1 / 29

Use the left mouse button to move forward through the show

The following slides are provided by Dr. Vincent O’Flaherty. Use the left mouse button to move forward through the show Use the right mouse button to view the slides in normal view , edit or print the slides. Anaerobic digestion of sulphate-containing wastewaters.

santa
Download Presentation

Use the left mouse button to move forward through the show

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. The following slides are provided by Dr. Vincent O’Flaherty. Use the left mouse button to move forward through the show Use the right mouse button to view the slides in normal view, edit or print the slides

  2. Anaerobic digestion of sulphate-containing wastewaters • Industrial wastewaters can, in general, be effectively treated using anaerobic digestion - produces large quantities of methane which can be burned to generate electricity or for heating - use of combined heat and power plants allows for generation of electricity and heat recovery • Normally less than 10% of the biogas produced is required to operate the plant - also produces far less waste biomass than aerobic system = less disposal costs

  3. Modern digester design makes the process more attractive - can operate at high rates and therefore smaller, cheaper digester can be used • Usual procedure is to have first stage anaerobic and then small activated sludge plant to “polish” the effluent = achieve discharge standards. May need some nutrient removal or other tertiary steps depending on the fate of the effluent

  4. Problematic industrial wastewaters • Application to industrial wastewaters can occasionally be complicated by microbiological problems - typical example is treatment of sulphate containing wastewaters - examples of the type of negative microbial interactions which can occur in an engineered ecosystem • Industrial wastewaters can contain high levels of recalcitrant organic chemicals (e.g. chloroform, carbon tetrachloride etc.), xenobiotic products and side products (insecticides, herbicides, detergents etc.)

  5. Can also contain significant quantities of inorganics some of which may be highly toxic e.g. cadmium in tannery wastewater • In anaerobic systems the presence of alternative external oxidising agents ( e.g. sulphate SO42-) can promote the development of a sulphate-reducing rather than a methanogenic population • This will result in the channelling of electrons towards the formation of H2S not methane

  6. SRB and anaerobic digestion • Very complex systems - absolute need to fully understand the microbiology in order to control treatment plant operation - i.e on one hand a useable fuel is generated and on the other hand a malodourous atmospheric pollutant is produced under sulphidogenic conditions • Presents a challenge to microbiologists because of the complexity of the systems and the technical difficulty in studying them

  7. Examples of wastewaters that contain high-levels of sulphate include: • Molasses-based fermentation industries - e.g. citric acid production, rum distillery • Paper and board production • Edible oil refinery • Many other industries use sulphuric acid in their processes - leads to sulphate in the ww

  8. So what? • In the absence of external oxidising agents (sulphate, nitrate, etc.) anaerobic ecosystems are methanogenic - flow of reducing equivalents is directed towards the reduction of CO2 to CH4 • In the presence of sulphate - the flow may be redirected towards the reduction of sulphate to sulphide by sulphate reducing bacteria (SRB) • In other words there is a competition between different microorganisms for substrate

  9. What will determine the outcome of competition? • Very important to know as on one hand a useable fuel is produced, while on the other hand a toxic, corrosive malodourus compound is produced

  10. Bacteria that reduce sulphate to H2S are either assimilatory or dissimilatory: • 1. Assimilatory Sulphate Reduction: Carried out by many different bacteria - purpose is to reduce sulphate to sulphide prior to uptake of S for assimilation into S-containing proteins etc. • No major environmental effect only amount of sulphate needed for bacterial growth is reduced • e.g Klebsiella sp. - only reduce 1 mg sulphate for every 200 mg (d.wt.) of cells produced

  11. 2. Dissimilatory Sulphate Reduction: Totally different process only carried out by a unique group of bacteria carrying out anaerobic respiration using sulphate as electron acceptor • Consequently transform large amounts of sulphate to H2S during growth • e.g. Desulphovibrio sp. - for every 1 mg of sulphate reduced, only 0.5- 1.0 mg (d.wt) of cells are produced

  12. SRB exhibit enormous ecological, morphological and nutritional diversity - grouped together only on the basis of carrying out dissimilatory sulphate reduction - 1 common property • Widely distributed in the natural environment - include both sporeformers (Desulfomaculum sp.) and non-sporeformers (Desulfovibrio sp.)

