1 / 32

Lecture # 3

Lecture # 3. Rock, soil and Minerals Instructor: Dr. Attaullah Shah. Department of Civil Engineering City University of Science and IT Peshawar. Outlines of the Presentation. Rock, soil and Minerals Identification of minerals: Physical properties Common rock forming minerals.

rdebose
Download Presentation

Lecture # 3

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture # 3 Rock, soil and Minerals Instructor: Dr. Attaullah Shah Department of Civil Engineering City University of Science and IT Peshawar.

  2. Outlines of the Presentation • Rock, soil and Minerals • Identification of minerals: Physical properties • Common rock forming minerals

  3. Minerals and Rock Mineralsare naturally occurring inorganic substances of more or less definite chemical composition, displaying more or less definite physical properties and regular crystalline structure. A mineral is a naturally occurring solid formed through geological processes that has a characteristic chemical composition, a highly ordered atomic structure, and specific physical properties. The study of minerals is called mineralogy. However, the International Mineralogical Association in 1995 adopted a new definition: A mineral is an element or chemical compound that is normally crystalline and that has been formed as a result of geological processes. 5

  4. Minerals and Rock Rocks: A rock, by comparison, is an aggregate of minerals and/or mineraloids, and need not have a specific chemical composition. Minerals range in composition from pure elements and simple salts to very complex silicates with thousands of known forms. Geologist define rock as aggregates or mass composed of one or more commonly, several of minerals. There are few exceptions to this rule: not all rocks are composed of minerals-for example, coal. Engineers (or contractor) define rock to be a ‘hard, durable material that can’t be excavated without blasting’. The definition is based on strength and durability. Can you name some names of Rocks and Minerals?

  5. Minerals and Rock • Mineralsare naturally occurring inorganic substances of more or less definite chemical composition, displaying more or less definite physical properties. • As the basic constituent of rock, minerals control much of rock behavior. • Some minerals are very strong and resistant to deterioration and produce rock with similar properties, while others are much softer and produce weaker rock. • More than different 2000 minerals are present in the earth’s crust. They can be identified by their physical and chemical properties; by standard tests; or by examination under microscope. 8

  6. Identification of minerals • Color • Streak • Hardness: Mohs scale of hardness • Cleavage • Fracture • Luster 9

  7. Identification of minerals • Color: Color indicates the appearance of the mineral in reflected light or transmitted light for translucent minerals (i.e. what it looks like to the naked eye). • Some minerals have characteristics color due to composition of the minerals and the arrangement of the constituent atoms: for example black color of magnetite, green COLOR of chlorite and brassy yellow color of pyrite. • Minerals like quartz and calcite have variable color. • Color can’t be sole identification property • Color change with impurities present. For example Quartz, which is colourless when pure, may be white, grey, pink or yellow, when certain chemical impurities or included particles are present. • Streak: • Color of mineral in powdered form is called streak. • Powder is obtained by crushing the mineral. • Color of the streak differs from color of mineral: for example the color of pyrite is brass yellow and its streak is dark green. 10

  8. Identification of minerals • Cleavage: • The cleavage of the minerals is its capacity to split more readily in certain directions than in others, due to the arrangement of the atoms. • Minerals break with ease producing smooth surfaces is called perfect cleavage. It can be either good, distinct, indistinct and imperfect. • Some minerals such as micahave perfect cleavage in one direction. The feldspars, which is the most abundant of all minerals, have two cleavages. 11

  9. Identification of minerals • Luster: • Appearance of mineral in ordinary light (that is the appearance due to reflected light). Luster may be metallic, glassy, earthy, pearly or silky. • If the minerals looks metal as do galena and pyrite, its luster is said to be metallic. If the minerals looks glassy, like quartz, its luster is glassy. • Metallic – high reflectivity like metal: galena and pyrite • Sub-metallic – slightly less than metallic reflectivity: magnetite • Non-metallic luster: • Adamantine – brilliant, the luster of diamond also cerussite and anglesite • Vitreous – the luster of a broken glass: quartz • Pearly – iridescent and pearl-like: talc and apophyllite • Resinous – the luster of resin: sphalerite and sulfur • Silky – a soft light shown by fibrous materials: gypsum and chrysotile • Dull/earthy – shown by finely crystallized minerals: the kidney ore variety of hematite

  10. Identification of minerals • Fracture • Describes how a mineral breaks when broken contrary to its natural cleavage planes. • Chonchoidal fracture is a smooth curved fracture with concentric ridges of the type shown by glass. • Hackley is jagged fracture with sharp edges. • Fibrous • Irregular

  11. Identification of minerals • Hardness: • The hardness of a mineral, as commonly determined on fresh material, is measured by its ability to resist scratching. If a mineral is scratched by a knife, it is softer than the knife. If it cannot be scratched by a knife, the two are equal hardness or the mineral is the harder. • Hardness is tested by attempting to scratch the minerals of the scale with the specimen under examination. • In order to have a standard method of expressing hardness of minerals, a simple scale, known as the Mohs scale, has been universally adopted. 15

  12. Identification of minerals • In sequence of increasing hardness from 1 to 10, the following minerals are used as standard of comparison: • Talc 01 - Gypsum 02 - Calcite 03 - Fluorite 04 - Apatite 05 • Orthoclase (feldspar) 06 - Quartz 07 -Topaz 08 - Corundum 09 and • Diamond -10 • A mineral which scratches calcite, for example, but not fluorspar, is said to have a hardness between 3 and 4, or H = 3-4. Talc and gypsum can be scratched with a finger-nail, and a steel knife will cut apatite (5) and perhaps feldspar (6), but not quartz (7). Soft glass can be scratched by quartz. The hardness test, in various forms, is simple, easily made, and useful; it is a ready means for distinguishing, for example, between quartz and calcite.

