1 / 21

CHAPTER 8

CHAPTER 8. Phase Diagrams. 8-1. Introduction. Phase: A region in a material that differs in structure and function from other regions. Phase diagrams: Represents phases present in metal at different conditions (Temperature, pressure and composition).

rana-dillon
Download Presentation

CHAPTER 8

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. CHAPTER 8 Phase Diagrams 8-1

  2. Introduction • Phase: A region in a material that differs in structure and function from other regions. • Phase diagrams: • Represents phases present in metal at different conditions (Temperature, pressure and composition). • Indicates equilibrium solid solubility of one element in another. • Indicates temperature range under which solidification occurs. • Indicates temperature at which different phases start to melt. 8-2

  3. Phase Diagram of Pure Substances • Pure substance exist as solid, liquid and vapor. • Phases are separated by phase boundaries. • Example : Water, Pure Iron. • Different phases coexist at triple point. Figure 8.2 Figure 8.1 8-3 After W. G. Moffatt, et al., “The Structure and Properties of Materials,” vol I: “Structure,” Wiley, 1965, p.151

  4. Gibbs Phase Rule P = number of phases that coexist in a system C = Number of components F = Degrees of freedom • P+F = C+2 • For pure water, at triple point, 3 phases coexist. • There is one component (water) in the system. • Therefore 3 + F = 1 + 2 F = 0. • Degrees of freedom indicate number of variables that can be changed without changing number of phases. 8-4

  5. Cooling Curves • Used to determine phase transition temperature. • Temperature and time data of cooling molten metal is recorded and plotted. • Thermal arrest : heat lost = heat supplied by solidifying metal • Alloys solidify over a range of temperature (no thermal arrest) Pure Metal Iron

  6. Binary Isomorphous Alloy Systems Mixture of two systems Two component system • Binary alloy • Isomorphous system: Two elements completely soluble in each other in liquid and solid state. • Example: Cu-Ni solution. Composition at liquid and solid phases at any temperature can be determined by drawing a tie line. Figure 8.3 8-5 Adapted from “Metals Handbook,” vol. 8, 8th ed., American society of Metals, 1973, p. 294.

  7. Phase Diagram from Cooling Curves • Series of cooling curves at different metal composition are first constructed. • Points of change of slope of cooling curves (thermal arrests) are noted and phase diagram is constructed. • More the number of cooling curves, more accurate is the phase diagram. Figure 8.4 8-6

  8. The Lever Rule • The Lever rule gives the weight % of phases in any two phase regions. Wt fraction of solid phase = Xs = w0 – w1 ws – w1 Wt fraction of liquid phase = X1 = ws – w0 ws – w1 Figure 8.5 8-7

  9. Non Equilibrium Solidification of Alloys • Very slow cooling (equilibrium) gives rise to cored structure. • Rapid cooling delays solidification. • Homogenization: Cast ingots heated • to elevated temperature to eliminate • cored structure. • Temperature of homogenization • must be lower than lowest melting • point of any of the alloy components. Figure 8.7 Figure 8.8 8-8

  10. Binary Eutectic Alloy System • In some binary alloy systems, components have limited solid solubility. Example : Pb-Sn alloy. • Eutectic composition freezes • at lower temperature than all • other compositions. • This lowest temperature is • called eutectic temperature. Figure 8.11 Eutectic temperature α solid solution + β solid solution Liquid Cooling 8-9

  11. Liquid at 3000C. At about 2450C first solid forms – proeutectic solid. Slightly above 1830C composition of alpha follows solidus and composition of sn varies from 40% to 61.9%. At eutectic temperature, all the remaining liquid solidifies. Slow Cooling of 60% Pb – 40% Sn alloy Figure 8.12 Figure 8.13 • Further cooling lowers alpha Sn content and beta Pb. 8-10 From J. Nutting and R. G. Baker, “Microstructure of Metals,” Institute of Metals, London, 1965,p.19.

