1 / 44

Laser Compton Polarized e + Source for ILC

Laser Compton Polarized e + Source for ILC. Tsunehiko OMORI (KEK). Compton meeting@LAL 24/Apr/2006. ILC : International Linear Collider. DR. e - lineac. e + lineac. DRs. ~ 50 km. E cm = 500 - 1000 GeV. start experiment at ~2015. Polarized Beams play important role

ranit
Download Presentation

Laser Compton Polarized e + Source for ILC

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Laser Compton Polarized e+ Source for ILC Tsunehiko OMORI (KEK) Compton meeting@LAL 24/Apr/2006

  2. ILC: International Linear Collider DR e-lineac e+ lineac DRs ~ 50 km Ecm = 500 - 1000 GeV start experiment at ~2015 Polarized Beams play important role Suppress back ground Increase rate of interaction (if both beam pol) Solve Week mixing of final state

  3. Two ways to get pol. e+ (1) Helical Undurator e- beam E >150 GeV Undulator L > 150 m (2) Laser Compton

  4. Two ways to get pol. e+ (1) Helical Undurator e- beam E >150 GeV Undulator L > 150 m Our Proposal (2) Laser Compton

  5. Why Laser Compton ? i) Positron Polarization. ii) Independence Undulator-base e+ : use e- main linac Problem on design, construction, commissioning, maintenance, Laser-base e+ : independent Easier construction, operation, commissioning, maintenance iii) Low energy operation Undulator-base e+ : need deccelation Laser-base e+ : no problem

  6. ILC Undulator-base e+ Source 150 GeV 250 GeV 250 GeV Experiments

  7. Today’s talk Proof-of-Principle demonstration at KEK-ATF (ATF-Compton collab.) Experiment at KEK, just finished 2. Concept of Laser Based Polarized e+ Source for ILC Simulation study & Plan of Experimental R/D(Cavity-Compton)

  8. 1. Experiment at KEK-ATF ATF: Accelerator Test Facility for ILC built at KEK ATF-Compton collaboration: Waseda, TMU, NRIS, AIST, and KEK 120 m

  9. ATF Experiment@KEK i) proof-of-principle demonstration ii) accumulate technical imformation: polarimetry, beam diagnosis, … No Optical Cavity at Collision Point

  10. Compton Chamber

  11. g-rayMeasured Asymmetry A= -0.93± 0.15 % A= 1.18± 0.15 % laser pol. = - 79 % laser pol. = + 79 % M. Fukuda et al., PRL 91(2003)164801

  12. Ne+ = 3 x 104/bunch Pol(expected) = 77% Asym (expected) = 0.95%

  13. Measure e+ polarization : use Bremsstrahlung g-ray g-ray polarized e+ E = 40 MeV Pb conveter calculation

  14. e+ polarization (e+ run) T. Omori et al., PRL 96 (2006) 114801 e+ beam spin e- spin in Iron A(R)= +0.60 ± 0.25% e+ beam spin e- spin in Iron A(L)= -1.18 ± 0.27% e+ beam spin non e- spin in Iron A(0)= -0.02 ± 0.25%

  15. e+ run T. Omori et al., PRL 96 (2006) 114801 A = 0.90 ± 0.18 % Pol. = 73 %

  16. Summary of Experiment 1) The experiment was successful. High intensity short pulse polarized e+ beam was firstly produced. Pol. ~ 73 ± 15(sta) ± 19(sys) % T. Omori et al., PRL 96 (2006) 114801 2) We confirmedpropagation of the polarization from laser photons -> g-rays -> and pair created e+s & e-s. 3) We established polarimetry of short pulse & high intensity g-rays, positrons, and electrons.

  17. 2. Concept of Compton polarized e+ source for ILC Collaborating Institutes: BINP, CERN, DESY, Hiroshima, IHEP, IPN, KEK, Kyoto, LAL, NIRS, NSC-KIPT, SHI, and Waseda SakaeArakiYasuoHigashiYousukeHondaMasaoKurikiToshiyukiOkugi TsunehikoOmoriTakashiTaniguchiNobuhiroTerunuma, JunjiUrakawaXArtruMChevallier, VStrakhovenko, EugeneBulyakPeterGladkikhKlausMeonig, RobertChehabAlessandroVariolaFabianZomerFrankZimmermann, KazuyukiSakaueTachishigeHiroseMasakazuWashioNoboruSasaoHirokazuYokoyamaMasafumiFukuda KoichiroHiranoMikioTakanoTohruTakahashiHirokiSatoAkiraTsunemiand JieGao

  18. Summer 2004 ITRP(International Technology Recommendation Panel) technology choice : cold LC (ILC) cold LC : super conduction RF cavity for accel.

