WECC-0074
This presentation is the property of its rightful owner.
Sponsored Links
1 / 10

Joint Session Webinar January 10, 2013 PowerPoint PPT Presentation


  • 93 Views
  • Uploaded on
  • Presentation posted in: General

WECC-0074 Steady-State and Dynamic Data Requirements Criterion MOD- (11 and 13)-WECC-CRT-1 Don Streebel Drafting Team Chair. Joint Session Webinar January 10, 2013. WECC-0074. Criterion addresses fill-in-the blank NERC Standards MOD-011 and MOD-013

Download Presentation

Joint Session Webinar January 10, 2013

An Image/Link below is provided (as is) to download presentation

Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author.While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server.


- - - - - - - - - - - - - - - - - - - - - - - - - - E N D - - - - - - - - - - - - - - - - - - - - - - - - - -

Presentation Transcript


Joint session webinar january 10 2013

WECC-0074Steady-State and Dynamic Data Requirements CriterionMOD-(11 and 13)-WECC-CRT-1Don StreebelDrafting Team Chair

Joint Session Webinar

January 10, 2013


Wecc 0074

WECC-0074

  • Criterion addresses fill-in-the blank NERC Standards MOD-011 and MOD-013

  • Stated purpose of Standards – “establish consistent data requirements, reporting procedures and system models to be used in the analysis of the interconnected transmission systems”.


Wecc 00741

WECC-0074

  • Data for system models is required for steady-state and dynamic stability studies for WECC-wide system evaluation and operations support by the various WECC members. Study examples include seasonal OTC studies, WECC’s annual study program, WECC path rating studies and regional and local area studies.


Wecc 00742

WECC-0074

  • The Criterion assigns development of steady-state and dynamic data requirements to the Technical Studies Subcommittee (TSS). Approval of the TSS recommendations is assigned to the Planning Coordination Committee (PCC). Requesting the PCC-approved data is conducted by WECC. Providing the PCC-approved data is conducted by the specific Functional Entities.


Wecc 00743

WECC-0074

  • PCC reviewed the Criterion at October, 2011 meeting with no recommendations for change.

  • WECC standards/criteria approval procedure changed from Standing Committee approval to Ballot Pool approval March 1, 2012

  • PCC reviewed Criterion again at March, 2012 meeting suggesting substantive changes.

  • Two subsequent postings for comments and responses followed.


Wecc 00744

WECC-0074

  • Last of comment postings concluded November 2, 2012

  • No substantive Criterion changes were made in response to the latest comments

  • Use of Area Coordinator still controversial

    • Prohibited under the procedures


Wecc 00745

WECC-0074

  • Use of Area Coordinator

    For purposes of the Applicability section, the Procedures will only allow the use of Responsible Entities listed in the NERC Functional Model. Therefore, the area coordinator entity cannot be included in the Applicability section of the Criterion.


Wecc 00746

WECC-0074

  • Use of Area Coordinator

    The Criterion does not preclude the continued delegation of tasks to the Area Coordinator by an applicable Functional Entity. However, the applicable Functional Entity remains responsible for the completion of the tasks.


Wecc 00747

WECC-0074

  • Seeking approval of WECC-0074 Steady-State and Dynamic Data Requirements Criterion MOD-(11 and 13)-WECC-CRT-1

    • Ballot from December 24, 2012 through January 16, 2013.


Joint session webinar january 10 2013

Questions?


  • Login