1 / 8

What is work? How does it occur?

What is work? How does it occur?. The result when a force moves an object a certain distance. Simple Machines. Force: Any Push Or Pull. Identify various types of systems Identify the purpose, inputs and outputs of various systems.

sevita
Download Presentation

What is work? How does it occur?

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. What is work?How does it occur? The result when a force moves an object a certain distance.

  2. Simple Machines Force: Any Push Or Pull Identify various types of systems Identify the purpose, inputs and outputs of various systems A “machine” is anything that reduces or changes the direction of the force that must be applied to move any object Complex machines such as a cars are made up of many simple machines as well as non-machine components such as electronics

  3. Ancient Culture Machines

  4. The wedge is like an inclined plane. Actually, a wedge is two inclined planes joined together back to back. Examples of a wedge are an ax, the point of a nail, a doorstop, and a knife. An inclined plane is a flat surface set at an angle (other than a right angle) against a horizontal surface. An inclined plane is a simple machine with no moving parts. It is simply a straight slanted surface. An inclined plane wrapped around a cylinder is another type of simple machine called the screw. Apulleyis a rope, belt, or chain wrapped around a grooved wheel. Pulleys can be fixed or moveable. The pulley is actually a variation of another simple machine...the lever. A wheel and axle is a simple machine made up of two circular objects of different size. The axle (a small wheel) is attached to the center of a larger wheel. All wheels need an axle. The wheel and axle must move together to be a simple machine. A wheel and axle lifts or moves loads. A lever is a rigid bar that rests on a fulcrum (a fixed point.) Something or someone must put force (push or pull) on a lever to make it work. The farther the force is from the fulcrum, the easier it is to work the lever. Levers may change the direction as well as the amount of force. There are three classes (kinds) of levers.

  5. “Low Tech” Mechanical Systems Any system that contains at least one simple system could be correctly described as a machine.

  6. Machines make tasks easier to perform! Levers Load force (force that the input force has to overcome in order to cause movement) is in the middle Input force (effort applied to the lever) is in the middle Fulcrum (pivot point of a lever) is in the middle

  7. Simple or Complex?Page 34 Figure 12 The combination of simple machines makes them complex machines... Or does it? “All machines are simple machines.” Do you agree or disagree?

  8. Check your learning... Which of the following simple machines do you feel has the greatest effect on humans: The inclined plane The lever The wheel and axle? Page 35 #3,5

More Related