1 / 5

SNOOZE AlARM CLOCK WITH LAMP

SNOOZE AlARM CLOCK WITH LAMP. BY MARZANA RAHMAN & NADIA JAHAN. Our project. We created a alarm clock We used an RTC connected to a LDC to display time Buttons were added to set the time and stop the alarm Coded the piezo speaker to play a tune

Download Presentation

SNOOZE AlARM CLOCK WITH LAMP

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. SNOOZE AlARM CLOCK WITH LAMP BY MARZANA RAHMAN & NADIA JAHAN

  2. Our project • We created a alarm clock • We used an RTC connected to a LDC to display time • Buttons were added to set the time and stop the alarm • Coded the piezo speaker to play a tune • We also added a 8X8 LED matrix to display a message • Added a Relay Plug so when the alarm goes off the bad lamp switches on

  3. What went Well • Soldering the RTC together and getting it to display time on the LCD • Wiring the RTC with the LCD and Buttons. • Making of the housing and painting it • Installing a relay in our plug, however we had by mistake soldered the wrong legs to the wire. This was discovered when testing the relay and was fixed straight away

  4. What went bad • Coding for setting the alarm • Soldering the buttons as they were very fiddly • Making the cut out for the housing • We attempted to connect the 8X8 LED matrix together with our main board but had no luck

  5. Further improvement

More Related