  13. Identification of minerals • Other Characteristics: • Crystal Form: Internal atomic arrangement in definite geometric patterns is sometimes outwardly expressed in crystal form. • Specific Gravity is meant the weight of a substance compared with the weight of an equal volume of water. The specific gravity of quartz is 2.65. Some minerals are heavy than the others. The specific gravity of majority minerals range from 2.55 to 3.2. • Magnetism: A few minerals are attracted by a magnet. Of these minerals, magnetite, and pyrrhotite are the most common examples. • Other properties: • Fluorescence (response to ultraviolet light), • Radioactivity, tenacity (response to mechanical induced changes of shape or form), • Piezoelectricity ( Can generate electric fields) and • Reactivity to dilute acids. 18

  14. Quartz-Carbonate class Kohinoor-Dimond Hallite-Oxide class

  15. Rock Forming Minerals • Basic/Primary minerals (Silicate minerals) • The olivine group • The pyroxene group • The amphibole group • The mica group • The feldspar group • The feldspathoid group • Accessory minerals • Minerals that occur as small crystals and in limited quantities are described as accessory • Secondary minerals • Described under this head are the minerals chlorite, serpentine, talc, kaolin, epidote and zeolite, all of which result from the alteration of pre-existent minerals • Clay minerals: Clays can form as either primary or secondary minerals. Here they are grouped under one heading because of their economic importance,

  16. Rock Forming Minerals • Feldpars: • Feldspar is the most abundant minerals. There are two types. Orthoclase feldspars contain potassium (KalSi3O8) and usually range from white to pink. Plagioclase feldspars contain sodium (NaAlSi3O8), calcium (CaAl2Si2O8) or both, and range from white to gray to black,. Feldspars have moderate hardness. • Quartz is also very common ingredient in many kinds of rock. It is silicate (SiO2), and usually has a translucent to milky white color. The luster is vitreous. Quartz is harder than most minerals (hardness 7), and thus is very resistant to weathering. Chert is a type of quartz sometimes found in sedimentary rocks. It can cause problem when used as concrete aggregate. 21

  17. Mica: Translucent thin sheets or flakes. There are two common varieties. Muscovite is potassium aluminum silicate of colorless or silvery tint, pearly luster and especially one very perfect cleavage which permits the mineral to be split into thin elastic sheets that when bent spring back to shape. Biotite, the other common variety, is a complex silicate of potassium, magnesium and iron and aluminum.

  18. Rock Forming Minerals • Mica:Biotite and muscovite are similar in physical properties. Both are soft, 2.5-3, with one perfect cleavage. The sheets of mica have very low coefficient of friction, which can produce shear failure in certain rocks, such as schist. • Ferromagnesian minerals: A class of minerals, all of which contain both iron and magnesium. This class includes pyroxene, amphibole, hornblende and olivine. These minerals are dark color and a moderate hardness. 23

  19. Rock Forming Minerals • Calcite: A mineral made of calcium carbonate (CaCO3). It is usually white, pink or gray. It is soluble in water, and thus can be transported by ground water into cracks in rock where it precipitate out of solution. It also can precipitate in soil, becoming a cementing agent. Calcite is much softer then quartz or feldspar. The hardness is 3. Have vigorous reaction to hydrochloric acid. • Dolomite: Similar to calcite with magnesium added. Less vigorous reaction to dilute hydrochloric acid.

  20. Rock Forming Minerals • Iron Oxides: Another class of minerals, all of which contain iron (FeO3). The most common iron oxides are hematite, Fe2O3 ;hydrous iron oxide that are often called limonite and magnetite. Although less common, these minerals give a distinctive rusty color to some rocks and soils and can act as cementing agents. The compact varieties have a hardness of 5.5-6, but earthy form are soft. The luster is sub-metallic. • Gypsum: A soft minerals often occurring as a precipitate in sedimentary rocks. It is colorless to white and has economic value when found in thick deposits. For example, it is used to make drywall. Gypsum is water soluble and thus can dissolve under the action of ground water, which can lead to other problems. 25

  21. Role of Geological Survey of Pakistan • The Geological Survey of Pakistan is responsible for the study of geology of the country in all pertinent details and to assess its geological resource potential. • It undertakes: • Geological mapping and other geoscientific surveys, • Basic and applied research in earth sciences, • Scientific investigations for an accurate understanding of the country’s geological resources and their prudent management, and • Environmental geology and hydrogeological studies

  22. Geology Survey of Pakistan

  23. Minerals in Pakistan

  24. Latest Findings

More Related