1 / 19

Tim Marker

Round Robin 5 Test Results for Proposed Insulation Burnthrough Test Standard. Tim Marker. FAA Technical Center. Special Thanks to the following contributors:. The Mexmil Company. Orcon Corportion. TexTech Industries. Johns-Manville. Facile Holdings. Osaka Gas. Dupont.

robert
Download Presentation

Tim Marker

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Round Robin 5 Test Results for Proposed Insulation Burnthrough Test Standard Tim Marker FAA Technical Center

  2. Special Thanks to the following contributors: The Mexmil Company Orcon Corportion TexTech Industries Johns-Manville Facile Holdings Osaka Gas Dupont

  3. Round Robin Testing Objective: To identify problems with the test and equipment through systematic testing of identically-prepared samples. Progress: Several problems have been identified, analyzed, and corrected Burner components (stators and fuel nozzle) Burner configuration (angle of stator, distance between stators) Method of calibration (timing) Impact of altitude Goal: Perfect correlation between all labs

  4. Round Robin 5 (Material A) Fiberglass, 2 Layers, 0.60 lb/ft3 (Material B) Fiberglass, 2 Layer/Aramid Felt, 2 Layers (Material C) Fiberglass, 2 Layer/Pre-Ox PAN felt, 1 Layer (Material D) Oxidized PAN, 2 Layers, 0.47 lb/ft3 (Material E) Heat Stabilized, OPF, 2 Layers, 0.60 lb/ft3 (Material F) Heat Stabilized, OPF, 3 Layers, 0.42 lb/ft3

  5. RR5 Testing Sequence

  6. Summary First test series since recalibration of all heat flux transducers by FAATC; interlab calibration heat flux data correlation increased over previous RR. However, actual test results indicate no correlation between calibrated heat flux and measured burnthrough time (i.e., high HF does not equal short BT time) First test series since request for recalibration of air velocity meters; how many were actually recalibrated? Initial results indicate higher than expected data scatter. Possible cause(s) of this include: 1. Differences in burner air flow as a result of measurement technique 2. Characteristic of certain types of materials 3. Equipment-related malfunction 4. Operational-related malfunction (interpretation of failure)

More Related