1 / 11

Thoughts on High Data Rate 802.11

Thoughts on High Data Rate 802.11. Jim Tomcik QUALCOMM, Incorporated 5775 Morehouse Drive San Diego, CA, 92121 +1 (858)-658-3231 jtomcik@qualcomm.com. Note: The Text Associated with this Presentation Appears in the Power Point Notes Page View. WLAN Service Drivers and Requirements.

Download Presentation

Thoughts on High Data Rate 802.11

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thoughts onHigh Data Rate 802.11 Jim Tomcik QUALCOMM, Incorporated 5775 Morehouse Drive San Diego, CA, 92121 +1 (858)-658-3231 jtomcik@qualcomm.com Note: The Text Associated with this Presentation Appears in the Power Point Notes Page View James D. Tomcik, QUALCOMM, Incorporated

  2. WLAN Service Drivers and Requirements • Extensions of Wireless Operator’s Network • Video • High Fidelity Audio • Toll quality voice • Potential Offload of Cellular/PCS Network • Data Rate Requirements: • voice: 32 kbps • audio: > 192 kbps • video: 1.2 mbps (MPEG1) to 35 mbps (HDTV) • Service Requirements • Delay - minimize buffering (e.g. interleaving, processing) • Jitter - minimize delay variations • Guaranteed QoS –perhaps via bandwidth reservation • Potentially “Many” Users James D. Tomcik, QUALCOMM, Incorporated

  3. Data Rate Requirements James D. Tomcik, QUALCOMM, Incorporated

  4. 802.11- DCF Mode James D. Tomcik, QUALCOMM, Incorporated

  5. 802.11 PCF mode • Contention-free period uses short interframe space • Every packet ACK’ed James D. Tomcik, QUALCOMM, Incorporated

  6. 802.11e HCF mode • Single ACK for up to 16 packets James D. Tomcik, QUALCOMM, Incorporated

  7. Can Reservation Based Systems do Better?HiperLAN2 Frame Format Example • Data portion of frame remains ~fixed • Roughly 80% efficient James D. Tomcik, QUALCOMM, Incorporated

  8. 802.11a/HiperLAN High Rate Performance Achieved Throughput (Mbps) • Extrapolated rates of 128-384Mbps • OFDM symbol packing inefficiency not included • Fraction of OFDM symbol wasted at end of 1500-byte ethernet packet *- 300msec frame required, long delay for initiating transfer **- 54byte LCF packet must be modified for 128-384Mbps rates James D. Tomcik, QUALCOMM, Incorporated

  9. 802.11- MAC Key Issues • DCF Mode (asynchronous): • inefficient for high data rates • fraction of “dead” air-time increases • e.g. 54 Mbps rate in 802.11a has < 50% thruput efficiency • For higher rates: • < 25% thruput efficiency for rates exceeding 100 Mbps • PCF Mode (polled) efficiency increased marginally • 3msec contention period required (802.11a) • ACK still follows each packet • HCF Mode (802.11e, standard work in progress) • Polled mode with burst ACK improves efficiency • Still has significant dead air time • QoS is best effort, not guaranteed • Turn-around times are short • real time decoding becomes problematic at high speeds • Decoding more bits – tougher to do James D. Tomcik, QUALCOMM, Incorporated

  10. Conclusions • Advanced Service Offerings Require High Data Rates to Serve Reasonable Numbers of Users • Typical “hotspot” application may entail 20-50 users or more • NG WLAN system requires an Improved MAC • maintain efficiency for high data rates • guaranteed QoS • low delay & jitter • Random Access Protocols can be Inefficient • wasted capacity (dead air time) is the main cause • “dead air time” makes it easier to decode ever increasing numbers of bits, however! • Reservation-based Structures: • Can maintain efficiency as data rate scales • May meet QOS Constraints More Directly • Efficiency reduced with increased user loads (initiation of transfer difficult) James D. Tomcik, QUALCOMM, Incorporated

  11. James D. Tomcik, QUALCOMM, Incorporated

More Related