1 / 8

Desuperheaters on Residential Air-Source Heat Pumps

Desuperheaters on Residential Air-Source Heat Pumps. August 5, 2008 Regional Technical Forum. Installation/Overview. Source: Turbotec Products, Inc. “ENVIRO-PAK Installation, Operation, and Maintenance Manual” http://www.turbotecproducts.com/Literature_files/Enviro-Pak%20IOM.pdf.

Download Presentation

Desuperheaters on Residential Air-Source Heat Pumps

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Desuperheaters on Residential Air-Source Heat Pumps August 5, 2008 Regional Technical Forum

  2. Installation/Overview Source: Turbotec Products, Inc. “ENVIRO-PAK Installation, Operation, and Maintenance Manual” http://www.turbotecproducts.com/Literature_files/Enviro-Pak%20IOM.pdf

  3. Manufacturers • Trevor-Martin Corporation manufactures multiple models under various brand names http://www.trevormartin.com/index.asp • Turbotec Products, Inc. manufactures the “Enviro-Pak” http://www.turbotecproducts.com/EPhome.html • Others – Primarily Commercial/Industrial Equipment • Therma-Stor LLC • Doucette Industries, Inc.

  4. Cost • Cost Components • Equipment Purchase • Desuperheater • Installation • Mount desuperheater • Recover Refrigerant • Install Refrigerant Lines between desuperheater and compressor discharge line • Install new storage tank (or drain existing tank if not using a storage tank) • Install Water Lines between desuperheater and storage tank • Charge heat pump with refrigerant • Insulate refrigerant and water lines • Commission the system • Turbotec (source: Turbotec Representative) • Trade Price: $583 • Installation: about $1000 • does not include storage tank option • Total Installed Cost: about $1500 • Trevor Martin (source: Trevor Martin Representative) • Online Retail: $425 • Total Installed Cost: $900 • ORNL 1983 Report • Total Installed Cost: $600 in 1983 (or $1100 in 2008) • Does not include storage tank option • Obtained through dealer quotes

  5. Energy Savings • ORNL 1983 Report: • Method: Monthly Bin Analysis • Assumptions: • 20% of heating and cooling capacity available to heat water. • 75 gallons/day hot water use evenly distributed throughout the day • Energy Savings:

  6. Cost Effectiveness • Assumptions: • 5th Plan Assumptions • Measure Life: 10 years • Measure Load Shapes • Winter Savings: ResSpHtHP • Summer Savings: ResCAC

  7. Potential Issues • Poor track record when installers are asked to add more complex equpiment to a heat pump. • A second water tank should be installed to realize best savings. • In retrofit cases, installation costs will vary widely, depending on location of HP with respect to the water heater. The desuperheater should be located near the water heater (non-freezing area). • Summer savings will vary, depending on how much air-conditioning the house uses. How would a program pick out the high users effectively? • High efficiency equipment has less superheat. • In heating mode, how much is the supply air temperature affected (cooled)? Comfort issues? • Others?

  8. Next Steps • Consensus on pursuing this measure further? • Perform more detailed modeling? • Support a small real-world monitoring project? • Obtain better cost data?

More Related