1 / 104

FUNCTIONS AND MODELS

1. FUNCTIONS AND MODELS. FUNCTIONS AND MODELS. 1.6 Inverse Functions and Logarithms. In this section, we will learn about: Inverse functions and logarithms. INVERSE FUNCTIONS. The table gives data from an experiment in which a bacteria culture started with

sabine
Download Presentation

FUNCTIONS AND MODELS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 1 FUNCTIONS AND MODELS

  2. FUNCTIONS AND MODELS 1.6 Inverse Functions and Logarithms • In this section, we will learn about: • Inverse functions and logarithms.

  3. INVERSE FUNCTIONS • The table gives data from an experiment • in which a bacteria culture started with • 100 bacteria in a limited nutrient medium. • The size of the bacteria population was recorded at hourly intervals. • The number of bacteria N is a function of the time t: N = f(t).

  4. INVERSE FUNCTIONS • However, suppose that the biologist changes • her point of view and becomes interested in • the time required for the population to reach • various levels. • In other words, she is thinking of t as a function of N.

  5. INVERSE FUNCTIONS • This function is called the inverse • function of f. • It is denoted by f-1 and read “f inverse.”

  6. INVERSE FUNCTIONS • Thus, t = f-1(N) is the time required for • the population level to reach N.

  7. INVERSE FUNCTIONS • The values of f-1can be found by reading • the first table from right to left or by consulting • the second table. • For instance, f-1(550) = 6, because f(6) = 550.

  8. INVERSE FUNCTIONS • Not all functions possess • inverses. • Let’s compare the functions f and g whose arrow diagrams are shown.

  9. INVERSE FUNCTIONS • Note that f never takes on the same • value twice. • Any two inputs in A have different outputs.

  10. INVERSE FUNCTIONS • However, g does take on the same • value twice. • Both 2 and 3 have the same output, 4.

  11. INVERSE FUNCTIONS • In symbols, g(2) = g(3) • but f(x1) ≠ f(x2) whenever x1 ≠ x2

  12. INVERSE FUNCTIONS • Functions that share this property • with f are called one-to-one functions.

  13. ONE-TO-ONE FUNCTIONS Definition 1 • A function f is called a one-to-one • function if it never takes on the same • value twice. • That is, • f(x1) ≠ f(x2) whenever x1≠ x2

  14. ONE-TO-ONE FUNCTIONS • If a horizontal line intersects the graph of f • in more than one point, then we see from • the figure that there are numbers x1and x2 • such that f(x1) = f(x2). • This means f is not one-to-one.

  15. ONE-TO-ONE FUNCTIONS • So, we have the following • geometric method for determining • whether a function is one-to-one.

  16. HORIZONTAL LINE TEST • A function is one-to-one if and only if • no horizontal line intersects its graph • more than once.

  17. ONE-TO-ONE FUNCTIONS Example 1 • Is the function • f(x) = x3 • one-to-one?

  18. ONE-TO-ONE FUNCTIONS E. g. 1—Solution 1 • If x1≠ x2, then x13≠x23. • Two different numbers can’t have the same cube. • So, by Definition 1, f(x) = x3 is one-to-one.

  19. ONE-TO-ONE FUNCTIONS E. g. 1—Solution 2 • From the figure, we see that no horizontal • line intersects the graph of f(x) = x3 more • than once. • So, by the Horizontal Line Test, f is one-to-one.

  20. ONE-TO-ONE FUNCTIONS Example 2 • Is the function • g(x) = x2 • one-to-one?

  21. ONE-TO-ONE FUNCTIONS E. g. 2—Solution 1 • The function is not one-to-one. • This is because, for instance, g(1) = 1 = g(-1)and so 1 and -1 have the same output.

  22. ONE-TO-ONE FUNCTIONS E. g. 2—Solution 2 • From the figure, we see that there are • horizontal lines that intersect the graph • of g more than once. • So, by the Horizontal Line Test, g is not one-to-one.

  23. ONE-TO-ONE FUNCTIONS • One-to-one functions are important because • they are precisely the functions that possess • inverse functions according to the following • definition.

  24. ONE-TO-ONE FUNCTIONS Definition 2 • Let f be a one-to-one function with • domain A and range B. • Then, its inverse function f-1 has domain B • and range A and is defined by • for any y in B.

  25. ONE-TO-ONE FUNCTIONS • The definition states that, if f maps x • into y, then f -1 maps y back into x. • If f were not one-to-one, then f-1 would not be uniquely defined.

  26. ONE-TO-ONE FUNCTIONS • The arrow diagram in the figure • indicates that f-1 reverses the effect of f.

  27. ONE-TO-ONE FUNCTIONS • Note that: • domain of f -1 = range of f • range of f -1 = domain of f

  28. ONE-TO-ONE FUNCTIONS • For example, the inverse function of • f(x) = x3 is f-1(x) = x1/3. • This is because, if y = x3, then f -1(y) = f -1(x3) = (x3)1/3 = x

  29. ONE-TO-ONE FUNCTIONS Caution • Do not mistake the -1 in f-1 • for an exponent. • Thus, f-1(x) does not mean . • However, the reciprocal could be written as [f(x)]-1.

