1 / 8

ZTF Field Flattener 12 segment designs 22 mm thick window

ZTF Field Flattener 12 segment designs 22 mm thick window. P. Jelinsky 2012/11/27. Revision History. Assumptions. Distance from flattener to CCD is >= 2mm Distance from filter to window between 15 and 110 mm Distance from window to flatteners between 3 and 110 mm

ronald
Download Presentation

ZTF Field Flattener 12 segment designs 22 mm thick window

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ZTF Field Flattener12 segment designs22 mm thick window P. Jelinsky 2012/11/27

  2. Revision History

  3. Assumptions • Distance from flattener to CCD is >= 2mm • Distance from filter to window between 15 and 110 mm • Distance from window to flatteners between 3 and 110 mm • Allow distance from corrector to mirror to vary • Center Window thickness = 22mm • Window, filter and flattenersare Fused Silica • Optimize over 5 wavelengths in the g’, r’ bands as below (allowing a focus change). • Optimize over 9 field points in each detector • Merit function is the 2D FWHM (RMS radius * 2.3548) • Use RMS field map with 50 x 50 points

  4. Detector Gap • If t is the thickness of the flattener, d is the distance from detector to the flattener, c is the chamfer of the flattener, g is the gap between the flatteners, f is the f/# of the beam, n is the index of refraction of the glass, and s is the spacing between the detectors, then • For g = 2mm, c = 1mm, t = 5mm, d=2mm, f=2.5, n = 1.8 then s = 6 mm • I assumed 8.4 mm in the following analysis Field Flattener Detector

  5. Schematic Filter Window 12 flatteners 12 detectors

  6. Detector Layout • Two Detectors layouts have been studied • Minimize the gap in each direction (slightly asymmetrical, need 3 detectors in Zemax) • Place detectors centers on a square grid (symmetrical, need 2 detectors in Zemax) Field locations for minimum gap Field locations for square grid

  7. Minimize the gap • RMS field map settings • Ray density = 6 • Data = Spot Radius • Wavelength = All • Method = Gauss Quad • Center field = 5 • Refer To = Centroid • X field size = 0.8655 • Y field size = 0.8655 • X field sampling = 50 • Y field sampling = 50 • Surface = Image • Use the text->Window->Copy clipboard to place the data into excel for analysis

  8. Minimize the Gap (cont) • PTF Corrector Distance = 6075.3 mm; Original Corrector Distance = 6122.4 mm • (A) = asphere • (S) = sphere

More Related