1 / 13

First steps toward γ from B + →D 0 (K 0 π + π - )K + with

First steps toward γ from B + →D 0 (K 0 π + π - )K + with. Tom Barber, Val Gibson, Cristina Lazzeroni and Jim Libby. Measuring γ : B + →D 0 (K 0 π + π - )K +. γ is the weak phase between b→cus (  V cb ) and b→ucs (  V ub )

roana
Download Presentation

First steps toward γ from B + →D 0 (K 0 π + π - )K + with

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. First steps toward γfrom B+→D0(K0π+π-)K+ with Tom Barber, Val Gibson, Cristina Lazzeroni and Jim Libby LHCb UK Meeting, Dublin

  2. Measuring γ: B+→D0(K0π+π-)K+ • γ is the weak phase between b→cus (Vcb) and b→ucs (Vub) • g can be extracted from the interference of these two processes in charged BD0K decays with D0/D0 decaying to a common final state • rBis the relative colour suppression between the two modes O(0.1) – dilutes sensitivity to γ • δ is the strong phase difference-invariant under CP • Several methods available to extract γ from two-body decays of the D0/D0(Gronau-London-Wyler and Atwood-Dunietz-Soffer) • Requires 3+charge conjugate modes to extract the parameters • some of these modes have very small BFs which are not observed with current B-factory statistics • Will be interesting for LHCb (see reoptimised TDR for GLW): but γ ambiguities and doubly Cabbibo suppressed decays interfere No need for a time-dependent analysis LHCb UK Meeting, Dublin

  3. Measuring γ: B+→D0(K0π+π-)K+ PRD 63, 036005 (2001) and PRD 68, 054018 (2003) • A method proposed by ADS/Giri, Grossman, Soffer and Zupan alleviates some of the problems by utilising three body Cabbibo allowed decays of the D0/D0 • BR(D0→K0π+π-)=(5.97±0.35)% • BR(D0→K+K-)=(3.89±0.14)×10-3% • Also, large strong phases between the intermediate resonances allows the the extraction of rB, δ and γ by studying the Dalitz distribution of events where LHCb UK Meeting, Dublin

  4. Not everything in black and white makes sense 2nd derivative of likelihood w.r.t. γ • Regions of the Dalitz plot with the largest interferences are most sensitive to γ • Need good model for Dalitz amplitudes • Belle/Babar have use an isobar model with: ρ(770) Doubly Cabbibo suppressed K* Breit-Wigner + non-resonant LHCb UK Meeting, Dublin

  5. Measuring the Dalitz model • B-factories use a O(100k) samples of D+*→D0π+,D0→K0π+π- to measure amplitudes and phases-vary model for systematics • LHCb can exploit these and results from CLEO-c K*(892) ρ(770) DCS K*(892) LHCb UK Meeting, Dublin

  6. γ(deg) 1σ 2σ Measuring γ: B+→D0(K0π+π-)K+ hep-ex/0504039 B+ B- g = 70°±31°±11°±13° D* and D combined Exp. systematic Dalitz Model error Belle do significantly better: reason is measured rB=0.21±0.08 rB vs σ() PRD 70, 072003 (2004) g = 68°±14°±13°±11° LHCb UK Meeting, Dublin

  7. Selection studies so far (T. Barber) • Selection to maximise signal to background: • 1 year signal yield = 6300 • No events in 1.6×105 incl. B and 3×104 min. bias • Limited statistic samples • Selection in DC04v2 stripping • Currently being revisited but a very promising start LL K0S DD K0S LHCb UK Meeting, Dublin

  8. Next steps: selection and backgrounds • Understanding Dalitz acceptance key to the analysis • Assessing this from Tom’s selection • Selection optimisation and improvement • Understand and cross check current selection, then • Optimisation non-standard due to extraction from fit to Dalitz space and importance of systematic uncertainties • Statistical limits in background MC samples • Sideband techniques for data • Good understanding of Dalitz distribution of background LHCb UK Meeting, Dublin

  9. π+ π- B+ D0 π+ K0S IP π- K+ HLT • K0S complicates this significantly • Only long tracks: • 30% of selected signal events LL K short • εHLT/track ≈93%, therefore 5-track efficiency ≈70% • overall reduces yield to 1300/annum • Including DD non-trivial as topology is under constrained for a kinematic fit • No need to panic yet as B-factories are performing measurements with 5 times less statistics-but clearly increased yields desirable LHCb UK Meeting, Dublin

  10. Event model • Complex Dalitz model required: • Current simulation phase space: • OK for Dalitz efficiency then reweight to any model….. • unless the correlations amongst the daughters distort Dalitz acceptance • In LHCb isobar model already implemented for B0→D0 K* studies • Want event model in LHCb framework and • Standalone: acceptance studies and fitting • K-matrix • Transfer BABAR/Belle/CLEO-C measurements LHCb UK Meeting, Dublin

  11. B+→D0(K0K+K-)K+ • Same method works with π→K in D0decay • Reduced BF: • BF(D0→K0K+K-) = (1.03±0.10)% • BF(D0→K0 π +π-) = (5.97±0.35)% • But using RICH info maybe a big help for background suppression • Dalitz model has less resonances but complex threshold effects (Babar hep-ex/0507026) • what is the sensitivity to γ? • Generated samples in Cambridge to study in parallel to the Kππ mode PDG ‘04 LHCb UK Meeting, Dublin

  12. Outlook • Other issues to feedback to the optimization studies: • fitting for γ,  and rB and • systematics • Understanding acceptance, B+→D0(K0K+K-)K+ and HLT first • Looking forward to a successful Oxbridge collaboration….. LHCb UK Meeting, Dublin

  13. LHCb UK Meeting, Dublin

More Related