1 / 13

Robotic Systems

Robotic Systems. Autonomous Mobility Applique System Technical Demonstration 1. Don Nimblett Business Development.

sydnee
Download Presentation

Robotic Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Robotic Systems Autonomous Mobility Applique SystemTechnical Demonstration 1 Don Nimblett Business Development Reference herein to any specific commercial company, product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or the Department of the Army (DoA). The opinions of the authors expressed herein do not necessarily state or reflect those of the United States Government or the DoA, and shall not be used for advertising or product endorsement purposes. DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. OPSEC # 24099

  2. Overview • AMAS Program Objectives • AMAS Technical Objectives • AMAS Vehicles • Technical Demonstration 1 Scope • BWASK Physical Architecture • BWASK Functionality • Technical Demonstration 1 Testing • Technical Demonstration 1 Results • AMAS Next Phase

  3. Develop Standardized Kits with a high degree of commonality across vehicle types Utilize and provide inputs into the RS-JPO Interoperability Profile (IOP) Develop and deliver a Government Owned Software Library (MRSL) using CMMI Level 3 AMAS Program Objectives Mission Payload Kit Autonomy Kit By-Wire/Active Safety Kit • Develop Training and Maintenance Documents for Soldier/ Marine Operation of System (Eventual MOS) • GPR for all Deliverables Leading to Increased Competition Steering Actuation Driver Warning/ Driver Assist Sensors Autonomy Kit Sensors Mission Specific Sensors Overall Vehicle Controller Brake Actuation Autonomy Computer J1939 Mission Specific Software (Hardware if Necessary) IOP ESC Commander OCI Data Logger Radio (RNIK) Transmission Mission Specific Actuation Platform Specific Dashboard OCI Platform Agnostic Platform Agnostic

  4. AMAS Technical Objectives • Purpose: • To provide today’s military vehicles with an optionally manned capability to increase safety and provide the Warfighter with additional flexibility in how assets and personnel are deployed under a variety of missions and conditions. AMAS will be integrated onto military vehicles by developing, integrating and demonstrating: • A vehicle kit to control the physical actuation of a vehicle called the By-Wire/Active Safety kit. This kit is unique to each type of vehicle platform, based on differing hardware requirements. • A common, appliqué Autonomy kit that will contain the primary intelligence and autonomous decision making. This Autonomy kit will be common across all vehicle platforms, designed to function and inter-operate regardless of type of vehicle platform installed on. • Products: • Autonomy Kit: Autonomous Hardware and Sensors • By-Wire Kit: Vehicle specific devices to retrofit current fleet • Common Interfaces and Architecture • Autonomous Testing Methodologies and Procedures • Payoff: • Increased Operational Efficiency and Effectiveness • Improved Situational Awareness • Increased Driver Safety (reduce accidents/rollover avoidance) • Improved Operations in no/limited visibility conditions

  5. AMAS Vehicles Technology Demonstration 1 BWASK Only • M915 • Used in commercial trucking • MTVR • Primary mover for Marines • MATV • Supporting OCP TEC-D Added at Technology Demonstration 2 • PLS • Multiple steering axles • Primary mover for retrograde • FMTV • Well understood dynamics • Workhorse for short missions • HET • Significantly larger with different dynamics profile • Trailer • RG-31 • Additional controls for the mine roller unit

  6. Technical Demonstration 1 Testing • Purpose: Testing the functionality of the By Wire Active Safety Kit. • Importance: BWASK is the foundation that AMAS is built on. Provides the safety critical real time monitoring of robotic functionally of the Autonomy Kit • Dates: 15 - 25 July 2013 • Location: Savannah River Site, South Carolina • Platforms: 2 MTVRs and 2 M915 w/trailer • Loads: 0% or 100% • Testing: Conducted by the Assessment IPT, with stakeholder representation from TARDEC, RS-JPO, CASCOM, USMC, TRANSCOM and CENTCOM • The Demonstration Plan One (DP1), which formed the basis of testing, was developed by cross-walking, line by line, the requirements from the By Wire Active Safety Kit (BWASK) Software Requirement Specification document • The DP1 was developed at TARDEC and each testing vignette was reviewed and approved by the Assessment IPT

  7. BWASK Physical Architecture Dashboard OCI BWASK Processor Logger Navigation DW/DA Camera Forward Radar Rear & Side Radar TRC/ E-Stop

  8. BWASK Functionality Short Range RADAR Camera • Cross Traffic Warning/Assist • Backup Warning/Assist • Blind Spot Monitor • Lane Change Assist LRR SRR SRR SRR SRR Long Range RADAR • Forward Collision Warning • Adaptive Cruise Control • Collision Mitigation Brake System • Pedestrian Detection Forward Camera Manual Driver System operates as if AMAS were not installed. System is powered for data logging purposes • Lane Departure Warning • Lane Keeping Assist • Pedestrian Detection

  9. TD-1 Test Coverage and Results • Tested all BWASK Modes: System Off, Manual Driver, Driver Warning, and Driver Assist • All vehicles and systems were available to complete testing • Test and Safety communities were able to gain experience with the systems and test methodologies • Good feedback from stakeholders on slight changes to how the system operates. • Some adjustments were made on the spot, for example Hill Decent Control, and reviewed. • Other functions, like Collision Mitigation Braking and Emergency Braking Assist, will require additional review.

  10. TD1 Test Coverage & Results • System Off and Manual Driver modes showed that the system behaved as if AMAS were not installed • DA/DW functions tested: 16 of 17 • Pedestrian Detection, not tested due to time constraints

  11. AMAS JCTD Remaining Activities Today Oct 13, '13 Nov 24, '13 Jan 5, '14 Feb 16, '14 Mar 30, '14 May 11, '14 Jun 22, '14 Aug 3, '14 TD1 Hardware Installation for Remaining Vehicles8/1/13 - 11/1/13 Software Development8/1/13 - 1/31/14 System Integration/ Verification2/3/14 - 4/21/14 Tech Demo 24/21/14 - 5/16/14 Safety Test5/29/14 - 6/25/14 Op Demo7/7/14 - 8/15/14

  12. Questions?

More Related