1 / 2

Steps for a Good Basement Finish

Before you start your project, there are a few things that you should know. First make sure you follow the right procedure. Therefore, get permits from the right authority and be prepared. <br><br>Visit: http://www.withtone.com/steps-for-a-good-basement-finish/

Download Presentation

Steps for a Good Basement Finish

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Steps for a Good BasementFinish Before you start your project, there are a few things that you should know. First make sure you follow the right procedure. Therefore, get permits from the right authority and be prepared. What is more is that the plan will enable you to create a budget. The result will ensure you are ready for theproject. Secondly, make sure the room is dry. This will require you to check the dampness of the room. Finally, be ready with the necessarytools. Having understood the above points, the next and final point is the actual construction. Below are the necessary steps that you can follow to finish yourbasement: Clearing the WorkArea This involves cleaning the room and removing any unwanted material that could be a barrier. Additionally, you can also prepare the room by fixing the electric wires, putting up a ceiling and drying thefloor. Framing theWalls It is considered as the first real step in finishing the basement. Begin by measuring the walls and mark areas where the frames will fit. In order to make the walls strong the framework is also supposed to bestrong. PlumbingInstallations The layout should be ready before installing rough-in pipes. Therefore, after the installation tests should be done. This will certify that the pipes do not leak and the work cancontinue. Electricity and HVACInstallations This site can be sensitive and would require a person with the necessary knowledge. Thus, I recommend that these insulations should be done by aprofessional. All the switches, outlets and sources of light should be safely installed. Air conditioning should also be done by a person that will be able to install HVAC systemefficiently. Wall and Ceiling After you are through with the installations, check if the room is dry. Then start fitting the wall and then the ceiling. Depending on the material you are using, they should all fitperfectly. Furthermore, you should make sure they are drywalls.

  2. Final Touches andPainting Smooth the walls and the ceiling, and then clear off all the tools. The basement will then have a clear room which you can paint. The color that you pick should be one that you budgeted and planedfor. Floor The floor is usually the last step as you finish the room. When building the floor, ensure it is dry. Once you are finished with the floor of the basement bring in thefurniture. Most of the work involved in finishing your basement requires a professional. Thus, I would recommend you get a contractor to work for you. In conclusion, I would recommend that you get this projectstarted. Articles Source :http://www.withtone.com/steps-for-a-good-basement-finish/

More Related