1 / 9

How to Configure Networking in KDE Plasma

Imagine youu2019ve just installed a Linux distribution that includes the KDE Plasma desktop. Everything is going great, but then you decide you either want to be able to secure shell (SSH) into that desktop, or you want to be able to share out folders on your network.<br>

soni01
Download Presentation

How to Configure Networking in KDE Plasma

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. How to Configure Networking in KDE Plasma

  2. Why Configure a Static IP Address Imagine you’ve just installed a Linux distribution that includes the KDE Plasma desktop. Everything is going great, but then you decide you either want to be able to secure shell (SSH) into that desktop, or you want to be able to share out folders on your network. Out of that box, that KDE Plasma desktop is going to get its IP address assigned via Dynamic Host Configuration Protocol (DHCP). In other words, the desktop will get a temporary IP address, from a router (configured by your Internet Service Provider - such as AT&T, Comcast, etc.). How long that desktop we have that IP address is up to the ISP (and how they’ve configured the DHCP service on the router). When that DHCP IP address lease expires, your desktop will be given a different address, which means you won’t be able to connect to that desktop (or its shared folders) until you find out the new IP address.

  3. Accessing the KDE Network Manager In order to configure networking in KDE Plasma, you have to open the Network Manager. To do this, follow these steps: 1. Click on the farthest left icon in the system tray to open the Networks popup.

  4. 2. Click the Settings button at the top of the popup. 3. You should now see the Connections window. 4. Prepare to configure.

  5. Configure Networking Configure your network for a static IP address with the following steps: 1. Click Wired connection 1 in the left pane of the Connections window. Get more information visit here : norton com setup with product key

  6. 2. Click the IPv4 tab. 3. From the Method drop-down, select Manual.

  7. 4. Enter the DNS server addresses (optional) in the DNS Servers section. If you add more than one DNS address, separate them with a comma. 5. Click Add. 6. Type the IP address (under Address) and use the Enter key on your keyboard to move to Netmask. Type the netmask address (usually 255.255.255.0) and then tab to Gateway. For the gateway address, type the address of your router. 7. Click Apply. 8. Click OK.

  8. You might think that the newly configured IP address will take effect immediately. It won't. That doesn't happen until you disconnect and reconnect to the network. Fortunately, this is quite simple. Here’s how: 1. Open the Networks popup (as you did to access the Network Manager). 2. Click Disconnect. 3. Click Connect. 4. Click a blank spot on the desktop to dismiss the popup.

  9. THANKS FOR WATCHINg Get more information visit here : norton com setup with product key

More Related