1 / 30

5G Cellular and New Radio

5G Cellular and New Radio. Outline. 2. Is 4G enough? Basic performance measures of cellular mobile networks Part 1: Increasing the bandwidth (5G/6G) Challenges and specifics Future perspective Part 2: 5G/5G+ and New Radio Interface 5G services and requirements NR radio interface

skaggsr
Download Presentation

5G Cellular and New Radio

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 5G Cellular and New Radio

  2. Outline 2 • Is 4G enough? • Basic performance measures of cellular mobile networks • Part 1:Increasing the bandwidth (5G/6G) • Challenges and specifics • Future perspective • Part 2:5G/5G+ and New Radio Interface • 5G services and requirements • NR radio interface • NR propagation • Addressing latency • Addressing reliability

  3. Satisfying growing traffic demands

  4. Is4G enough? 4 • 100Mbpsfor all subscribers in a cell! • Cell radius: ~500m-2km • Density of users:city center – 0.1-0.01humans/m^2 • Apps: email, youtube, browsing etc.

  5. Is4G enough? 5 • Exabyte: 10^18 байт... • The main question: how to get there?

  6. Important performance metrics 6 • Shannon channel capacity: • C=Blog2(1+S), • B – bandwidth • S – signal-to-interference plus noise ratio (SINR) • S=PR/(BN+I) • PR – signal power at the receiver • N – thermal noise (-174dBm/Hz), constant • I – aggregated interference • Signal power at the receiver • PR=PTAd-γ, • PT – emitter power at transmitter • A – constant that depends on antennas/frequency • d – distance between Tx and Rx • γ – ”path loss exponent”depends on environment

  7. What is interference? 7 • Interference of lightInterference in cellular mobile network

  8. How to provide 1Gbps+? 8 • How to increase the rate at the air interface? • C=Blog2[1+PR/(BN+I)]. • More sophisticated lower layer mechanisms (PHY+DL)? • Increasing emitted power? • Decrease thermal noise? • Decrease interference? • Increase bandwidth? • Network mechanisms

  9. How to provide 1Gbps+? 9 • PHY layer mechanisms? No... • FEC, MIMO, ARQ, etc.we are closer than 90% to Shannon • Increase emitted power? No... • We increase the coverage area of a cell decreasing rate • We may increase interference • Decrease thermal noise?No way... • Constant up to 0.6THz (6*1011Hz) • Superconductors atT=293K  • Decrease interference? • Logarithmic increase of C • Increase bandwidth? • Almost linear increase of C • Network mechanisms • Better spatial frequency reuse

  10. Increasing the bandwidth 10 • Shannon rate once again… • C=Blog2[1+PR/(BN+I)]. • Almost linear increase of rate • Why almost? negative effect on noise • Very effective! • Solution 1: buy more licencedfrequenues! • Commercial networks (cellular networks) • Exclusive access • Ability to use higher transmission power, >1mW • High costs and risks!!! • Less than 100-500MHzoverall in a country (less than 3GHz) • LTE: https://en.wikipedia.org/wiki/LTE_frequency_bands

  11. Increasing the bandwidth 11 • Solution 2: use the unlicensed spectrum! • ISM (Industrial, scientific, medical bands) • Extreme interference fromWi-Fi-s…

  12. Increasing the bandwidth 12 • Spectral efficiency • Bits per hertz per second • Characterizes modulation scheme • Quadrature amplitude modulation: • PSK+ASK: S(t)=Acos(ωt+φ),modulatingωand φ • <6GHz 1GHz overall: 10Gbpsonly if~10bits/Hz/s. • Using all available bandwidth below 3GHz we’ll get 10Gbps…

  13. Increasing the bandwidth 13 • Where are cellular systems in the spectrum?

  14. Increasing the bandwidth 14 • Higher frequency, more bandwidth available • 5G: millimeter wave (mmWave) • 28GHz • 60GHz (802.11ad, “new”Wi-Fi) • 72GHz • Positives • Highly directional antennas! • Negatives • Blockage by humans  • Large propagation losses • Realistically up to 100m.

  15. Increasing the bandwidth 15 • B5G, 6G: terahertz (sub-mmWave) • 275-325GHz: 50GHzof bandwidth!!! • IEEE 802.15.3d “100Gbps wireless” • http://www.ieee802.org/15/pub/SG100G.html • Positives • Even more directivity • Huge channel capacity • Negatives • Atmospheric absorption • Blockage by humans • Extreme propagation losses • Realistically up to 10-20m.

