extracts the resolution model for Bs→K+K- from data. • Method in LHCb-2007-059 uses Bs→K-π+ as a control channel. This works because Bs→K-π+ is flavour-specific and so cannot have time-dependent CPV.

  5. Validation of Resolution Model • First step: produce a model that accurately describes the proper time residual (Δτ≡ τrec- τtrue) distributions for B→hh channels. • Model used: Secondary Gaussian (width Sfixed = 10ps, mean 0) which describes the wide tails in the distribution. Main Gaussian (width S, mean M) which describes the distribution for almost all of the events. • Parameters M and S are calculated event-by-event, using M ≡ GM. στrec and S ≡ GS.στrec (στrec is per-event error). Goal is to find the values of GS, GM and F2 that allow R(Δτ) to accurately describe the Δτ distribution in each B→hh channel.

  6. Validation of Resolution Model • The four channels considered are Bd→π+π-, Bs→K+K-, Bs→K-π+and Bd→K+π-. • The four Δτdistributions were all found to be well described by R(Δτ), and the values of GS, GM and F2 are compatible across the distributions.

  7. Model Extraction on Data • Toy study (using flavour-tagged τrecdistributions created in RooFit) was done to estimate the sensitivity to GM, GS and F2 from data. • Distribution for Bs→K-π+ made using R(Δτ) as resolution model. Other parameters such as ω, τBsetc. assumed known from other studies. • Distributions for main specific background (Bd→K+π-) and b-inclusive background made with Gaussian of 40fs fixed width as resolution model. This is because these backgrounds aren’t sensitive to the resolution model.

  8. Model Extraction on Data • Five parameters are fitted for: GM, GS, F2, B/Sspecific, and B/Sb-inclusive. • 300 toy jobs were ran, with each dataset having 6,000 signal events, corresponding to 2fb-1 of data. • The oscillations are just visible above the “noise” coming from mistag, proper time resolution and background. toy datapoints PDF used to make toy data

  9. Results • Input values are recovered without biases (see next slide). • Pull widths are all compatible with 1. • A few % of fits fail to converge correctly. GS GM

  10. Results • The input values are correctly recovered within the errors. • The sensitivities are such that from 2fb-1 onwards the fit can start to give non-trivial input into the analysis of Bs→K+K- , and hence the γ measurement.

  11. Conclusions on Proper Time • A model has been developed which accurately describes the proper time residuals for B→hh. • The parameters of this model can be extracted on data via a fit to the flavour-tagged τrecdistribution for Bs→K-π+. • Once 2fb-1 of data has been collected, the fit to the model parameters can provide useful input into the γ measurement using Bd→π+π- and Bs→K+K-.

  12. B→p p Study: Status • Work completed recently; first draft of public note LHCb-2009-006 is nearing completion. Should be circulated around the WG soon. • Roadmap chapter: Included in the currently circulating draft of the roadmap.

  13. Motivation for B→p p • Despite searches by B-factories, no charmless two-body baryonic B-decay has been observed. • Particular case of Bd→p p ideal for LHCb as it differs from standard B→hh modes only in PID. Current best upper limit for its branching ratio (BR) is 1.1*10-7 (from Belle). • Theoretical predictions for BRs of such decays in the SM is challenging; results vary in order of magnitude depending on model used (e.g QCD sum rule vs. diquark model). • Most of the theoretical predictions for Bd→p p are excluded by experiment; lowest prediction is 1.1*10-7. Not a copy-paste error: it really is the same value as the experimental limit!

  14. Backgrounds to B→p p • The backgrounds considered are: • L0-passed minimum bias • b-inclusive • B→hhh specific backgrounds • B→hh specific backgrounds • As selection already exists for the “standard” B→hh (where h = π or K) which keeps the B/S for min. bias and b-inclusive low, this was used as the starting point for the Bd→p p selection. • After studying the few background events which survived the standard selection, a few extra cuts were added to lower the B/S further:

  15. Selection for Bd→p p • Added PID cuts: DLL(p-π)>5 and DLL(p-K)>0. • Very effective against both inclusive bkgs (few h in typical event are true p), and specific bkgs (most of B→hh and B→hhh don’t involve p). Bd→ π+π-π0 DLL(p- π) Signal DLL(p- π) • Added track quality cut: track χ2/ndf < 3. • Reduces the number of ghosts from min. bias and b-inclusive events. b-inclusive ghost track χ2/ndf Signal track χ2/ndf