  30. ONE-TO-ONE FUNCTIONS Example 3 • If f(1) = 5, f(3) = 7, and f(8) = -10, • find f-1(7), f-1(5), and f-1(-10). • From the definition of f-1, we have:f -1(7) = 3 because f(3) = 7f -1(5) = 1 because f(1) = 5f -1(-10) = 8 because f(8) = -10

  31. ONE-TO-ONE FUNCTIONS Example 3 • This diagram makes it clear how f-1 • reverses the effect of f in this case.

  32. ONE-TO-ONE FUNCTIONS Definition 3 • The letter x is traditionally used as the • independent variable. • So, when we concentrate on f-1 rather than • on f, we usually reverse the roles of x and y • in Definition 2 and write:

  33. CANCELLATION EQUATIONS Definition 4 • By substituting for y in Definition 2 and • substituting for x in Definition 3, we get • the following cancellation equations: • f -1(f(x)) = x for every x in A • f(f -1(x)) = x for every x in B

  34. CANCELLATION EQUATION 1 • The first cancellation equation states that, • if we start with x, apply f, and then apply • f-1, we arrive back at x, where we started. • Thus, f-1 undoes what f does.

  35. CANCELLATION EQUATION 2 • The second equation states that • f undoes what f-1 does.

  36. CANCELLATION EQUATIONS • For example, if f(x) = x3, then f-1(x) = x1/3. • So, the cancellation equations become: • f -1(f(x)) = (x3)1/3 = x • f(f -1(x)) = (x1/3)3 = x • These equations simply states that the cube function and the cube root function cancel each other when applied in succession.

  37. INVERSE FUNCTIONS • Now, let’s see how to compute inverse • functions. • If we have a function y = f(x) and are able to solve this equation for x in terms of y, then, according to Definition 2, we must have x = f-1(y). • If we want to call the independent variable x, we then interchange x and y and arrive at the equation y = f-1(x).

  38. INVERSE FUNCTIONS Definition 5 • Now, let’s see how to find the inverse • function of a one-to-one function f. • Write y = f(x). • Solve this equation for x in terms of y (if possible). • To express f-1 as a function of x, interchange x and y. The resulting equation is y = f-1(x).

  39. INVERSE FUNCTIONS Example 4 • Find the inverse function of • f(x) = x3 + 2. • By Definition 5, we first write: y = x3 + 2. • Then, we solve this equation for x : • Finally, we interchange x and y : • So, the inverse function is:

  40. INVERSE FUNCTIONS • The principle of interchanging x and y • to find the inverse function also gives us • the method for obtaining the graph of f-1 • from the graph of f. • As f(a) = b if and only if f-1(b) = a, the point (a, b) is on the graph of f if and only if the point (b, a) is on the graph of f-1.

  41. INVERSE FUNCTIONS • However, we get the point (b, a) from • (a, b) by reflecting about the line y = x.

  42. INVERSE FUNCTIONS • Thus, the graph of f-1 is obtained by • reflecting the graph of f about the line • y = x.

  43. INVERSE FUNCTIONS Example 5 • Sketch the graphs of • and its inverse function using the same • coordinate axes.

  44. INVERSE FUNCTIONS Example 5 • First, we sketch the curve • (the top half of the parabola y2 = -1 -x, • or x = -y2 - 1). • Then, we reflect • about the line y = x • to get the graph of f-1.

  45. INVERSE FUNCTIONS Example 5 • As a check on our graph, notice that the • expression for f-1 is f-1(x) = - x2 - 1, x≥ 0. • So, the graph of f-1is the right half of the parabola y = - x2 - 1. • This seems reasonable from the figure.

  46. LOGARITHMIC FUNCTIONS • If a > 0 and a≠ 1, the exponential function • f(x) = ax is either increasing or decreasing, • so it is one-to-one by the Horizontal Line Test. • Thus, it has an inverse function f-1, which • is called the logarithmic function with base a • and is denoted by loga.

  47. LOGARITHMIC FUNCTIONS Definition 6 • If we use the formulation of an inverse • function given by Definition 3, • then we have:

  48. LOGARITHMIC FUNCTIONS • Thus, if x > 0, then logax is the exponent • to which the base a must be raised • to give x. • For example, log100.001 = - 3 because 10-3 = 0.001

  49. LOGARITHMIC FUNCTIONS Definition 7 • The cancellation equations, when applied to • the functions f(x) = axand f -1(x) = logax, • become: • for every • for every

  50. LOGARITHMIC FUNCTIONS • The logarithmic function logahas • domain and . • Its graph is the reflection of the graph of y = ax about the line y = x.

More Related