  13. 13 eubacterial and 1 archaeal genera • Can be divided into two broad categories based on their metabolism: • 1. Incomplete Oxidisers: carry out incomplete oxidation of organic compounds to acetate, CO2 and H2S - can use a very wide range of starting organics e.g. aliphatic mono- and dicarboxylic acids, alcohols, amino acids, sugars, aromatic compounds etc.

  14. Desulfomicrobium, Desulfobulbus, Desulfoboyulus, Thermodesulfobacterium, Desulfovibrio*, Desulfomaculatum* • * Most common species

  15. 2. Complete oxidisers: Complete oxidation of starting organic substrates to CO2 and H2S - same wide range of substrates, but can also grow on acetate, breaking it down completely to CO2 • Desulfobacter, Desulfococcus, Desulfosarcina, Desulfomonile, Desulfonema, Desulfoarculus, Archaeoglobus • Chemolithotrophic species also common - grow on H2/CO2 or on CO very common ability to grow on H2 - very important in certain ecosystems

  16. Basically use H2 as energy source and fix CO2 (autotrophic as carbon source) • 4H2 + SO42- + H+ -----> 4 H2O +HS- G˚´ = -150KJ/mole • Very favourable reaction energetically

  17. SRB very versatile metabolically - in the absence of sulphate in their environment, they can switch from anaerobic respiration to chemoorganotrophic fermentation - energy gain by substrate level phosphorylation only • V. important as allows maintainence of SRB in the absence of sulphate

  18. 2 types of fermentation possible: 1. Fermentation (independent of H2 conc.) • Grow fermentatively on sugars, carboxylic acids, alcohols etc. • Incomplete degradation to l.mwt acids and alcohols and CO2

  19. 2. Growth as syntrophic OHPA species (H2 dependent) • Convert higher carbon-number alcohols, acids, ketones etc. to acetate + H2 or acetate + CO2 + H2 • Same restrictions as syntrophs

  20. What happens during anaerobic treatment of sulphate containing wastewaters? • Competition between SRB and other anaerobes for common organic and inorganic substrates • Competition for energy and reducing equivalents • Between SRB and Fermentative bacteria, between SRB and OHPA, between SRB and Acetoclastic and Hydrogenophilic methanogens

  21. Carbon flow in anaerobic digesters: 1 = Hydrolytic/fermentative bacteria; 2 = Obligate hydrogen producing acetogens; 3 = Homoacetogenic bacteria; 4a = Acetoclastic methanogens; 4b = Hydrogenotrophic methanogens; 5 = Fatty acid synthesising bacteria (O'Flaherty, 1997).

  22. Negative effects of competition • 1. Reduction of potential methane yield - diversion of substrates/reducing equivalents to H2S • 2. Sulphide Toxicity - H2S is toxic to all cells - toxicity is pH dependent • Only the unionised form of H2S to membrane permeable

  23. H2S <====> H+ + HS- • HS- <====> H+ + S- • At neutral pH approximately 20-50% of the H2S is present in the unionised form • At pH 8-9 virtually all the H2S is undissociated - toxicity increases with increasing pH

  24. With respect to AD, fermentatives are far less susceptible to H2S toxicity than syntrophs, methanogens or even SRB • IC50 of 50-400 mg/l H2S for methanogens • 3. H2S in the biogas - H2S is very volatile, so will appear in the biogas causing problems of odour, corrosion, release of SO2 during burning

  25. May well have to be stripped from the biogas - costly • 4. Dissolved sulphide in the effluent - odour, oxygen demand, post-treatment costs • 5. Precipitation of Alkali metals - Fe, cobalt etc. • 6. Sulphate toxicity - salt effects, not usually significant

  26. HOW TO SOLVE THE PROBLEMS • Eliminate sulphate from the process, occaisonally possible using chemical precipitation, often not • Engineer the ww treatment process, need to understand the microbial ecology

  27. Outcome of competition is determined by the following factors: • COD/BOD concentration • Chemical composition of the ww • Sulphate conc. • COD/BOD:sulphate ratio • Bacterial population of the sludge • pH of reactor operation • Mass transfer limitations

  28. Very complex microbiological problem: • Theoretical predications can be made based on kinetic and thermodynamic considerations • However, these do not correspond to what is measured in practical situations - especially for conversion of the key (70% of biogas) substrate acetate • See: review for discussion

More Related