1 / 48

Single Photon Detectors

Single Photon Detectors. By: Kobi Cohen Quantum Optics Seminar 25/11/09. Outline. A brief review of semiconductors P-type, N-type Excitations Photodiode Avalanche photodiode Geiger Mode Silicon Photomultipliers (SiPM) Photomultiplier Superconducting Wire

Download Presentation

Single Photon Detectors

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Single Photon Detectors By: Kobi Cohen Quantum Optics Seminar 25/11/09

  2. Outline • A brief review of semiconductors • P-type, N-type • Excitations • Photodiode • Avalanche photodiode • Geiger Mode • Silicon Photomultipliers (SiPM) • Photomultiplier • Superconducting Wire • Characterization of single photon sources • HBT Experiment • Second order correlation function

  3. Compounds Semiconductors

  4. Semiconductors • electrons and “holes”: negative and positive charge carries • Energy-momentum relation of free particles, with different effective mass

  5. Semiconductors • Thermal excitations make the electrons “jump” to higher energy levels, according to Fermi-Dirac distribution:

  6. Energy conservation • Momentum conservation • photon momentum is negligible  k2≈k1 • useful to remember: Semiconductors • Excitations can also occur by the absorption of a photon, which makes semiconductors suitable for light detection:

  7. Intrinsic Semiconductors • Charge carriers concentration in a semiconductor without impurities:

  8. N-type Semiconductor • Some impurity atoms (donors) with more valence electrons are introduced into the crystal:

  9. P-type Semiconductor • Some impurity atoms (acceptors) with less valence electrons are introduced into the crystal:

  10. The P-N Junction • Electrons and holes diffuse to area of lower concentration • Electric field is built up in the depletion layer • Drift of minority carriers • Capacitance

  11. Biased P-N junction • When connected to a voltage source, the i-V curve of a P-N junction is given by: • We’ll focus on reverse biasing: • larger electric field in the junction • extended space charge region

  12. The P-N photodiode • Electrons and holes generated in the depletion area due to photon absorption are drifted outwards by the electric field

  13. The P-N photodiode • The i-V curve in the reverse-biased P-N junction is changed by the photocurrent • Reverse biasing: • Electric field in the junction increases quantum efficiency • Larger depletion layer • Better signal

  14. The P-I-N junction • Larger depletion layer allows improved efficiency • Smaller junction capacitance means fast response

  15. Detectors: Quantum Efficiency • The probability that a single photon incident on the detector generates a signal • Losses: • reflection • nature of absorption • a fraction of the electron hole pairs recombine in the junction

  16. Detectors: Quantum Efficiency • Wavelength dependence of α:

  17. Summary: P-N photodiode • Simple and cheap solid state device • No internal gain, linear response • Noise (“dark” current) is at the level of several hundred electrons, and consequently the smallest detectable light needs to consist of even more photons

  18. Avalanche photodiode • High reverse-bias voltage enhances the field in the depletion layer • Electrons and holes excited by the photons are accelerated in the strong field generated by the reverse bias. • Collisions causing impact-ionization of more electron-hole pairs, thus contributing to the gain of the junction.

  19. Avalanche photodiode P-N photodiode Avalanche photodiode

  20. Summary: APD • High reverse-bias voltage, but below the breakdown voltage. • High gain (~100), weak signal detection (~20 photons) • Average photocurrent is proportional to the incident photon flux (linear mode)

  21. Geiger mode • In the Geiger mode, the APD is biased above its breakdown voltage for operation in very high gain. • Electrons and holes multiply by impact ionization faster than they can be collected, resulting in an exponential growth in the current • Individual photon counting

  22. Geiger mode – quenching • Shutting off an avalanche current is called quenching • Passive quenching (slower, ~10ns dead time) • Active quenching (faster)

  23. Summary: Geiger mode • High detection efficiency (80%). • Dark counts rate (at room temperature) below 1000/sec. Cooling reduces it exponentially. • After-pulsing caused by carrier trapping and delayed release. • Correction factor for intensity (due to dead time).

