1 / 2

Heater fan resistors replacement

The heater fan resistor is located underneath the dashboard in the heater/AC compartment......https://www.sacer-shop.com

sacer2017
Download Presentation

Heater fan resistors replacement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Heater fan resistors replacement Key Words: Heater fan resistor, blower resistor, heater resistor, blower resistor replace The heater fan resistor is located underneath the dashboard in the heater/AC compartment. The resistor enables the heater blower motor to change the speed of the fan. Without this part you will not be able to change the speed of the airflow from the blower motor. It is also possible that the heater motor blower may not work at all. If the resistor has gone bad, it is likely that the fan will work only on the highest speed. When a heater fan resistor fails, the highest fan speed usually is the only one that still works because it essentially bypasses the resistor and receives the maximum amount of voltage. When the resistor is working, it reduces the amount of voltage going to the lower fan speeds so the fan runs slower. The air and heating system in your vehicle is a closed system, so it won’t be inspected during servicing and routine maintenance. If no air is coming out of your vents, you may have a problem with the heater blower motor as well as the resistor. Mechanical resistance to the fan (such as when something gets stuck in the fan), can often cause damage to the heater blower motor resistor. If you notice any part of the air and heating system behaving bizarrely, however, you should always schedule an inspection. If your fan is stuck on high, you likely have a bad heater blower resistor, and should schedule to have it replaced. Blower resistors are small parts that can become corroded or just burn out, and a new one often costs less than $50. Because they’re usually under the dashboard on the passenger’s side or behind the glove box, near the blower motor, they can be hard to reach if they need to be replaced. 1 Copyright © SACER . All Rights Reserved

  2. SA1473 Heater resistor is used in A/C vent to adjust the temperature. Brand new resistor fully meet the OE specifications. Built-in circuit protection device ensures an extended service life. Optima replacement just works the same as the original one. It has been carefully researched and compiled to replace each specific application. Compatibility of car Make and Model is as below, Car make Car model Citroen C2, C3, C5 Peugeot 1007, 207, 406, 607 Clio III, Grand Scenic, Megane II, Scenic I, Scenic II,Modus, Grand MODUS, TWINGO II Renault Nissan Micra,MICRA III,Note(E11) SACER LTD was founded in 2007 by enthusiasts in car repair & re-manufacture especially focused comprehensive combination of strong knowledge in European design and applied repair & re-manufacture technology and experience in research and development allows us to win customers’ deep trust and long-standing cooperation. SACER is a leading supplier of auto electronics components for car repair and re-manufacture, please check out our online shop for more, https://www.sacer-shop.com on automobile electronics. The 2 Copyright © SACER . All Rights Reserved

More Related