1 / 13

ATI field calibration

ATI field calibration. Prepared by Robert Albee , NOAA, Boulder, CO. Sonic Axis definations. W axis response used for temperature calculations. HyperTerminal. Connect with settings 9600, 7, E, 1. Data flow display once connected. U axis, V axis, W axis, Temperature C.

Download Presentation

ATI field calibration

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. ATI field calibration Prepared by Robert Albee , NOAA, Boulder, CO

  2. Sonic Axis definations W axis response used for temperature calculations

  3. HyperTerminal Connect with settings 9600, 7, E, 1

  4. Data flow display once connected U axis, V axis, W axis, Temperature C

  5. Keystroke the “Esc” key The Main Menu should appear. Be extremely careful at this point. This is keystroke driven and mistakes could occur.

  6. Choose “D” for Calibration

  7. Keystroke Y (no echo in my case) This would be the air temperature of inside the box. Do the best you can, but not critical. Try to stay within +- .5C if possible. Humidity +- 2% is also acceptable.

  8. Place “Zero-Air Chamber” on Axis Using rubber / elastic bands to secure box works quite well.

  9. Choose Axis W is chosen with this demonstration

  10. 1 Axis Calibration Complete Perform this task with all 3 axis’ . “Enter Key” returns to Menu.

  11. After completion choose number 0 to exit.

  12. Data flow This demonstrates an acceptable W axis with the box still attached with calculated temperature.

  13. Thank-you for your dilligence and hard work! It may be noticable after a few days the calculated temperature may drift. This is not of great concern since that is not a reflection of wind turbulent measurements.

More Related