1 / 13

Kazuhiro Yamamoto Institute for Cosmic Ray Research The university of Tokyo

Current status (Experiments in Toshiba, Susupension model, Sapphire fibers, Misc.). Kazuhiro Yamamoto Institute for Cosmic Ray Research The university of Tokyo. KAGRA cryogenic payload meeting 26 September 2012. 1. Experiments in Toshiba. Experimental plans in Toshiba

saber
Download Presentation

Kazuhiro Yamamoto Institute for Cosmic Ray Research The university of Tokyo

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Current status (Experiments in Toshiba, Susupension model, Sapphire fibers, Misc.) Kazuhiro Yamamoto Institute for Cosmic Ray Research The university of Tokyo KAGRA cryogenic payload meeting 26 September 2012 1

  2. Experiments in Toshiba Experimental plans in Toshiba In this autumn, there will be cooling test of shileds in Toshiba Keihin Product Operations. At the same time, we have experimental plans in Toshiba. (1) Heat load test (2) Measurement of vibration of shield (3) Measurment of initial cooling time

  3. Experiments in Toshiba Experimental plans in Toshiba (2) Measurement of vibration of shield Vibration of shield could be problems. Vibration via heat links, Scattered light This measurement is at cryogenic temperature and in vacuum. Luca Naticchioni (Rome) and Dan Chenwill measure vertical and horizontal vibration of radiation shield of KAGRA in cooling test, respectively. D. Chen’s talk

  4. Experiments in Toshiba Experimental plans in Toshiba (2) Measurement of vibration of shield Luca Naticchioni’s accelerometer

  5. Experiments in Toshiba Experimental plans in Toshiba (3) Measurment of initial cooling time Initial cooling time for cryogenic payload is about 2 months (if no tricks). At beginningof initial cooling, heat transfer is dominated by radiation. Diamond Like Carbon (DLC) coating (High emissivity, Large radiation) on shields and payload (except for mirror) Y. Sakakibara’s talk

  6. Experiments in Toshiba Experimental plans in Toshiba (3) Measurment of initial cooling time Initial cooling time with DLC (shield and mass) Almost half ! Y. Sakakibara’s talk

  7. Experiments in Toshiba Experimental plans in Toshiba (3) Measurment of initial cooling time We must check the effect of radiation (and DLC coating) on the initial cooling timeexperimentally. We suspend something withoutheat link inside shield and monitor the temperature of something in shiled during cooling test. What is something ? Sample 1 : Sapphire and metal hollow sphere Sample 2 : Dummy payload (hollow masses)

  8. Experiments in Toshiba Experimental plans in Toshiba (3) Measurment of initial cooling time Sample 1 : Sapphire and metal hollow sphere (100 mm in diameter) (100 mm in diameter) Scaling law (Y. Sakakibara’s small experiment: 30 mm in diameter) His talk Evaluation of emissivity

  9. Experiments in Toshiba Experimental plans in Toshiba (3) Measurment of initial cooling time Sample 2 : Dummy payload (hollow masses) Half size Hollow masses (~5 kg) DLC coating Sapphire bulk as dummy mirror Preparation is in progress. S. Koike : Drawing

  10. Experiments in Toshiba Schedule of cooling test and other experiments Schedule could be changed ! October : 1st cryostat Sapphire and metal hollow sphere without DLC coating Novemeber : 2nd cryostat Measurement of vibration of shield (Luca) December : 3rd cryostat : Sapphire and metal hollow sphere with DLC coating January : 4th cryostat Dummy payload Measurement of vibration of shield (Dan Chen) 10

  11. Suspension model Small meeting on 28th of Aug. Attendees : Y. Aso, T. Sekiguchi, M. Nakano, and K. Yamamoto T. Sekiguchi has already constructed the code to evaluate external vibraion and thermal noise. M. Nakano proceeds with the improvement to consider control scheme.

  12. Sapphire fibers IMPEX HighTech GmbH (German company) They can make similar fibers (nail heads on the both ends). Delivery of shot fibers (about 100 mm in length) with nail heads delayed. A head was attached. The other one will be attached. E. Mojorana visited IMPEX on the last week and summarized report. R. DeSalvo and A. Bertolini visit IMPEX on this week. (They also discuss sapphire ribbon) 12

  13. Misc. • ELiTES meeting : 3rd and 4th of Oct. • Program • https://events.ego-gw.it/indico/conferenceTimeTable.py?confId=2#all.detailed • We have other meeting on 5th of Oct. • 2. Y. Sakakibara paper (cryogenic duct) • is finally published ! • Classical and Quantum Gravity 29 (2012) 205019 • http://iopscience.iop.org/0264-9381/29/20/205019 13

More Related