  24. Silicon Photomultipliers • SiPM is an array of microcell avalanche photodiodes (~20um) operating in Geiger mode, made on a silicon substrate, with 500-5000 pixels/mm2. Total area 1x1mm2. • The independently operating pixels are connected to the same readout line

  25. SiPM: Examples

  26. Summary: SiPM • Very high gain (~106) • Dark counts: 1MHz/mm2 (~20C) to 200Hz/mm2 (~100K) • Correction factor (other than G-APD)

  27. Photomultiplier • Photoelectric effect causes photoelectron emission (external photoelectric effect) For metals the work function W ~ 2eV, useful for detection in the visible and UV. For semiconductors can be ~ 1eV, useful for IR detection

  28. Photomultiplier • Light excites the electrons in the photocathode so that photoelectrons are emitted into the vacuum • Photoelectrons are accelerated due to between the dynodes, causing secondary emission

  29. Summary: Photomultiplier • First to be invented (1936) • Single photon detection • Sensitive to magnetic fields • Expensive and complicated structure

  30. A remark – image intensifiers • A microchannel plate is an array consists of millions of capillaries (~10 um diameter) in a glass plate (~1mm thickness). • Both faces of the plate are coated by thin metal, and act as electrodes. • The inner side of each tube is coated with electron-emissive material.

  31. Superconducting nano-wire • Ultra thin, very narrow NbN strip, kept at 4.2K and current-biased close to the critical current. • A photon-induced hotspot leads to the formation of a resistive barrier across the sensor, and results in a measurable voltage pulse. • Healing time ~ 30ps

  32. SSPD – meander configuration • Meander structure increases the active area and thus the quantum efficiency

  33. End of 1st part !

  34. Hanbury Brown-Twiss Experiment (1) • Back in the 1950’s, two astronomers wanted to measure the diameters of stars…

  35. Hanbury Brown-Twiss Experiment (2)

  36. Hanbury Brown-Twiss Experiment (3) • In their original experiments, HBT set τ=0 and varied d. • As d increased, the spatial coherence of the light on the two detectors decreased, and eventually vanished for large values of d.

  37. Coherence time • The coherence time τc is originated from atomic processes • Intensity fluctuations of a beam of light are related to its coherence

  38. Correlations (1) • We shall assume from now on that we are testing the spatially-coherent light from a small area of the source. • The second order correlation function of the light is defined by: (Why second order?)

  39. Correlations (2) • For τ much greater than the coherence time:

  40. Correlations (3) • On the other and, for τ much smaller than the coherence time, there will be correlations between the fluctuations at the two times. In particular, if τ=0 :

  41. Correlations: example • If the spectral line is Doppler broadened with a Gaussian lineshape, the second order correlation functions is given by:

  42. Summary: correlations in classical light

  43. HBT experiments with photons • The number of counts registered on a photon counting detector is proportional to the intensity

  44. Photon bunching and antibunching • Perfectly coherent light has Poissonian photon statistics • Bunched light consists of photons clumped together

  45. Photon bunching and antibunching • In antibunched light, photons come out with regular gaps between them

  46. Experimental demonstration of photon antibunching • Antibunching effects are only observed if we look at light from a single atom

  47. Experimental demonstration of photon antibunching • Antibunching has been observed from many other types of light emitters

  48. Bibliography • Fundamentals of Photonics, Saleh & Teich, Wiley 1991 • Quantum Optics: An introduction, Mark Fox, Oxford University Press 2006 • Hamamatsu MMPC datasheet (online) • PerkinElmer APCM datasheet (online) • Golts’man G., SSPD, APL 79(6),2001, 705-707 • Hanbury Brown, R. , and Twiss, R. Q. , Nature, 177, 27 (1956) • Hanbury Brown, R. , and Twiss, R. Q. , Nature, 178, 1046 (1956)

More Related