1 / 15

End of 2007

End of 2007. SPECTRAP’ is being built in London to trap Ca+ ions with real imaging capabilities Early RF operation expected Jan 2008 Penning operation Feb/Mar 2008. Experimental Plans. RF trap ● less complex system to start debugging a new trap

qamra
Download Presentation

End of 2007

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. End of 2007 • SPECTRAP’ is being built in London to trap Ca+ ions with real imaging capabilities • Early RF operation expected Jan 2008 • Penning operation Feb/Mar 2008

  2. Experimental Plans • RF trap ● less complex system to start debugging a new trap ● initial tests with Calcium using existing Laser system ● optimise internal/external optics and loading parameters 2. Penning trap ● investigate cloud compression using the rotating wall technique for which we already have the electronic driver in London ● look for fluorescence from Pb+ weak infrared transition at 710 nm to gain experience of low LIF levels

  3. Progress.. • Complete vacuum system assembled and tested - pressure ~10-9mbar • Trap with internal optics assembled and aligned - knife edge test • Calcium oven and filament attached – electron current to all electrodes detected and glow from oven observed • RF electronics operational - 500V@1MHz (q=0.7) or 2.6MHz

  4. Progress.. • Complete vacuum system assembled and tested - pressure ~10-9mbar • Trap with internal optics assembled and aligned - knife edge test • Calcium oven and filament attached – electron current to all electrodes detected and glow from oven observed • RF electronics operational - 500V@1MHz (q=0.7) or 2.6MHz

  5. Spherical mirror => enhancement of light collection efficiency from 1.3% to 2.5%

  6. Progress.. • Complete vacuum system assembled and tested - pressure ~10-9mbar • Trap with internal optics assembled and aligned - knife edge test • Calcium oven and filament attached – electron current to all electrodes detected and glow from oven observed • RF electronics operational - 500V@1MHz (q=0.7) or 2.6MHz

  7. Progress.. • Complete vacuum system assembled and tested - pressure ~10-9mbar • Trap with internal optics assembled and aligned - knife edge test • Calcium oven and filament attached – electron current to all electrodes detected and glow from oven observed • RF electronics operational - 500V@1MHz (q=0.7) or 2.6MHz

  8. Last week.. • First trials in RF operation - Ca+ ions not optically observed • Possible problems - wavelengths? verified by PADTRAP • - focal position of laser beams in trap? • - position of detector pinhole? • - Calcium oven not emitting as expected? • - pressure in vacuum system not good enough?

  9. Outlook • 2-3 weeks optical detection of Ca+ in RF operation • Setup of external optics for superconducting magnet - fibre optic bundle, folding mirrors etc. • 1-2 months begin Penning trap trials.

  10. Ion Trapping @ Imperial College Ca+ ion in a 0.98 Tesla trapping field 5 reds at present

More Related