1 / 12

DC Motor Control Project

DC Motor Control Project. Group A ALEXANDER M FUNK LAM D NGUYEN JAKEISHA D THOMPSON PAULETTE J VERNON ERIC G ZAISER 10/22/01. Project Overview. Objective

shaw
Download Presentation

DC Motor Control Project

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. DC Motor Control Project Group A ALEXANDER M FUNK LAM D NGUYEN JAKEISHA D THOMPSON PAULETTE J VERNON ERIC G ZAISER 10/22/01

  2. Project Overview Objective “The group must design, construct, and control a dc homemade motor, commutation system, control system, and a speed measurement device such that the machine assembly rotates at selected speeds.”

  3. Project Overview Specifications • The outer diameter of the rotor must be between 1.5 and 4.5 inches. • The length of the rotor housing must be between 2 and 6 inches. • A commutator must be built. • Standard magnets must be used • Supply jacks must be supplied for an unknown resistance

  4. Team Management

  5. SCHEDULE

  6. Motor Design • Four Pole Motor • Simple Lap Winding • Digital Control Using Simulink and Real-Time Workshop

  7. Stator • Basic Design • Adhesive • Magnets

  8. Commutator • 1.5 inch inner diameter copper pipe • 12 segments required for four pole operation • vinyl insulation from the shaft • brush contact • 12 segments (2 x 0.78 inches ) • Built platform

  9. Machining • Shaft • Stator • Commutator

  10. CONTROL BASIC CONTROL BASIC • Motor Will Be Controlled Digitally Using Simulink and Real-Time Workshop • Interfaced to Amplifier and Encoder with Servotogo Board

  11. CONTROLS DETAIL • Controls Research • Hardware Research • Motor Modeling • Final Control Design • Testing/Refining

  12. Team Member Progress • Paulette Vernon • Lam Nguyen • Alexander Funk • Eric Zaiser • Jakeisha Thompson

More Related