1 / 4

How to set the carb on a cub cadet mower

How to set the carb on a cub cadet mower

shendave
Download Presentation

How to set the carb on a cub cadet mower

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AMAZON VENDER Course

  2. How to Set the Carb on a Cub Cadet Mower Cub Cadet is an American company that manufactures power field and garden equipment, like string trimmers, walk-behind lawnmowers and riding garden tractors. The Cub plebe garden tractor includes a four-stroke ICE mounted up front to power the rear wheels and numerous attachments, like a cutting deck. The fuel delivery system on the engine may be a carburetor that ensures the engine has the right fuel-to-air mixture. changes may be performed on the carburetor to fine-tune the fuel-to-air mixture. Step 1 Start the engine and set the throttle lever to the halfway mark. Let the engine run some ten minutes to bring it to operational temperature. Move the throttle lever to its lowest setting and allow the engine to idle.

  3. Step 2 Open the hood. find the carburetor mounted on the facet of the engine behind the air cleaner assembly. find the low idle fuel adjustment screw close to rock bottom of the carburetor wherever it attaches to the manifold. Step 3 Turn the low idle fuel adjustment screw counterclockwise employing a flat- head screwdriver till the engine speed starts to decrease, indicating the fuel- to-air mixture is wealthy. build a attention of the position of the screw. Step 4 Turn the low idle fuel adjustment screw clockwise till the engine speed increases. still flip the screw clockwise till the engine speed decreases once more, now indicating the fuel-to-air mixture is lean. build a attention of the position of the screw. Step 5 Turn the low idle fuel adjustment screw to some extent midway between the too-rich and too-lean settings established previously within the procedure. Step 6 Connect a portable auto tester to the engine using the instructions that came with the tester. Switch the tester to the tach perform. check that the tester indicates that the idle speed is between 1200 and 1500 rev, betting on the model of tractor. Check the owner's guide for your explicit model to search out the precise idle speed needed.

  4. Step 7 Turn the idle speed adjustment screw on prime of the carburetor with a flat- head screwdriver within the direction required till the tester shows the right engine rev. Disconnect the tachometer, shut off the engine and shut the hood. Read More Article on Ali2.com Buy Lawn Mower Parts on Amazon Vender

More Related