Introductory Chemistry , 3 rd Edition Nivaldo Tro

1. Introductory Chemistry, 3rd EditionNivaldo Tro Chapter 12 Liquids, Solids, and Intermolecular Forces Roy Kennedy Massachusetts Bay Community College Wellesley Hills, MA 2009, Prentice Hall

2. Interactions Between Molecules • Many of the phenomena we observe are related to interactions between molecules that do not involve a chemical reaction. • Your taste and smell organs work because molecules in the thing you are sensing interact with the receptor molecule sites in your tongue and nose. • In this chapter, we examine the physical interactions between molecules and the factors that effect and influence them. Tro's Introductory Chemistry, Chapter 12

3. The Physical States of Matter • Matter can be classified as solid, liquid, or gas based on what properties it exhibits. • Fixed = Keeps shape when placed in a container. • Indefinite = Takes the shape of the container. Tro's Introductory Chemistry, Chapter 12

4. Structure Determines Properties • The atoms or molecules have different structures in solids, liquids, and gases, leading to different properties. Tro's Introductory Chemistry, Chapter 12

5. Properties of the States of Matter:Gases • Low densities compared to solids and liquids. • Fluid. • The material exhibits a smooth, continuous flow as it moves. • Take the shape of their container(s). • Expand to fill their container(s). • Can be compressed into a smaller volume. Tro's Introductory Chemistry, Chapter 12

6. Properties of the States of Matter:Liquids • High densities compared to gases. • Fluid. • The material exhibits a smooth, continuous flow as it moves. • Take the shape of their container(s). • Keep their volume, do not expand to fill their container(s). • Cannot be compressed into a smaller volume. Tro's Introductory Chemistry, Chapter 12

7. Properties of the States of Matter:Solids • High densities compared to gases. • Nonfluid. • They move as an entire “block” rather than a smooth, continuous flow. • Keep their own shape, do not take the shape of their container(s). • Keep their own volume, do not expand to fill their container(s). • Cannot be compressed into a smaller volume. Tro's Introductory Chemistry, Chapter 12

8. The Structure of Solids, Liquids, and Gases Tro's Introductory Chemistry, Chapter 12

9. Gases • In the gas state, the particles have complete freedom from each other. • The particles are constantly flying around, bumping into each other and their container(s). • In the gas state, there is a lot of empty space between the particles. • On average. Tro's Introductory Chemistry, Chapter 12

10. Gases, Continued • Because there is a lot of empty space, the particles can be squeezed closer together. Therefore, gases are compressible. • Because the particles are not held in close contact and are moving freely, gases expand to fill and take the shape of their container(s), and will flow. Tro's Introductory Chemistry, Chapter 12

11. Liquids • The particles in a liquid are closely packed, but they have some ability to move around. • The close packing results in liquids being incompressible. • But the ability of the particles to move allows liquids to take the shape of their container and to flow. However, they don’t have enough freedom to escape and expand to fill the container(s). Tro's Introductory Chemistry, Chapter 12

12. Solids • The particles in a solid are packed close together and are fixed in position. • Though they are vibrating. • The close packing of the particles results in solids being incompressible. • The inability of the particles to move around results in solids retaining their shape and volume when placed in a new container, and prevents the particles from flowing. Tro's Introductory Chemistry, Chapter 12

13. Solids, Continued • Some solids have their particles arranged in an orderly geometric pattern. We call these crystalline solids. • Salt and diamonds. • Other solids have particles that do not show a regular geometric pattern over a long range. We call these amorphous solids. • Plastic and glass. Tro's Introductory Chemistry, Chapter 12

14. Why Is Sugar a Solid, ButWater Is a Liquid? • The state a material exists in depends on the attraction between molecules and their ability to overcome the attraction. • The attractive forces between ions or molecules depends on their structure. • The attractions are electrostatic. • They depend on shape, polarity, etc. • The ability of the molecules to overcome the attraction depends on the amount of kinetic energy they possess. Tro's Introductory Chemistry, Chapter 12

