250 likes | 255 Views
ARC Training Tools. Alabama Retail is committed to partnering with our members to create and keep safe workplaces. Be sure to check out all of the training tools that are available in our Safety Library. This training tool is brought to you by. PPE: Foot Protection. Session Objectives.
E N D
ARC Training Tools • Alabama Retail is committed to partnering with our members to create and keep safe workplaces. • Be sure to check out all of the training tools that are available in our Safety Library. This training tool is brought to you by
Session Objectives • You will be able to: • Identify foot hazards • Choose appropriate footwear for work tasks • Know the limitations of foot protection • Use and take care of protective equipment
Foot Injury Statistics • 180,000 foot-related injuries • 400 injuries per day • $6,000 per injury • 1,509 lost-time injuries
Foot Hazard Review • Falling objects • Rolling objects • Objects piercing the sole • Exposure to electrical hazards
Other Foot Hazards • Slippery walking surfaces • Wet or muddy conditions • Hazardous chemicals • Cold weather conditions
Falling Objects • Steel toe • Composite cap • Strap-on toe guards
Metatarsal Protection • Protection from falling and rolling objects for upper part of the foot • Boots with external protection • Strap-on metatarsal guards
Rolling Objects • Ankle protection • Steel shank in the heel • Sides protected by steel shanks • Toe and metatarsal protection
Puncture Resistant • Prevent penetration by sharp objects • Have a hard, dense sole • Have steel shank in the sole
Slip Resistant • Street shoes are not intended for slip resistance • Soft rubber soles are slip resistant • Sole has tread with channels • Still need to walk carefully
Electrical Hazards • Wear nonconductive shoes • Reduce potential electrical shock • Exposure to 600 volts or less
Electro-Static Dissipative • Reduce static electricity • Conduct charge from body to ground • Have low electrical resistance • Wear around flammable or explosive materials • Wear near sensitive electronic equipment
Conductive Shoes • Minimize static electricity • Reduce ignition of volatile chemicals • Discharge static into grounded floors • Should not be worn near electrical hazards
Chemical Resistance • Exposure to liquid chemicals, acids, caustics • Boot material resistant to specific chemical • Made of rubber, PVC, neoprene, or vinyl
Wet or Muddy Conditions • Boots to keep feet dry • Made of PVC or rubber
Cold Conditions • Use a special insulated liner in: • Freezing outdoor conditions • Refrigerated environments
Foot Hazards and Footwear—Any Questions? • Any questions about workplace hazards to your feet and the different footwear features that will protect against those hazards?
Capabilities and Limitations • ANSI standard • Manufacturer’s tags • No protection unless identified on tag
Comfort and Fit • Fit and comfort • Plantar fasciitis and heel pain • Ankle, knee, low back pain • Insoles • Orthotics
Cleaning Footwear • Brush off dust and debris • Spray mud off with water • Decontaminate chemical-resistant shoes • Dry before storage
Storing Footwear • Clean before storage • Protect from dirt and chemicals • Prevent unnecessary damage
Inspecting Footwear • Inspect before each use • Check toe and metatarsal protection • Check for holes, tears, cracks • Check soles for excessive wear • Discard damaged or defective footwear
Limitations, Use, and Care—Any Questions? • Any questions about the limitations, use, and care of protective footwear?
Key Points to Remember • Know the foot hazards in your workplace • Wear footwear with appropriate protective features for the job • Know the capabilities and limitations of protective footwear • Check comfort, fit, and support of footwear • Clean, store, and inspect footwear