'Cooling plate' presentation slideshows

Local Supports for Inclined Layout: CERN Update

Local Supports for Inclined Layout: CERN Update. D. Alvarez Feito CERN EP-DT-EO. CERN, November 2016. Local Support Designs for Inclined Layouts. Stave/ Longeron Approach Conservative approach (two pipes per module) Intermediate approach (single pipe per module, soldered interfaces)

483 views • 28 slides

NA62 Gigatracker cooling requirements

259 views • 13 slides

TRT Barrel Cooling: Electronics

236 views • 11 slides

TRT Barrel Cooling: Electronics

127 views • 11 slides

DTL Faraday Cups Mechanical Design

DTL Faraday Cups Mechanical Design. Thomas Grandsaert Development Engineer. www.europeanspallationsource.se 13 December, 2018. DTL Faraday Cups Full system. Spring. Bellows. Pneumatic actuator with at least 120mm stroke. ComVAT WS flange. FC.

117 views • 10 slides

Fuse Box Design & Mounting Chiho Wang Duke University

Fuse Box Design & Mounting Chiho Wang Duke University. HV granularity. Type 1: 14/module ? 6/module = 3/fuse box Type 2: 12/module ? 6/module = 3/fuse box Type 3: 10/module ? 10/module = 5/fuse/box Present design: type 1: 4 + 3 hv lines each box, no jumper

104 views • 10 slides

Collimator Test-Bench Heating Test

Primary Goals To measure the thermal impedance between graphite and the cooling plate as a function of the applied pressure To verify the temperature distribution in the collimator jaw baseline design (graphite, copper cooling plate, s.steel support structure) and compare to simulations

218 views • 9 slides