15. Properties and Attractive Forces Tro's Introductory Chemistry, Chapter 12

16. Phase Changes:Melting • Generally, we convert a material in the solid state into a liquid by heating it. • Adding heat energy increases the amount of kinetic energy of the molecules in the solid. • Eventually, they acquire enough energy to partially overcome the attractive forces holding them in place. • This allows the molecules enough extra freedom to move around a little and rotate. Tro's Introductory Chemistry, Chapter 12

17. Phase Changes:Boiling • Generally, we convert a material in the liquid state into a gas by heating it. • Adding heat energy increases the amount of kinetic energy of the molecules in the liquid. • Eventually, they acquire enough energy to completely overcome the attractive forces holding them together. • This allows the molecules complete freedom to move around and rotate. Tro's Introductory Chemistry, Chapter 12

18. Properties of Liquids:Surface Tension • Liquids tend to minimize their surface—a phenomenon we call surface tension. • This tendency causes liquids to have a surface that resists penetration. • The stronger the attractive force between the molecules, the larger the surface tension. Tro's Introductory Chemistry, Chapter 12

19. Surface Tension • Molecules in the interior of a liquid experience attractions to surrounding molecules in all directions. • However, molecules on the surface experience an imbalance in attractions, effectively pulling them in. • To minimize this imbalance and maximize attraction, liquids try to minimize the number of molecules on the exposed surface by minimizing their surface area. • Stronger attractive forces between the molecules = larger surface tension. Tro's Introductory Chemistry, Chapter 12

20. Properties of Liquids:Viscosity • Some liquids flow more easily than others. • The resistance of a liquid’s flow is called viscosity. • The stronger the attractive forces between the molecules, the more viscous the liquid is. • Also, the less round the molecule’s shape, the larger the liquid’s viscosity. • Some liquids are more viscous because their molecules are long and get tangled in each other, causing them to resist flowing. Tro's Introductory Chemistry, Chapter 12

21. Escaping from the Surface • The process of molecules of a liquid breaking free from the surface is called evaporation. • Also known as vaporization. • Evaporation is a physical change in which a substance is converted from its liquid form to its gaseous form. • The gaseous form is called a vapor. Tro's Introductory Chemistry, Chapter 12

22. Evaporation • Over time, liquids evaporate—the molecules of the liquid mix with and dissolve in the air. • The evaporation happens at the surface. • Molecules on the surface experience a smaller net attractive force than molecules in the interior. • All the surface molecules do not escape at once, only the ones with sufficient kinetic energy to overcome the attractions will escape. Tro's Introductory Chemistry, Chapter 12

23. Escaping the Surface • The average kinetic energy is directly proportional to the Kelvin temperature. • Not all molecules in the sample have the same amount of kinetic energy. • Those molecules on the surface that have enough kinetic energy will escape. • Raising the temperature increases the number of molecules with sufficient energy to escape.

24. Escaping the Surface, Continued • Since the higher energy molecules from the liquid are leaving, the total kinetic energy of the liquid decreases, and the liquid cools. • The remaining molecules redistribute their energies, generating more high energy molecules. • The result is that the liquid continues to evaporate . Tro's Introductory Chemistry, Chapter 12

25. Factors Effecting the Rate of Evaporation • Liquids that evaporate quickly are called volatile liquids, while those that do not are called nonvolatile. • Increasing the surface area increases the rate of evaporation. • More surface molecules. • Increasing the temperature increases the rate of evaporation. • Raises the average kinetic energy, resulting in more molecules that can escape. • Weaker attractive forces between the molecules = faster rate of evaporation. Tro's Introductory Chemistry, Chapter 12

26. Reconnecting with the Surface • When a liquid evaporates in a closed container, the vapor molecules are trapped. • The vapor molecules may eventually bump into and stick to the surface of the container or get recaptured by the liquid. This process is called condensation. • A physical change in which a gaseous form is converted to a liquid form. Tro's Introductory Chemistry, Chapter 12