  16. Specific Bkgs Before PID • Plots show expected mass distributions after 2fb-1, applying full selection except the PID cuts. Bd→ p p Bd→ p p Bd→ K+π- Bd→ π+π-π0 Bs→ K+ K- Λb→ p K- Bd→ p p Bd→ p p Bu→ π+π-π+ Bu→ K+K-K+ Bu→ π+π-K+ Bd→ Ks π-π+ Bu→ ppK+ Bu→ π+K-K+ Bu→ ppπ+

  17. Specific Bkgs After PID • Thankfully we have two RICHes!  Recall: DLL(p-π)>5 and DLL(p-K)>0 Bd→ p p Λb→ p K- Bs→ K+ K- Bu→ ppK+ Bd→ K+π- Bu→ ppπ+ Bd→ π+π-π0

  18. Selection Efficiency • Final step: apply mass window of mBd±50MeV. • The resulting selection has an efficiency of 9.8% on signal. Assuming a BR of 1.1*10-7, this gives 1882 events in 2fb-1. • No background events of any type survive the selection, allowing upper limits on the yield to be set using the Feldman-Cousins method. • The B/S for min. bias is clearly saturated by lack of available simulated MB events. • From now on we assume that no MB will pass the selection.

  19. Signal Significance • This can be plotted against lumi for different BR values. • If B.R. = 1.1*10-7: • The total B/S (ignoring min. bias) is <2.24 at 90% confidence level. • 5σ observation is possible with only 0.09fb-1, i.e. in the 2009/10 running period! • Even if the true B.R. is 5 times lower, an observation can be made with 2.0fb-1. 1.1*10-7 8*10-8 4*10-8 2*10-8 Signal significance = S/sqrt(S+B)

  20. Trigger Issues: Mass Window • So far trigger has been ignored, and pp daughter hypothesis used. Trigger uses π+π-hypothesis, shifting mass peak far below mBd. • A mBd±600MeV window loses ~13% of signal events. Could live with this. • The [4GeV,6GeV] window of the Topological Trigger would be even better. • BUT the roadmap proposes a mass window of [5.0GeV, 5.8GeV]. • This fails to include the peak for Bd→ p p! Bd→ p p • The trigger mass window needs to be widened to include this discovery channel. • A wider window also improves sideband knowledge. End of roadmap window Bs→ p p End of 600MeV window mBd

  21. Other Similar Rare Decays • Other unobserved decays suitable for LHCb include Bs→p p and Bd→ ΛΛ. • Former comes “for free” with the search for Bd→p p. • Latter will be more challenging due to the need to reconstruct two hyperons. Also invariant mass will be lower than Bd→p p. • Also still to be observed are Bs→π+π- and Bd→K+K-. • Their BRs can help constrain U-spin breaking effects; important in extracting γfrom Bd→π+π- and Bs→K+K-. • Selection should be kept the same as for main B→hh modes to help control systematics. • BR upper limits in 2008 PDG are 5.9*10-5 (Bs→p p), 3.2*10-7 (Bd→ ΛΛ), 1.7*10-6 (Bs→π+π) and 4.1*10-7 (Bd→K+K-).

  22. Conclusions on Bd→p p • Offline selection has been developed. • ηsel= 9.8% • For high signal BR: • Total B/S < 2.24 at 90% C.L • 2fb-1 yield≈1900 events • 5σ observation with 0.09fb-1

  23. Backups

  24. F2 Fitted Values • For 2fb-1, the value of F2 is often fitted to 0 as the sensitivity is comparable to its magnitude. But for 10fb-1 the sensitivity is better, and a Gaussian is obtained for the fitted values distribution. • In any case this is not a problem as the fit result is still correct within its error, and the pulls are okay. 2fb-1 10fb-1

  25. Yield Calculation Details • The following does not take the trigger efficiency into account. • The Feldman-Cousins method gives 2.44 as 90% upper limit when 0 events are selected; ηsel<2.44/(# of events in bkg sample). • For the signal and specific bkgs, the yield in 2fb-1 is given by From previous slide Events with both daughters in LHCb acceptance Since have both b and bbar in an event Hadronisation probability Number of bbbar in 2fb-1 Branching ratio • For stripped b-inclusive the yield in 2fb-1 is Probability for bb inclusive event to pass at least one of the preselections in the stripping Scaling mass window from 600MeV to 50MeV • The L0-yes min. bias yield is calculated by assuming that the output rate of L0 is 1MHz.

More Related