1 / 11

CONDENSATE NEUTRALIZATION Presented by Mike Bernasconi MA Master Plumber Lic#15137

CONDENSATE NEUTRALIZATION Presented by Mike Bernasconi MA Master Plumber Lic#15137 Vice President of Operations Neutrasafe Corporation Quincy, MA. CONDENSATE NEUTRALIZATION The importance of neutralizing condensate produced by high efficiency gas fired appliances. WHAT IS CONDENSATE ?.

shika
Download Presentation

CONDENSATE NEUTRALIZATION Presented by Mike Bernasconi MA Master Plumber Lic#15137

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CONDENSATE NEUTRALIZATION Presented by Mike Bernasconi MA Master Plumber Lic#15137 Vice President of Operations Neutrasafe Corporation Quincy, MA June 10, 2014

  2. CONDENSATE NEUTRALIZATIONThe importance of neutralizing condensate produced by high efficiency gas fired appliances

  3. WHAT IS CONDENSATE ? • Most new residential and commercial heating and hot water systems include a furnace, boiler or domestic water heater of the high efficiency condensing type. • Condensing appliances extract additional BTUs from the water vapor in the flue gas. When the flue gas drops below its dew point of approximately 135 degrees Fahrenheit, it starts to condense and the resulting liquid is acidic and requires treatment.

  4. How Much Condensate? • A general rule of thumb: 1 gallon of condensate is produced for every 100,000 BTUs of input providing the appliance is operating in full condensing mode. • If an appliance having 100,000 BTUs of input operates for 2500 hours annually, it will produce approximately 2500 gallons of condensate.

  5. WHY WE NEED TO NEUTRALIZE • Condensate will generally have a pH of between 3.8 and 4.2. As such it is considered to be acidic and can cause serious damage to piping systems, sewerage systems, treatment facilities, septic systems and other items it may come in contact with. Including cement products and most metals • Products of natural gas combustion generally include nitrogen oxides, sulfur oxides and hydrogen chloride, as well as water vapor and carbon dioxide. Condensing the flue gas produces an acidic solution containing concentrations of nitric, nitrous, sulfuric, sulfurous and hydrochloric acids.

  6. HOW A CONDENSATE NEUTRALIZER WORKS • The condensate from the boiler, furnace or water heater is drained into a neutralizing device which contains a media that works to raise the pH of the condensate to a safe level before discharging it into the drainage system. • Most neutralizing devices use some form of calcium carbonate as the media. • As the condensate reacts with the media we are left with water and carbon dioxide and salts.

  7. WHAT TO LOOK FOR • Most neutralizers on the market today are of the straight through type with an inlet on one end and an outlet on the other. CN2STR CN3STR

  8. WHAT TO LOOK FOR…cont. • These units must be installed in a horizontal position with a ¼” pitch. This allows the condensate to “soak” and the media to do its job while the condensate travels thru the unit. The longer the condensate is in contact with the media the better the neutralization. • We recommend installing an atmospheric vent between the appliance and the neutralizer. This will eliminate any double trap issues as most appliances have an internal trap to keep flue gases from escaping. • We recommend changing the media on an annual basis. Exact intervals can be determined by checking the pH of the condensate at the outlet.

  9. WHAT TO LOOK FOR…cont. • A clear body allows you to see what is happening inside the unit. • Clean media free of sand or dust particles will make clogging of unit less likely. Some media that contains pelletized lime and other products may disintegrate causing drain and condensate pump clogs and a loss of performance. Media which contains the most calcium carbonate CACO3 also known as calcite will be the most effective. • Manufacturer’s installation and operation manuals should be available. Also an MSDS sheet for the media should be available on line if not on sight.

  10. SIZING A NEUTRALIZER • Sizing guidelines are just that, guidelines, as each system operates differently. A 200,000 BTU input boiler may be sufficient with a neutralizer that gives a guideline of 220,000 BTUs, however a high demand water heater of the same input may need a bigger unit or media changes more often. • The only sure way to know if the unit is operating properly is to regularly check the pH of the condensate at the outlet.

  11. Questions?

More Related