27. Dynamic Equilibrium • Evaporation and condensation are opposite processes. • Eventually, the rate of evaporation and rate of condensation in the container will be the same. • Opposite processes that occur at the same rate in the same system are said to be in dynamic equilibrium. Tro's Introductory Chemistry, Chapter 12

28. Evaporation and Condensation Shortly, the water starts to evaporate. Initially the rate of evaporation is much faster than rate of condensation When water is just added to the flask and it is capped, all the water molecules are in the liquid. Eventually, the condensation and evaporation reach the same speed. The air in the flask is now saturated with water vapor. Tro's Introductory Chemistry, Chapter 12

29. Vapor Pressure • Once equilibrium is reached, from that time forward, the amount of vapor in the container will remain the same. • As long as you don’t change the conditions. • The partial pressure exerted by the vapor is called the vapor pressure. • The vapor pressure of a liquid depends on the temperature and strength of intermolecular attractions. Tro's Introductory Chemistry, Chapter 12

30. Boiling • In an open container, as you heat a liquid the average kinetic energy of the molecules increases, giving more molecules enough energy to escape the surface. • So the rate of evaporation increases. • Eventually, the temperature is high enough for molecules in the interior of the liquid to escape. A phenomenon we call boiling. Tro's Introductory Chemistry, Chapter 12

31. Boiling Point • The temperature at which the vapor pressure of the liquid is the same as the atmospheric pressure is called the boiling point. • The normal boiling point is the temperature required for the vapor pressure of the liquid to be equal to 1 atm. • The boiling point depends on what the atmospheric pressure is. • The temperature of boiling water on the top of a mountain will be cooler than boiling water at sea level. Tro's Introductory Chemistry, Chapter 12

32. Temperature and Boiling • As you heat a liquid, its temperature increases until it reaches its boiling point. • Once the liquid starts to boil, the temperature remains the same until it all turns to a gas. • All the energy from the heat source is being used to overcome all of the attractive forces in the liquid. Tro's Introductory Chemistry, Chapter 12

33. Energetics of Evaporation • As it loses its high energy molecules through evaporation, the liquid cools. • Then the liquid absorbs heat from its surroundings to raise its temperature back to the same as the surroundings. • Processes in which heat flows into a system from the surroundings are said to be endothermic. • As heat flows out of the surroundings, it causes the surroundings to cool. • As alcohol evaporates off your skin, it causes your skin to cool. Tro's Introductory Chemistry, Chapter 12

34. Energetics of Condensation • As it gains the high energy molecules through condensation, the liquid warms. • Then the liquid releases heat to its surroundings to reduce its temperature back to the same as the surroundings. • Processes in which heat flows out of a system into the surroundings are said to be exothermic. • As heat flows into the surroundings, it causes the surroundings to warm. Tro's Introductory Chemistry, Chapter 12

35. Heat of Vaporization • The amount of heat needed to vaporize one mole of a liquid is called the heat of vaporization. • DHvap • It requires 40.7 kJ of heat to vaporize one mole of water at • 100 °C. • Always endothermic. • Number is +. • DHvap depends on the initial temperature. • Since condensation is the opposite process to evaporation, the same amount of energy is transferred but in the opposite direction. • DHcondensation = −DHvaporization Tro's Introductory Chemistry, Chapter 12

36. Heats of Vaporization of Liquidsat Their Boiling Points and at 25 °C Tro's Introductory Chemistry, Chapter 12

37. kJ mol H2O g H2O Example 12.1—Calculate the Mass of Water that Can Be Vaporized with 155 KJ of Heat at 100 °C. Given: Find: 155 kJ g H2O Solution Map: Relationships: 1 mol H2O = 40.7 kJ, 1 mol = 18.02 g Solution: Check: Since the given amount of heat is almost 4x the DHvap, the amount of water makes sense.

