1 / 57

OBJECTS 1-10

OBJECTS 1-10. Directions. Each object that is completed you will receive 10 points. When you complete all 10 objects you need to have Ms. Bevan check them. OBJECT 1. Draw your shape this size. .75. 1.75. .75. 2.0. Extrude 4.25 inches. Change the Material to Wood (Birch).

reia
Download Presentation

OBJECTS 1-10

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. OBJECTS 1-10

  2. Directions • Each object that is completed you will receive 10 points. • When you complete all 10 objects you need to have Ms. Bevan check them.

  3. OBJECT 1

  4. Draw your shape this size. .75 1.75 .75 2.0

  5. Extrude 4.25 inches

  6. Change the Material to Wood (Birch)

  7. Save as: OBJECT 1 (To your H: technology folder)

  8. OBJECT 2

  9. Draw shape to the correct size and extrude 5 7/8 inches 1.75 1.875

  10. Change the Material to Wood (Cherry)

  11. Save as: OBJECT 2 (To your H: technology folder)

  12. OBJECT 3

  13. Draw this shape the correct size. 4.5 1.5 3.5 1.75 8.0

  14. Extrude 1.75 inches

  15. Change Material to Wood (Maple)

  16. Save as: OBJECT 3 (To your H: technology folder)

  17. OBJECT 4

  18. Draw shape the correct size 1.5 1.25 3.75 1.75 1.25 4.75

  19. Extrude .75 inches

  20. Change Material to Wood (Oak)

  21. Save as: OBJECT 4 (To your H: technology folder)

  22. OBJECT 5

  23. Draw shape correct size 1.75 4.375

  24. Start a new 2D sketch on this surface Extrude 1.75 inches

  25. Draw a new rectangle the correct size and distance from the edge. .625 .5 1.75 .75

  26. Extrude so that a hole goes all the way through

  27. Change Material to Wood (Oak)

  28. Save as: OBJECT 5 (To your H: technology folder)

  29. OBJECT 6

  30. 1.0 Draw this shape the correct shape and size 1.75 2.75 5.0

  31. Extrude 1.5 inches Start new 2D sketch on this surface

  32. Create a rectangle , the correct size at the edge .75 2.0

  33. Use the Cut command in the Extrude dialog window to remove the piece

  34. Change the Material to Wood (Walnut)

  35. Save as: OBJECT 6 (To your H: technology folder)

  36. OBJECT 7

  37. Sketch the shape to the size shown 3.75 1.0 1.0 2.0 .75 3.75

  38. Extrude 1.5 inches

  39. Change Material to Wood (Oak)

  40. Save as: OBJECT 7 (To your H: technology folder)

  41. OBJECT 8

  42. Sketch the shape to the correct size 3.0 .5 .5 1.75 1.5 3.25 1.75 1.75 6.75

  43. Extrude 1.75 inches

  44. Change Material to Wood (Birch)

  45. Save as: OBJECT 8 (To your H: technology folder)

  46. OBJECT 9

  47. Sketch the shape to the correct size. 3.5 3.5 1.0 1.0 1.0

  48. Extrude 1.75 inches Start a new 2D sketch on this surface

  49. Sketch the following shape at the correct size 1.75 .75

  50. Extrude the entire shape the full distance

More Related