1 / 11

TEAM MIEUX

Parts and Manufacturing Processes Team MIEUX – ASME Design Competition October 28, 2004 Stefan Campbell Carlos Celada Chris Villani Laurel Weiske. TEAM MIEUX. Motors. Driving Motors LynxMotion #GHM-13 $29.95 Counterbalance Motor Lynxmotion #PGHM-15 $24.95. TEAM MIEUX.

rafe
Download Presentation

TEAM MIEUX

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Parts and Manufacturing Processes Team MIEUX – ASME Design Competition October 28, 2004 Stefan Campbell Carlos Celada Chris Villani Laurel Weiske TEAM MIEUX

  2. Motors • Driving Motors • LynxMotion #GHM-13 $29.95 • Counterbalance Motor • Lynxmotion #PGHM-15 $24.95 TEAM MIEUX

  3. Electronic Components – Switches and Solenoid • Double Pole Double Throw • Used to control each motor (4) • Jameco #75951 $1.50 • Single Pole Single Throw • Controls the solenoid for rice discharge • Jameco #76241 $1.49 • Solenoid • Opens the Rice container • Jameco #262166 $9.95 TEAM MIEUX

  4. Tires and Hubs • Tires • 1.5” Wide 2.12” Diameter • Lynxmotion #TSR-02 $14.75/pair • Hubs • Directly mounted to the tires and motor • Lynxmotion #HUB-02 $8.00/pair TEAM MIEUX

  5. Power Supply • Batteries • Energizer Rechargeable • Batteries.com #314608 $14.74/4 pack • Charger • RadioShack #23-428 $29.99 • Battery Holders • RadioShack #270-387/270-382 $1.79/$1.89 • Battery Holder Snaps (9V style) • RadioShack #210-325 $1.99 • Power Interconnect • Jameco #142228 $5.25 TEAM MIEUX

  6. Chassis • Each side manufactured using • the CNC machine • 3/8” HDPE • Connected by support braces • with screws • Manufactured using mill • 1/8” HDPE • Supporting braces for rice • container • Manufactured using mill • 3/8” HDPE TEAM MIEUX

  7. Counterbalance System • Counterbalance Arms • Arms connected to chassis using shoulder • screws and flanged wheel bearings to allow • for sufficient rotation • Arms attached to counterweight by screws • Manufactured using CNC machine from • 3/8” HDPE material • Counterweight • Manufactured on cutting mill from 1/4” • HDPE • 1/8” HDPE cover slips into machined slot • Crank • Manufactured from 3/8” HDPE on CNC machine • Attached to motor using a hub and to arm through • a pin in the machined slot TEAM MIEUX

  8. Rice Container • Manufactured from 1/8” HDPE • Blocks of 3/8” HDPE in each • corner • Screws used to connect the • sides together TEAM MIEUX

  9. Shaft and Timing Belt • Shaft attached to front wheels • One pulley mounted on shaft and one mounted • on the motor, which is attached to braces within • the chassis • $4.40 each ordered from Stockdrive.com • Timing belt placed around two pulleys • to transfer power from motor to shaft • $4.59 ordered from Stockdrive.com TEAM MIEUX

  10. TEAM MIEUX

  11. TOTAL:$331.31 Additional Monies will need to be allocated for fasteners and manufacturing tools QUESTIONS??? TEAM MIEUX

More Related