1 / 22

2001 ASME/API Gas-Lift Workshop

2001 ASME/API Gas-Lift Workshop. Routine Validation Testing of Every Gas-Lift Valve Informal Presentation by Naiza Abdullah, Brunei Shell Petroleum Ken Decker, Decker Technology. Routine Validation Testing of Every Gas-Lift Valve. Outline Brief history

shive
Download Presentation

2001 ASME/API Gas-Lift Workshop

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 2001 ASME/API Gas-Lift Workshop Routine Validation Testing of Every Gas-Lift Valve Informal Presentation by Naiza Abdullah, Brunei Shell Petroleum Ken Decker, Decker Technology 2001 ASME/API Gas-Lift Workshop

  2. Routine Validation Testingof Every Gas-Lift Valve • Outline • Brief history • Business justification for routine testing • How the tester works • Intended operational use • Field experience • Outstanding issues 2001 ASME/API Gas-Lift Workshop

  3. Routine Valve TestingA Brief History • History • Only the Ptro test is performed routinely • In 1995, API RP 11V2 provided standards for testing and modeling gas-lift valves • In 1996, the Valve Performance Clearinghouse, an industry JIP, was formed to implement 11V2 • Typically, the VPC tests one valve of each type • Purpose of Gas-Lift Valve, Automatic Validation Tester (GLV-AVT) is to test every gas-lift valve • Before it is run • After it is pulled 2001 ASME/API Gas-Lift Workshop

  4. Routine Valve TestingBusiness Justification • Rationale for testing each valve • Not all valves of a specific type are manufactured to the original specifications • Some companies are not API certified • Some valves may be damaged in handling • Many operating companies re-run used valves • Operating conditions in wells vary • Operators need a high degree of assurance that valves will perform as intended 2001 ASME/API Gas-Lift Workshop

  5. Routine Valve TestingBusiness Justification • Justification for pre-installation testing • Screen out valves that will not perform as intended • Due to manufacturing faults or limits • Due to handling problems • Due to setting problems • Know actual valve characteristics • May be different than "typical" valve tested by VPC • Use actual characteristics in gas-lift programs • Evaluate various valves types/sources • If a given valve type/model is routinely unsatisfactory • If a used valve should not be re-run 2001 ASME/API Gas-Lift Workshop

  6. Routine Valve TestingBusiness Justification • Justification for post-installation testing • Evaluate valve condition • Can it be re-dressed and re-run, or • Should it be discarded • Learn • How well did the valve survive in the well's environment • Is a different valve type needed in this environment • Is a different valve metallurgy needed 2001 ASME/API Gas-Lift Workshop

  7. Routine Valve TestingHow the Tester Works • Quick, simple test of each gas-lift valve • Insert valve in test fixture – 1" and 1.5" available • Apply nitrogen pressure (from N2 bottle) • Conduct these tests, under computer control • Opening pressure • Closing pressure • Port leak rate • Load rate of bellows and/or spring • Maximum effective stem travel • Back check valve leak rate • Port/bellows ("R") ratio • Bellows failure and/or dome leak 2001 ASME/API Gas-Lift Workshop

  8. AVT Front Panel 2001 ASME/API Gas-Lift Workshop

  9. AVT Computer Control 2001 ASME/API Gas-Lift Workshop

  10. Preparing to Test a Valve 2001 ASME/API Gas-Lift Workshop

  11. Close Fixture, Connect Hose 2001 ASME/API Gas-Lift Workshop

  12. Routine Valve TestingHow the Tester Works • Quick, simple test of each gas-lift valve (con't) • Entire test of one valve takes about 3 minutes • Produces a report • Actual test results vs. operator-entered test criteria • A Pass or Fail is declared for each test • Produces a gas-lift valve performance plot • Actual performance plot of the tested valve vs. • Plot based on VPC (or standard) characteristics • Exports a file • Test results and actual valve characteristics can be exported to any gas-lift program • For example, Shell inputs results into WinGLUE 2001 ASME/API Gas-Lift Workshop

  13. AVT Test Results Screen 2001 ASME/API Gas-Lift Workshop

  14. Routine Valve TestingIntended Operational Process • Routine testing of every gas-lift valve • Test every valve before it is run • If valve "passes" all tests, run it • If valve "fails" one or more tests, return it • Have one or more spares on hand • Store every test result in a gas-lift program and a database • Use in program for routine analysis • Use in database to learn, evaluate • Test every valve when it is pulled • Store results in database • Compare "after" performance with "before" 2001 ASME/API Gas-Lift Workshop

  15. Routine Valve TestingInitial Field Experience • Use of the AVT has…. • Increased accuracy of pressure and port leak measurements. • Extended the practice of testing gaslift valves to individuals who may not be familiar with typical shop practices. • Insures a consistently applied testing standard. The technician cannot “help” the valve pass a test. 2001 ASME/API Gas-Lift Workshop

  16. Routine Valve TestingInitial Field Experience • Use of the AVT has… • Found that good valves re-test consistently. • Provided the technician, engineer, and wireline operator with a “certificate” indicating the valve has passed all tests. • Provided a link from the gaslift shop to the engineers desk. 2001 ASME/API Gas-Lift Workshop

  17. Routine Valve TestingInitial Field Experience • Camco BKR-5 valves were tested for Brunei Shell Petroleum in Seria, Brunei • The tested R ratio was MUCH larger than the manufacturer’s published R ratio. • Valves with 3/16” TC ports tested with R ratios of .154. The printed R ratio is .118. • This means the valve will have approximately 30% more casing sensitivity than expected. 2001 ASME/API Gas-Lift Workshop

  18. Chamfered TC Port 2001 ASME/API Gas-Lift Workshop

  19. Routine Valve TestingInitial Field Experience • Camco BKR-5 valves were tested for Brunei Shell Petroleum in Seria, Brunei • Back checks do not seal leak tight. • The AVT found several valves with bad O-rings on the seat. • The AVT found 1 valve with a leaking tail plug. • The AVT found several valves with leaking O-rings at the valve body joints. 2001 ASME/API Gas-Lift Workshop

  20. Routine Valve TestingInitial Field Experience • Camco BKR-5 valves were tested for Brunei Shell Petroleum in Seria, Brunei • The loadrate was generally less than 1300 psig/inch. This is expected for valves set at pressures less than 1000 psig. • The effective stem travel was generally less than 0.100 inch. This is less than expected but enough for a 3/16” ported valve with an 8 or 10 choke. 2001 ASME/API Gas-Lift Workshop

  21. Routine Valve TestingOutstanding Issues • There is more work to be done • Initial valve tester is a prototype • Needs to be re-packaged into a fully field-worthy device • It may be possible to use the tester to help conduct some VPC tests • Needs to be evaluated 2001 ASME/API Gas-Lift Workshop

  22. Routine Valve TestingConclusions • This is one more step forward for gas-lift • There is now a cost-effective way to test every gas-lift valve • Before it is run • After it has been pulled • This should greatly improve quality assurance and reduce "infant mortality" that comes from running valves that are not properly suited: • Manufacturing faults • Handling problems • Setting problems 2001 ASME/API Gas-Lift Workshop

More Related