38. Example 12.1: Calculate the amount of water in grams that can be vaporized at its boiling point with 155 kJ of heat. Tro's Introductory Chemistry, Chapter 12

39. Write down the given quantity and its units. Given: 155 kJ Example:Calculate the amount of water in grams that can be vaporized at its boiling point with 155 kJ of heat. Tro's Introductory Chemistry, Chapter 12

40. Write down the quantity to find and/or its units. Find: ? g H2O Information: Given: 155 kJ Example:Calculate the amount of water in grams that can be vaporized at its boiling point with 155 kJ of heat. Tro's Introductory Chemistry, Chapter 12

41. Collect needed conversion factors: DHvap = 40.7 kJ/mol  40.7 kJ  1 mol H2O 18.02 g H2O = 1 mol H2O Information: Given: 155 kJ Find: g H2O Example:Calculate the amount of water in grams that can be vaporized at its boiling point with 155 kJ of heat. Tro's Introductory Chemistry, Chapter 12

42. Write a solution map for converting the units: Information: Given: 155 kJ Find: g H2O Conversion Factors: 40.7 kJ = 1 mol; 18.02 g = 1 mol Example:Calculate the amount of water in grams that can be vaporized at its boiling point with 155 kJ of heat. kJ mol H2O g H2O Tro's Introductory Chemistry, Chapter 12

43. Apply the solution map: Information: Given: 155 kJ Find: g H2O Conversion Factors: 40.7 kJ = 1 mol; 18.02 g = 1 mol Solution Map: kJ → mol → g Example:Calculate the amount of water in grams that can be vaporized at its boiling point with 155 kJ of heat. = 68.626 g H2O • Significant figures and round: = 68.6 g H2O Tro's Introductory Chemistry, Chapter 12

44. Check the solution: Information: Given: 155 kJ Find: g H2O Conversion Factors: 40.7 kJ = 1 mol; 18.02 g = 1 mol Solution Map: kJ → mol → g Example:Calculate the amount of water in grams that can be vaporized at its boiling point with 155 kJ of heat. 155 kJ of heat can vaporize 68.6 g H2O. The units of the answer, g, are correct. The magnitude of the answer makes sense since it is more than one mole. Tro's Introductory Chemistry, Chapter 12

45. Practice—How Much Heat Energy, in kJ, is Required to Vaporize 87 g of Acetone, C3H6O, (MM 58.08) at 25 C? (DHvap = 31.0 kJ/mol) Tro's Introductory Chemistry, Chapter 12

46. g C3H6O mol C3H6O kJ Practice—How Much Heat Energy, in kJ, Is Required to Vaporize 87 g of Acetone, C3H6O, (MM 58.08) at 25 C? (DHvap = 31.0 kJ/mol), Continued Given: Find: 87 g C3H6O kJ Solution Map: Relationships: 1 mol C3H6O = 31.0 kJ at 25 C, 1 mol = 58.08 g Solution: Check: Since the given mass is than one mole, the answer being greater than DHvap makes sense.

47. Temperature and Melting • As you heat a solid, its temperature increases until it reaches its melting point. • Once the solid starts to melt, the temperature remains the same until it all turns to a liquid. • All the energy from the heat source is being used to overcome some of the attractive forces in the solid that hold them in place. Tro's Introductory Chemistry, Chapter 12

48. Energetics of Melting and Freezing • When a solid melts, it absorbs heat from its surroundings, it is endothermic. • As heat flows out of the surroundings, it causes the surroundings to cool. • As heat flows out of your drink into the ice cubes (causing them to melt), the liquid gets cooler. • When a liquid freezes, it releases heat into its surroundings, it is exothermic. • As heat flows into the surroundings, it causes the surroundings to warm. • Orange growers often spray their oranges with water when a freeze is expected. Why? Tro's Introductory Chemistry, Chapter 12

49. Heat of Fusion • The amount of heat needed to melt one mole of a solid is called the heat of fusion. • DHfus • Fusion is an old term for heating a substance until it melts, it is not the same as nuclear fusion. • Since freezing (crystallization) is the opposite process of melting, the amount of energy transferred is the same, but in the opposite direction. • DHcrystal= -DHfus • In general, DHvap > DHfus because vaporization requires breaking all attractive forces. Tro's Introductory Chemistry, Chapter 12

50. Heats of Fusion of Several Substances Tro's Introductory Chemistry, Chapter 12