70 likes | 140 Views
QS: Offline Register. To register QS Offline Follow the steps below: 1- Download. 2- Install. 3- Register. Continue = Mouse Click Exit = <Esc> Key. 1- Download. Use a connected computer to download QuikScripts from: http://www.quikscripts.net
E N D
QS: Offline Register • To register QS Offline Follow the steps below: 1- Download. 2- Install. 3- Register. Continue = Mouse Click Exit = <Esc> Key
1- Download • Use a connected computer to download QuikScripts from: http://www.quikscripts.net • The downloaded program must be stored on your hard drive or on a large media that can be read by your internet computer (online) and your work(QS) computer (offline). An example of such a media would be a Zip disk, USB memory stick, or CD (with a CD burner- common on most computers for the last two years). • Take the media to your offline computer. Continue = Mouse Click Exit = <Esc> Key
2- Install Place the media in your offline computer. Run the QS setup from the media. The Setup screens will guide you through the setup process. Continue = Mouse Click Exit = <Esc> Key
3- Register(1) • Launch QS, the contact info screen will appear. • Fill in the required info. • Check the ‘register offline’ box. • Press the ‘Purchase >’ button. Continue = Mouse Click Exit = <Esc> Key
Register(2) • The offline submission screen will appear. • Place an empty floppy in your A: drive. • Press the ‘Submit/DSK’ button. • The QS will provide more instructions to follow. Continue = Mouse Click Exit = <Esc> Key
Register(3) • Take the floppy back to the connected computer • Place the floppy in A: drive • Run the ‘GetKey’ program from the floppy • GetKey will guide you through the purchase process. • Wait for 12-15 minutes then run again GetKey to retrieve your key. • If the key is retrieved you’ll be informed to take the floppy to the offline computer. Continue = Mouse Click Exit = <Esc> Key
Register(4) • Place the floppy in A: drive (offline computer). • Run QS. • The Retrieve screen will appear, press the ‘Retrieve’ button. • QS will automatically retrieve the key. • The end. Continue = Mouse Click Exit = <Esc> Key