1 / 21

Thermocouples

Thermocouples. Most frequently used method to measure temperatures with an electrical output signal. What are thermocouples?.

randycolon
Download Presentation

Thermocouples

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Thermocouples Most frequently used method to measure temperatures with an electrical output signal.

  2. What are thermocouples? • Thermocouples operate under the principle that a circuit made by connecting two dissimilar metals produces a measurable voltage (emf-electromotive force) when a temperature gradient is imposed between one end and the other. • They are inexpensive, small, rugged and accurate when used with an understanding of their peculiarities.

  3. Thermocouples Principle of Operation • In, 1821 T. J. Seebeck observed the existence of an electromotive force (EMF) at the junction formed between two dissimilar metals (Seebeck effect). • Seebeck effect is actually the combined result of two other phenomena, Thomson and Peltier effects. • Thomson observed the existence of an EMF due to the contact of two dissimilar metals at the junction temperature. • Peltier discovered that temperature gradients along conductors in a circuit generate an EMF. • The Thomson effect is normally much smaller than the Peltier effect.

  4. Let’s take a look at this circuit

  5. How thermocouples work • It is generally reasonable to assume that the emf is generated in the wires, not in the junction. The signal is generated when dT/dx is not zero. • When the materials are homogeneous, e, the thermoelectric power, is a function of temperature only. • Two wires begin and end at the same two temperatures. Generally, a second order Eqn. is used.

  6. Material EMF versus Temperature With reference to the characteristics of pure Platinum Chromel Iron emf Copper Platinum-Rhodium Alumel Constantan Temperature

  7. Thermocouple Effect • Any time a pair of dissimilar wires is joined to make a circuit and a thermal gradient is imposed, an emf voltage will be generated. • Twisted, soldered or welded junctions are acceptable. Welding is most common. • Keep weld bead or solder bead diameter within 10-15% of wire diameter • Welding is generally quicker than soldering but both are equally acceptable • Voltage or EMF produced depends on: • Types of materials used • Temperature difference between the measuring junction and the reference junction

  8. Thermocouple Tables (EMF-Temperature) • Thermocouple tables correlate temperature to emf voltage. • Need to keep in mind that the thermocouple tables provide a voltage value with respect to a reference temperature. Usually the reference temperature is 0°C. If your reference junction is not at 0°C, a correction must be applied using the law of intermediate temperatures.

  9. Reference Temperature Systems and Zone Boxes • Ice Baths • Accurate and inexpensive • Electronically Controlled References • Require periodic calibration and are generally not as stable as ice baths, but are more convenient.

  10. Zone boxes • A zone of uniform temperature that insures all connections made within the zone are at the same temperature.

  11. What thermocouple materials should be used? • Depends on requirements: • Temperature range? • Required accuracy • Chemical resistance issues • Abrasion or vibration resistance • Installation requirements (size of wire) • Thermal conduction requirements

  12. Thermocouple Material Vs EMF Types T, J, and K are most commonly used thermocouples (see Table 16.8 of the “Handbook”).

  13. Simple TC Model “EMF-Temperature Sketch” 1 • Two materials • Material A (+) • Material B (-) • Plus and minus refers to how the emf changes with temperature. Number junctions around circuit and draw 2 3 3 B Measured Emf 2 emf A 1 T meter T junction Temperature

  14. Law of Intermediate Metals 2) Insertion of an intermediate metal into a thermocouple circuit will not affect the emf voltage output so long as the two junctions are at the same temperature and the material is homogeneous. • Permits soldered and welded joints.

  15. A Demonstration of the Law of Intermediate Metals 6 1 2 4 5 3 6 4 Fe (+) C (-) P (+) C Measured Emf 5 emf 3 2 Fe 1 Signs of the materials used T ref T 2 and 4 T measured Tcandle Temperature

  16. Law of Intermediate Temperatures If a thermocouple circuit develops a net emf1-2 for measuring junction temperatures T1 and T2, and a net emf2-3 for temperatures T2 and T3, then it will develop a net voltage of emf1-3 = emf1-2 + emf2-3 when the junctions are at temperatures T1 and T3. emf1-2+emf2-3= emf1-3 T2 T1 T3 T2 T1 T3

  17. A Demonstration of the Law of Intermediate Temperatures emf1-2+emf2-3= emf1-3 C emf23 emf13 emf emf12 Fe T 1 T 2 T 3

  18. A Demonstration of the Law of Intermediate Temperatures 4 5 3 1 2 Hot Zone 4 C 2 3 Measured Emf emf Fe 1 T ref T hot T measured

  19. If a thermocouple circuit of materials A and C generates a net emfA-C when exposed to temperatures T1 and T2, and a thermocouple of materials C and B generates a net emfC-B for the same two temperatures T1 and T2, then a thermocouple made from materials A and B will develop a net voltage of emfA-B = emfA-C + emfC-B between temperatures T1 and T2. • Sometimes useful in the calibration of different thermocouple wires.

  20. Single and multiplexing

  21. Temperature Measurement Errors • Conduction • Convection • Radiation • Response Time • Noise • Grounding issues and shorts, especially on metal surfaces

More Related