'1 ohm' presentation slideshows

Experiment 3

Experiment 3. Part A: Making an Inductor Part B: Measurement of Inductance Part C: Simulation of a Transformer Part D: Making a Transformer. Review RLC and Resonance. How can the transfer function be greater than 1? At resonance, impedance value is a minimum

574 views • 57 slides

Experiment 3

Experiment 3. Part A: Making an Inductor Part B: Measurement of Inductance Part C: Simulation of a Transformer Part D: Making a Transformer. Inductors & Transformers. How do transformers work? How to make an inductor? How to measure inductance? How to make a transformer?. ?. Part A.

421 views • 42 slides

Experiment 3

Experiment 3. Part A: Making an Inductor Part B: Measurement of Inductance Part C: Simulation of a Transformer Part D: Making a Transformer. Inductors & Transformers. How do transformers work? How to make an inductor? How to measure inductance? How to make a transformer?. ?. Part A.

430 views • 42 slides

ELECTRIC CIRCUITS ECSE-2010 Spring 2003 Class 6

ELECTRIC CIRCUITS ECSE-2010 Spring 2003 Class 6. ASSIGNMENTS DUE. Today (Monday): HW #2 Due Experiment #1 Report Due Activities 6-1, 6-2, 6-3, 6-4 (In Class) Activities 6-2 and 6-3 will use an ILM Tuesday/Wednesday: Will do Experiment #2 In Class (EP-2) Activities 7-1, 7-2, (In Class)

408 views • 31 slides

555 views • 26 slides

What are the Features of Sub Ohm Vaping?

Welcome to the domain of Sub Ohm vaping, referred to most as simply "Sub Ohming". This has nothing to do with Sub-Zero from Mortal Kombat and everything to do with atomizers that are fit for terminating at under 1 Ohm of resistance.

282 views • 17 slides

Chapter 04 ????

303 views • 12 slides

INSULATION TESTER CALIBRATION Using the 3200 Electrical Test Calibrator

INSULATION TESTER CALIBRATION Using the 3200 Electrical Test Calibrator. INSULATION TESTER CALIBRATION Overview. The 3200 has five functions for calibrating insulation testers : High value resistance output for insulation testing (0 MOhms to 2,000MOhms)

207 views • 7 slides

The Importance Of Current Sense Resistor In Switch Mode Power Supply

The current sense resistor is normally found in the switch mode power supply section. If you fix electronic equipment especially the switch mode power materials, the current sensing resistor is linked to the source pin of power FET (field impact transistor) and the other end to HOT GROUND. The worth of the current sense resistor is in the variety of 0.1 ohms to about 1 ohm. In some cases where overload happen-the power section will blow and many of the time the elements altered are the fuse, power feed, PWM IC, Zenner diode and current sense resistor.

15 views • 1 slides