  19. Before Summer 2004 Conceptual Design for warm LC T. Omori et al., NIM A500 (2003) 232-252 Ne+=1.2x1010/bunch

  20. After Summer 2004 Study Compton applied to a cold LC. New and Improved design Full use of slow repetition rate (5Hz)

  21. ILC requirements

  22. ILC requirements 2x1010 e+/bunch (hard) 2800 bunches/train (hard) 5 Hz (we have time to store e + s) Strategy Old: Design for warm LC make positrons at once. both electron & laser beams: throw away T. Omori et al., NIM A500 (2003) 232-252 New: Design for cold LC (ILC) make positrons in 100 m sec. Electron storage ring, laser pulse stacking cavity : Re-use !!! positron stacking ring. Basic Idea: K. Moenig P. Rainer

  23. Laser Pulse Stacking Cavity Fabry-perot Resonator Input laser (YAGlaser) Energy 0.7 mJ/bunch 3.077 nsec bunch spacing train length = 50 msec Cavity Enhancement Factor =1000 Laser pulse in cavity 700 mJ/bunch single bunch in a cavity

  24. Schematic View of Whole System

  25. ILC: International Linear Collider DR e-lineac e+ lineac DRs ~ 50 km

  26. Schematic View of Whole System

  27. Schematic View of Whole System This part is necessary for ILC, no matter what e+ production scheme is chosen.

  28. We also have Experimental R/D Plan for Comptom Pol. e+ Source

  29. Plan: Exprmntl R/D at KEK Hiroshima-Waseda-LAL-Kyoto-CERN-KEK Collaboration Make a fist prototype single cavity Lcav = 420 mm . Put it in ATF ring Oct. 2006

  30. Make a fist prototype single cavity Lcav = 420 mm . Put it in ATF ring Oct. 2006 detail Sato's talk

  31. Summary of ILC source design Laser based scheme is good candidate of ILC polarized e+ source. We have new Idea make positrons in 100 m sec. Electron storage ring laser pulse stacking cavities positron stacking ring (= e+ DRs) 2x1010 e+/bunch x 2800 bunches @ 5Hz with polarization ( ~ 60%) Some values are extrapolation from old design. We need detailed simulation. We plan to put prototype laser cavity in ATF.

  32. Slides to answer questions

  33. Polarization Measurement e+ beam pol. (laser pol) e- spin in iron (magnet pol.) expected value (MC) ) Calculate A R A(R) : A(R) ~ + 0.95 % ) Calculate A A(L) : A(L) ~ - 0.95 % L ) Calculate A 0 non (Liner) A(0) : A(0) = 0

  34. We did e- run, also. e- run e+ run

  35. e- polarization (e- run) e- beam spin e- spin in Iron A(R)= +0.78 ± 0.27% e- beam spin e- spin in Iron A(L)= -0.97 ± 0.27% e- beam spin non e- spin in Iron A(0)= -0.23 ± 0.27%

  36. e- run A = 0.89 ± 0.19 %

  37. Asymmetry Measurements e- run e+ run A = 0.90 ± 0.18 % A = 0.89 ± 0.19 % T. Omori et al., arXiv:hep-ex/0508026 KEK Preprint 2005-56

  38. 2.0 1.6 1.2 0.8 0.4 1.6 1.2 0.8 0.4 CO2 ring YAG ring Ng/electron/turn (in all energy of g-ray) 0 10 20 30 40 50 Turns 0 20 40 60 80 100 Turns Compton Ring (e- storage Ring) Average Ng/turn (in 23-29 MeV) CO2 : 1.78x1010 /turn YAG : 1.36x1010 /turn (average in 50 turns) (average in 100 turns)

  39. i-th bunch on j-th DR turn -0.03 0.03 dEnergy/Energy e+ in a bucket Time -0.4 0.4 Longitudinal Pos. (m) e+ stacking in Damping Ring (simulation) 1st bnch on 1st trn 5th bnch on 5th trn 10th bnch on 10th trn T=0 ~110 msec before 11th bnch on 941st trn 11th bnch on 942nd trn 15th bnch on 946th trn ~10 msec before 21st bnch on 1882nd trn 20th bnch on 951st trn 100th bnch on 8479th trn ~10 msec + 110 msec ~20 msec ~100 msec + 110 msec 100 bnchs on 9410th trn 100 bnchs on 18820th trn stacking loss = 18% in total ~110 msec ~200 msec

More Related