  12. Various Eutectic Structures • Structure depends on factors like minimization of free energy at α / β interface. • Manner in which two phases nucleate and grow also affects structures. Figure 8.14 8-11 After W. C. Winegard, “An Introduction to the Solidification of Metals,” Institute of Metals, London, 1964.

  13. Binary Peritectic Alloy System • Peritectic reaction: Liquid phase reacts with a solid phase to form a new and different solid phase. Liquid + α β cooling • Peritectic reaction occurs • when a slowly cooled alloy • of Fe-4.3 wt% Ni passes • through Peritectic • temperature of 15170C. • Peritectic point is invariant. Figure 8.16 cooling Liquid(5.4 wt% Ni) + δ (4.0 wt% Ni) γ 4.3 wt % Ni 8-12

  14. At 42.4 % Ag & 14000C Phases present LiquidAlpha Composition 55% Ag 7%Ag Amount of Phases 42.4 –7 55-42.4 55 – 7 55 - 7 = 74% = 26% At 42.4% Ag and 11860C – ΔT Phase Present Beta only Composition 42.4% Ag Amount of Phase 100% At 42.4% Ag and 11860C + ΔT Phases present LiquidAlpha Composition 66.3% Ag 10.5%Ag Amount of Phases 42.4 –10.5 66.3-42.4 66.3 – 10.5 66.3–10.5 = 57% =43% Peritectic Alloy System Figure 8.17 Figure 8.18 8-13

  15. Rapid Solidification in Peritectic System • Surrounding or Encasement: During peritectic reaction, L+ α β , the beta phase created surrounds primary alpha. • Beta creates diffusion barrier resulting in coring. Figure 8.19 Figure 8.20 8-14 After F Rhines, “ Phase Diagrams in Metallurgy,”McGraw- Hill, 1956, p. 86.

  16. Binary Monotectic Systems • Monotectic Reaction: Liquid phase transforms into solid phase and another liquid. L1α + L2 Cooling • Two liquids are immiscible. • Example:- Copper – Lead • system at 9550C and 36% Pb. Table 8.1 Eutectic Eutectoid Peritectic Peritectoid Monotectic Figure 8.23 8-15 Metals Handbook,” vol. 8: “Metallography Structures and Phase Diagrams,” 8th ed., American Society of Metals, 1973, p. 296.

  17. Terminal phases: Phases occur at the end of phase diagrams. Intermediate phases: Phases occurin acomposition range inside phase diagram. Examples: Cu-Zn diagram has both terminal and intermediate phases. Five invariant peritectic points and one eutectic point. Intermediate Phases and Compounds Figure 8.25 “Metals Handbook,” vol. 8: “Metallography Structures and Phase Diagrams,” 8th ed., American Society of Metals, 1973, p. 301 8-16

  18. Intermediate Phases in Ceramics • In Al2O2 – SiO2 system, an intermediate phase called Mullite is formed, which includes the compound 3Al2O3.2SiO2. Figure 8.26 8-17 After A. G. Guy, “Essentials of Materials Science, “McGraw-Hill, 1976

  19. Intermediate Compounds • In some phase diagrams, intermediate compound are formed – Stoichiometric • Percent Ionic/Covalent bond depends on electronegativeness • Example:- Mg-Ni phase diagram contains • Mg2Ni : Congruently melting compound • MgNi2 : Incongruently melting compound. Figure 8.27 8-18 Metals Handbook,” vol. 8: American Society of Metals, 1973, p. 314.

  20. Ternary Phase Diagrams • Three components • Constructed by using a equilateral triangle as base. • Pure components at each • end of triangle. • Binary alloy composition • represented on edges. Figure 8.28 Temperature can be represented as uniform throughout the Whole Diagram Isothermal section. 8-19

  21. Ternary Phase Diagram (Cont..) • Example:- Iron-Chromium-Nickel phase diagrams. • Isothermal reaction at 6500C • for this system • Composition of any metal • at any point on the phase • diagram can be found by • drawing perpendicular • from pure metal corner to • apposite side and calculating • the % length of line at that • point Figure 8.30 8-20 After “Metals Handbook,” vol. 8: American Society of Metals, 1973, p. 425.

More Related