1 / 18

A Brief Journey into Parallel Transmit

A Brief Journey into Parallel Transmit. Jason Su. Description. Goal: expose myself to some of the basic techniques of pTx Replicate in-class results Explore some possibilities Learn about spokes design – 3D design Implement “inversion” design, as detailed in class notes.

sorcha
Download Presentation

A Brief Journey into Parallel Transmit

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. A Brief Journey into Parallel Transmit Jason Su

  2. Description • Goal: expose myself to some of the basic techniques of pTx • Replicate in-class results • Explore some possibilities • Learn about spokes design – 3D design • Implement “inversion” design, as detailed in class notes

  3. Small Tip-Angle Inversion Design • Freedoms in design: • Number of spatial points • Number of k-space points • Regularization and smoothing • Traditional design is sometimes too fast for RF coil to keep up

  4. Basic Design • Jinc-weighted spiral design as in HW3 • Resolution = 0.2cm • FOV = 10cm • Gradient amplitude max = 6 G/cm • Gradient slew rate max = 20 G/cm/ms • Desired slice width = 4cm • Pulse length = 18ms for full FOV, 9ms for FOV/2

  5. Spiral Design

  6. Spiral Design – FOV/2

  7. Parallel Transmit System • 4 channels 24cm 16cm

  8. Parallel Transmit Design • Design target profile • Based on full FOVspiral • Cut out sidelobes • Flattened profile • 2x accelerated • This is actually infeasible • 64x64 spatial points, 512 spiral k-space points

  9. Result • Good sidelobe cancellation • Uniformity of mainlobe is poor

  10. Finer K-Space Sampling • We can improve the design by depositing more energy into k-space over the same trajectory • i.e. sample more finely in k-space • The penalty is that we need a better RF coil to keep up with the sampling rate

  11. Finer K-Space Sampling

  12. Side Note: Receive Oversampling • The excited profile is calculated as: Efbf • The spatial resolution of Ef can be as fine as desired • Sample an 80x80 grid: • The profile is quitedifferent. Matchingwith Tx required?

  13. RF Coil Considerations • RF coils have finitebandwidth • With hardest caseof 2048 k-space pts.,how does this affectexcited volume?

  14. Effects of RF Coil • Modeled coil response as that of a windowed sinc • Somewhat arbitrarily: BWhalf the k-space samplingrate = 100KHz

  15. Resulting Profile • Poor cancellation outside main lobe • Main lobe profile is worsened • Sidelobes reappearat edges • Should be able todo better, consider1024-sample

  16. Smoothing w/ Regularization • Try to minimize the high frequency energy • J = ||Eb-M||^2 + μ||Fb||^2, where F is the DFT matrix for high frequencies • Changed to 32x32,512-sample due to memory limitations

  17. Comparison

  18. Conclusion • Here, there is a knee in the RMSE vs. # k-space pts. profile at around 1024 pts., may not be always be the case • RF coil bandwidth greatly affects the quality of the resulting excitation profile • Regularization improves profile, especially out-of-mainlobe uniformity

More Related