1 / 7

Armdroid 1000

Learn how to program the Armdroid 1000 using the G-2000 mode. Understand basic speed rates, torque stepper motors, and use the Insert Menu to program the robot's movements. Includes lessons on moving cylinders and understanding micro-switches.

rtroy
Download Presentation

Armdroid 1000

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. G-2000 Mode Armdroid 1000 Programming the Armdroid G-3000 Mode Next

  2. G-2000 Mode • Type G-2000 hit return • Press M to get into the main menu • Press B to find out the basic rate of speed • Press C to change the basic rate of speed 010= slowest rate 002=fastest rate • Press T to torque stepper motors • Press I to get into the Insert Menu Return to Home

  3. G-3000 Mode • Type G-3000 then hit return • Press 0 (not zero) and select option 1-4 • Press B to find out the basic rate of speed • Press C to change to the desired speed • Press T torque stepper motors • Press I get into the Insert Menu Return to Home

  4. Armdroid 1000 Return to home Lesson 1 ProgramRobot tomove cylinder from C1 – C2 Lesson 2 Understanding Micro-switches

  5. Armdroid 1000 • Once you are in the insert menu you are ready to start • programming. • 1=open fingers Q= close fingers • 2=rotate fingers clock wise W= rotate fingers counter clockwise • 3= raise wrist E= lower wrist • 4=raise arm R=lower arm • 5=raise shoulder T=lower shoulder • 6=rotate base clockwise Y=rotate base counter clockwise • 7=rotate external motor cw U=rotate external motor ccw • After you have move d the robot to a desired position hit • the “.” key to save that movement. • If you don’t want that movement don’t put a “.” after it. Back

  6. Armdroid 1000 • From the home position--- program your robot in G-2000 • to pick-up a cylinder at C1 and move it to C2. • Save the appropriate steps necessary to execute this task. • Hit E for execute • Then O(nce) or F (orever) Back to lesson page

  7. Armdroid 1000 The micro-switches used in this unit have four lead wires: • Blue wire that is NC (normally closed) = on • Yellow wire that is NO (normally open) = of • Two Black wires that can be used with either • the blue or yellow wire. To use micro-switches you must define a “wait period” first. • Position robot in the wait position • Define a wait period by: pressing the ?/shift key • at the same time. Back to Lessons page Back to Mr Hoellein’s Web Page

More Related