  16. 5G and New Radio Interface

  17. 5G/5G+ systems as enablers 17 • Resembles properties of CPS • Moves us closer to tactile Internet concept • Has to be supported by 5G/5G+ mobile cellular systems • At least two of the following are required • High throughput • High reliability • Low latency • Reliable service over inherently unreliable medium

  18. Envisioned 3GPP 5G Services 18 • Enhanced mobile broadband (eMBB) • Phase 1&2 are over, fully by 2020 • Massive machine-time communications (mMTC) • NB-IoT technology • Ultra-reliable low-latency services (URLLC) • Not yet available and no dates announced…

  19. 5G: evolution or revolution? 19 • Prior to 5G: just replacing RAT • 5G/5G+ systems are heterogenous in nature • New Radio (NR) RAT (28,38,72 GHz) • Multi-RAT support: LTE/NR/Wi-Fi, etc. • Advanced features: D2D, relays, femto/micro BSs • SDN/NFV capabilities for control plane • NR is expected to support URLLC service • Potential to delivery up to 10GBps per AP • Potential to upper bound latency • Potential to provide reliability • NR brings a lot of new challenges

  20. Propagation in mmWave band 20 • Highly complex compared to microwaves • Multiple paths • Material dependent • Spatial correlation • Temporal correlation

  21. Path blockage phenomenon 21 • Very small wavelengths (30GHz ~ 1mm) • Cannot penetrate through objects • Cannot “travel” around • Blockage happens at sub-second scales • Models for various environments needed • M. Gapeyenko, A. Samuylov, M. Gerasimenko, D. Moltchanov, S. Singh, M. Akdeniz, E. Aryafar, N. Himayat, S. Andreev, Y. Koucheryavy, "On the Temporal Effects of Mobile Blockers in Urban Millimeter-Wave Cellular Scenarios," IEEE Trans. Veh. Tech., 2017.

  22. Beamtracking 22 • Massive MIMO to form directional radiation patterns • Linear arrays: HPBW ~ 102/N • Positive effects: • Much less interference • Noise-limited regime? • Negative effects: • Beam alignment needed • Array switching time ~2μs • Exhaustive vs. hierarchical • Delays and loss in capacity?

  23. Beamtracking: noise-limited? 23 • Petrov, V., Komarov, M., Moltchanov, D., Jornet, J. M., & Koucheryavy, Y. Interference and SINR in millimeter wave and terahertz communication systems with blocking and directional antennas. IEEE Transactions on Wireless Communications, 16(3), 1791-1808, 2017.

  24. Beamtracking: loss in capacity 24 • Gerasimenko, M., Moltchanov, D., Gapeyenko, M., Andreev, S., Koucheryavy, Y., "Capacity of Multi-Connectivity mmWave Systems with Dynamic Blockage and Directional Antennas", Accepted to IEEE Trans. Veh. Tech., 2018.

  25. Extreme and complex path loss 25 • Received psd is • LP(f,r) – spreading losses • LA(f,r) – absorption losses • where is transmittance • K(f) – absorption coefficient • Booger-Lambert-Beer law

  26. Extreme and complex path loss 26

  27. Addressing latency 27 • Main challenge • NR frame duration: 1ms • Latency < 1ms • How to conform? • Two principal ways • Reservation/priorities • Non-orthogonal multiple access (NOMA) • Intentional overlapping of data • Enabled by flexible NR slot numerology • How to communicate decision to IoT UEs?

  28. Addressing reliability 28 • Blockage may or may not lead to outage • Case 1: blockage leads to lower MSC scheme • Case 2: blockage leads to outage • Case 1: provide more resources • Bandwidth reservation • Isolated deployments • Case 2: find a new path • 3GPP multi-connectivity • Dense deployments

  29. Reliability: multi-connectivity 29 • Avoiding outage • Gapeyenko, N., Petrov, V., Moltchanov, D., Akdeniz, M., Andreev, S., Himayat, N., Koucheryavy, Y., "On the Degree of 3GPP Multi-Connectivity in Urban 5G Millimeter-Wave Deployments", IEEE Trans. Veh. Tech., 2018.

  30. Reliability: bandwidth reservation 30 • Alleviating lower MCSs • Moltchanov, D., Samuylov, A., Petrov, V., Gapeyenko, M., Himayat, N., Andreev, S., and Koucheryavy, Y. (2018). Improving Session Continuity with Bandwidth Reservation in mmWave Communications. IEEE Wireless Communications Letters, 2018.

More Related